We used to have hard-coded M3UA. Let's allow the user to configure
this per MSC using a new "asp-protocol (m3ua|sua|ipa)" VTY command.
For SUA this should just work 1:1 without any trouble. For IPA,
this of course only changes the underlying transport without reflecting
the various differences in terms of BSSMAP ASSIGNMENT, MGCP handling,
etc.
Change-Id: I0800c709e574cedd7f5dd98be81c78782245cd13
Related: OS#2544
The function a_reset_free() is not used anywhere at the code. The
reason for this is that a BSC instance is never cleared once it
is started up. Also the timer number is not according to the spec.
- Remove a_reset_free()
- Fix timer identification number (T4)
- use fi->priv to hold context info
- Fix sourcecode formatting
Change-Id: I72095d52304c520e383755eee6c889bce492cbd4
Related: OS#3102
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
osmo_bsc_sigtran.c uses DRANAP instead of DMSC in two places,
this is not correct.
- change wrong DRANAP to DMSC
Change-Id: I1594d1906cf7d053d00fff52e9dc0ddfd097ed6e
There was always a 1:1 correspondence between gsm_subscriber_connection
and osmo_bsc_sccp_con, so there's really no point in having two separate
dynamically allocated data structures with pointers back and forth and
another linked list around.
Let's merge osmo_bsc_sccp_con into gsm_subscriber_connection for
simplicity.
The resulting code might not be elegant in places, but I've tried to
do only the most simple changes in this patch, while further
simplifications can be done in later subsequent patches.
As a side-effect, this patch also fixes lchan clearing if the MSC
(or the local SCCP provider) hard-disconnects the SCCP connection.
Change-Id: Idd2b733477ee90d24dec369755a00f1c39c93f39
This is a new inline function that hides all accesses to conn->bts.
A follow-up patch will then point this to conn->lchan->ts->trx->bts
to get rid of the bts field.
Change-Id: Ib6cf7097ced34eebe80441c29ab1534f21956a33
libosmo-sccp is the old sccp-lite-focused SCCP implementation that we
used before libosmo-sigtran was created. The new osmo-bsc in this
repository is using libosmo-sigtran and shouldn't be using parts of
libosmo-sccp anymore.
We only keep it around in configure.ac and Makefile.am for osmo-bsc_nat,
which is not even built in this repository anymore (or 'again yet'?)
Change-Id: I8f274be7d196cd7a5b1ec9ada949130fb06e984d
So far, if the user entered an invalid SCCP address in the config, the
osmo_bsc_sigtran_init() code simply replaced that with the default, i.e.
running with a completely different address than the user may intend.
Use the default SCCP addresses only when they are unset by the user.
Default MSC addr: set directly, do not detour via cs7 instance PC. The default
MSC SCCP addr is just a point code + SSN, deriving it from the cs7 instance
first is a confusing step. Just set the PC and SSN, and done.
Using default addresses does not constitute an "auto configuration": if we set
up a cs7 instance automatically, we do not want to have to create a second one
automatically, to prevent "auto-confusion", and want to bail instead. But for
each MSC on its own, using default SCCP addresses makes sense and is orthogonal
to automatic cs7 instance creation. Hence drop the auto config semantics from
the default SCCP address parts.
Always validate the SCCP addresses we will end up using, and bail immediately
if they are erratic. i.e. don't overwrite a non-empty invalid SCCP address with
defaults, but straight bail.
Beneficial side effects:
- Fix some grammar ultra confusion in log messages.
- Add context: log the MSC number the logging refers to.
- Drop code dup: since we're always logging the used SCCP addresses, might as
well log those once, unconditionally, in the end.
Change-Id: Iadbc2e9740457e1b389b7e7ad9c94274e7d8cb11
osmo-bsc currently negotiates the RTP stream directly with the
BTS and reports back the RTP IP/Port on the BTS. This works fine
for a single BTS, but for Handover the port/ip pointing to the
MSC side must not change, so an entity in between the BTSs and
the MSC is required.
Integrate the mgcp-client and use osmo-mgw to switch the RTP
streams.
Depends: osmo-mgw Ib5fcc72775bf72b489ff79ade36fb345d8d20736
Depends: osmo-mgw I44b338b09de45e1675cedf9737fa72dde72e979a
Depends: osmo-mgw I29c5e2fb972896faeb771ba040f015592487fcbe
Change-Id: Ia2882b7ca31a3219c676986e85045fa08a425d7a
We output a hexdump for each sccp message we receive, but not when
sending.
Also log the hexdump of sccp messages when sending.
Change-Id: Ibfe52a0b7dbca4c569c603a008d73d0d99d1c345
We already log the message type of sccp messages we receive, but
for transmitting the log output is missing.
Also log the message type for tramsitted sccp messages.
Change-Id: I6736f15ddc03e5f70c3504abffbae6cbf766c9d7
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Harald Welte
Philipp Maier
Max