Those adoc files are only used by osmo-bsc.git and openbsc.git
(osmo-nitb), and the later is deprecated and no longer maintained, which
means new features are only added to BSC. Hence it makes no sense to
keep the doc shared between both.
Change-Id: I20aa60d2f4111d66e922f3e2a73a20352ec1f7e4
This adds osmo-bsc config files for Ericsson RBS2308, Siemens BS-11 and
Nokia InSite which were working in July 2020 to get the BTS initialized,
recognized by MS and up to signalling.
Voice/TRAU support is still missing in OsmoBSC, but should be added
relatively soon.
Change-Id: I1fe15cc3654025e52fc1110ac3052fb1f7a009a0
Depends: osmo-python-tests I896b99032d94ba0cdd340a8eed7c7b625661ad69
Closes: OS4651
This option has been deprecated back in 2018 [1], but for some
reason we still have it in the configuration examples, so it
prevents osmo-bsc to allocate TCH/F on dynamic timeslots.
[1] Ib2335d02ea545aff837aadd49f15b2fdb418c46e
Change-Id: Icc82f6178d18dccc7207485b25dc3bdad91a0052
Related: SYS#5014
Move 'doc' subdir further down to "make sure" the osmo-bsc binary is built
before the docs.
Remove bsc_vty_reference.xml from the source tree.
In manuals/Makefile.am use the new BUILT_REFERENCE_XML feature recently added
to osmo-gsm-manuals, and add a build target to generate the XML using the new
osmo-bsc --vty-ref-xml cmdline switch.
Depends: I613d692328050a036d05b49a436ab495fc2087ba (osmo-gsm-manuals)
Change-Id: I5dc872149154e1a949bb6a2b9bbc1461e0fc51f6
The BSC is the wrong network component to originate USSD messaging, as can be
seen in the hacks in the USSD code: for example, the BSC would send a CM
Service Accept message as if an MSC had accepted the connection, dispatch a
USSD and directly send some RR release message (without proper tear down
messaging like the lchan_fsm does these days). This made sense in the osmo-nitb
world, but by now we are aiming for solid 3GPP compliance. The BSC shall not
originate USSD messages.
Deprecate all VTY and CTRL commands related to USSD:
VTY
[no] bsc-welcome-text
[no] bsc-msc-lost-text
[no] bsc-grace-text
[no] missing-msc-text
(the commands with 'no' are ignored, without 'no' lead to an error)
CTRL
ussd-notify-v1
Drop (already unused) ussd.h.
Drop gsm_04_80.h, gsm_04_80_utils.c, and all calling code.
Drop "RF grace" notification, where osmo-bsc was able to notify active
subscribers that the RF was being turned off.
Change-Id: Iaef6f2e01b4dbf2bff0a0bb50d6851f50ae79f6a
The bsc_msc_data->rtp_base has been unused ever since we introduced the exernal
MGW in osmo-bsc [1]. The vty command also still exists. Deprecate the vty
command, remove the member.
[1] "mgcp: use osmo-mgw to switch RTP streams"
commit 39c609b7c9
Change-Id Ia2882b7ca31a3219c676986e85045fa08a425d7a
Change-Id: Id14fa3066ca5d472a817593074a6222f159168a8
I notice that some merges seem to have missed updating the
bsc_vty_reference.xml file. Re-generating it from current master yields these
changes.
Change-Id: I75269cbed8dd62be23293fd2c1470af6f61e6ad2
According to 3GPP TS 44.060, section 12.24, GPRS Cell Options IE
contains two parameters related to 11 bit Access Burst support:
- ACCESS_BURST_TYPE - whether the 8 or 11 bit format shall be
used in the PACKET CHANNEL REQUEST message, the PTCCH/U block,
PACKET CONTROL ACKNOWLEDGMENT and the PS HANDOVER ACCESS
messages on the PRACH (if present).
- EGPRS_PACKET_CHANNEL_REQUEST - whether EGPRS capable MSs shall
use EGPRS PACKET CHANNEL REQUEST message for Uplink TBF
establishment on the RACH or on the PRACH (if present).
The VTY option 'gprs 11bit_rach_support_for_egprs' actually controls
the second parameter - EGPRS_PACKET_CHANNEL_REQUEST, though it may
be hard to understand this from its name and description.
This patch is actually a group of tightly related changes:
- deprecate 'gprs 11bit_rach_support_for_egprs (0|1)':
- update its description to avoid any possible confusion,
- print a warning if it's used in non-EGPRS mode,
- print a warning if it's still used;
- introduce '[no] gprs egprs-packet-channel-request':
- ensure that it can only set / printed in the EGPRS mode;
- take a chance to clean-up / rename the related struct members:
- 'supports_egprs_11bit_rach' -> bool 'egprs_pkt_chan_request',
- remove 'supports_egprs_11bit_rach' from 'gprs_cell_options'
because we already have 'ext_info.use_egprs_p_ch_req' there.
