This allows havily decreasing the algorithmic cost of removing all
pending active paging requests for a given subscriber once it answers
on a given BTS.
Beforehand, the whole paging queue of all BTS were iterated. Now, only
the active requests for that subscriber are iterated.
Related: SYS#6200
Change-Id: I831d0fe01d7812c34500362b90f47cd65645b666
Similar to paging:attempted, count paging:expired not only per BTS, but
also for the whole BSC. Add active_paging_requests to struct bsc_subscr,
to increase the counter only once if paging expires, and not once per
BTS where paging expired.
Related: SYS#4878
Change-Id: I9c118e7e3d61ed8c9f1951111255b196905eba4d
During LCS development, I'm getting use count bugs and would like to see use
token strings to figure it out.
Change-Id: I29bf60059d4cf7bb99a00753e6cdc149baf95f94
It does not make sense to set the bsc_subscr's LAC from a Paging Request,
especially since the paging code has loops that possibly kick off several
pagings.
At this point, there remains no code setting bsub->lac anywhere. We could set
it during rx of Complete Layer 3, but since there is no use for it besides a
vty dump, let's just drop the bsub->lac completely, and the vty dump of it.
Change-Id: Id017bd494d329b6fc254d7135b4074ac2b224d66
Use the new osmo_mobile_identity API to shed some code dup and simplify.
gsm48_paging_extract_mi() is now unused, drop.
(More refactoring to use osmo_mobile_identity follows in subsequent patch.)
Depends: If4f7be606e54cfa1c59084cf169785b1cbda5cf5 (libosmocore)
Change-Id: Id6cccaac64392b737b3bba8f3a22a88009adb23b
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: Ic6d9dafc96c9d467ae53be2cd41adcf26a4e5125
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
Pau Espin
Oliver Smith
Neels Hofmeyr