Change-Id: Ied5bd10a806aeeac65ef32339d4ab0e3700e5da9
Link to the osmo-gsm-manuals/common/cs7-config.adoc chapter to fully explain
the 'cs7' client configuration.
Related: OS#2767
Depends: Ia2508d4c7b0fef9cdc57e7e122799a480e340bf7 (osmo-gsm-manuals)
Change-Id: I5b4973901f02046322b852fd9862517982d21bd9
All timeslots are configured for full rate, so the codec list must also
have a full rate codec. Fix this error on startup:
"Configuration contains mutually exclusive codec settings -- check configuration!"
All other example configs don't have mutually exclusive codec settings.
Related: OS#3739
Change-Id: Iddac13c7d644ed57b6d9e6a57d23d88c01bd8b8e
Replace python 2 code using pychart to draw a graph in
osmux-reference.adoc with the generated svg file. The upstream of
pychart is dead, there is no python 3 version, and python 2 is EOL at
the end of 2019.
This is the only time we ever made use of pychart in osmo-gsm-manuals,
so with this change, we can just drop the dependency.
I've generated the chart by saving the python code in chart.py, then:
$ ./chart.py --format=svg --font-size=3 > chart.svg
Related: OS#2819, OS#4193
Depends: osmo-ci I754b133d77743582bd84c33c74ecc9eb9ca4c0ef
Change-Id: I36b721f895caee9766528e14d854b6aa2a2fac85
SCCPlite is long supported (again) by osmo-bsc, let's remove the
outdated pointers to osmo-bsc-sccplite.
Change-Id: Ia3d831aca7c3c7ef9f257e974faf6e8e360c59f5
This adds code to handle CBSP (Cell Broadcast Service Protocol)
from the CBC (Cell Broadcast Centre), as well as BSC-internal data
structures for scheduling the various SMSCB on the CBCH of each BTS.
There are currently one known shortcoming in the code: We don't yet
verify if keepalives are received within repetition period.
Change-Id: Ia0a0de862a104d0f447a5d6e56c7c83981b825c7
Run it like this:
COMMIT=master DOCKER_PLAYGROUND=~/scm/osmo/docker-playground OSMO_INTERACT_VTY=~/scm/osmo/osmo-python-tests/scripts/osmo_interact_vty.py ./regen_doc.sh
COMMIT will default to current HEAD.
Change-Id: Iedd1f55d021231d86c19b6f14ff296e3a55148c8
Related: OS#1700
Having different names for the same config setting is misleading, so
let's stick to the one used by osmo-bts.
Change-Id: Ide5ceb5db7403a70313405752579e30d7bb94eac
We meanwhile have chapters about the CTRL interface protocol as well
as the auto-generated list of CTRL interface commands/values, so
let's remove the somewhat redundant information.
Change-Id: I062d7eec3b3fc53c31726be3b3a407a2dd3b8b56
We still haven't re-introduced support for E1 based BTSs, so let's
remove the relevant chapters from the manuals. Also, make sure
we don't call anything OsmoNITB in this manual anymore.
Change-Id: I834d65836731958b6be823a18e35407183398715
It makes a lot of sense to first describe the VTY interface before
going on using it to configure something. Also, configuration related
topics relevant to operators/sysadmins should precede other content
only relevant to developers, like the details of the CTRL or Abis/IP
protocol.
Change-Id: I0872d072bbb06f9409a72b93133d136167f03b38
This adds some instructions on how to configure 3G/4G neighbor
cells within osmo-bsc. I didn't want to add a new top-level
chapter but instead chose to add it to the handover section which
describes also the configuration of 2G neighbors.
Change-Id: I81df1a453858b6fca80c8adf234b1d5b8bf5283d
In GSM specs, the entire interface between two elements is designated
with some letter, like the A interface between BSC and MSC. The
interface uses a variety of protocols stacked on each other.
In the specific case of A, there is no "A" on top of SCCP, but
there's "BSSAP" on top of SCCP.
This is followed somewhat un-orthodox by 3GPP, as "A over IP" is
a violation of that principle. It should have been called "A utilizing
IP", "A based on IP", "A with IP" or something the like.
In any case, at no point do the specs ever claim that "A" is stacked
on top of SCCP, so let's fix this.
Change-Id: Ieb0d8f6c71debe1234aff343a994c2096326da1b
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in local the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I92c0f771d4ffc2b0401d26e25cb0b3817e6f95ea
Includes from other projects don't work anymore when moving project
specific manuals into other repositories.
Related: OS#3385
Change-Id: I96933dd4dd6cac159847647f1c642215051a9aad
Re-generate bsc_vty_reference.xml from osmo-bsc, including updates to:
- handover and neighbor config
- SCCP timers
- logging
Change-Id: Ia9ba8d5eba531b1156de57573ab42517e0c1ca15
Pau Espin
Harald Welte
Vadim Yanitskiy
Neels Hofmeyr
Oliver Smith
Martin Hauke
Daniel Willmann
Eric Wild