Expose OML link uptime available via vts's "sh bts 0" command with the
new "bts.0.oml-uptime" ctrl command. To avoid code duplication, move
uptime computation into separate function and use it for both.
Change-Id: Iec405aa949d6a38a9c8e64cd7ee4b49fd416835d
Related: OS#2486
OML link state is available via vty ("sh bts 0" command) and
ctrl ("oml-connection-state" RO variable).
When showing OML link state, take into consideration RSL link state as
well: if OML is up but RSL is missing show it as degraded.
That's implemented via BTS model-specific functions (currently Sysmo- and
Nano- BTS only)
Change-Id: I5952fc59e4d82e0aa627ad91d20f964d9559a4c4
Related: OS#2486
This is a BSC, it has norelation to RANAP or Iu(h). Let's remove
an references to it, and also the build dependency to libosmo-ranap-dev
Change-Id: I517b9f69309b2ed0540dd6c186b3d4a2a03aed44
Save the time when OML link to BTS was established and show it in
vty. That's useful when troubleshooting issues like periodic/sporadic
BTS restart.
Related: SYS#3889
Change-Id: I9e4e8504afe8ca467b68d41826f61654e24d9600
Previously we've used function so debug print always pointed to the same
place which is not very useful. Wrap it with macro so proper
file:line is printed. Also, make sure that we always change state only
through this wrapper and log only when the state has changed.
Change-Id: I21789f8021290965b61a54a2b23177ccbbfe8321
According to 3GPP TS 44.018 §1.8 the "network shall never enable PBCCH
and PCCCH".
Change-Id: I319e71a4b0c682361529e9c21377398a826b934b
Related: OS#2400
* log administrative state transitions
* log what's caused it
* while at it, mark boolean variable as such
Change-Id: I3e25a19fac4d0b4886d825c9876771b1f66efe58
Related: SYS#3864
After osmo-mgw change I8e0b2d2a399b77086a36606f5e427271c6242df1, there now is a
separated libosmo-mgcp-client, and osmo-bsc needs adjusting.
But besides having an unused struct in gsm_network, osmo-bsc does not yet use
its MGCP client; these are merely plans for the future. Until we do, let's just
drop the dependency entirely.
Change-Id: I6402c7cbe58dacae7630f7f03819f8102e54c699
These either remain from openbsc.git or slipped in while applying recent
patches from openbsc.git and do not belong in osmo-bsc.
Empty out contrib: remove things that are either obviously unrelated to
osmo-bsc, or seem old and/or esoteric.
osmoappdesc.py: drop nitb_e1_configs (and some ws)
Change-Id: Ib20064f35e623d99c7d59496a3156e84b8a0d07a
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Set the time on the status report to the time the message was delivered, as
this may not be the same as the time when we are delivering the report to the
originating MS.
Change-Id: I9056429d40bf02731f004b7833f1de45a0d1add8
In 2015, Jacob moved/copied related functions to libosmocore, but
for some reason didn't remove the copies here. Let's follow-up on
that and remove duplicated code.
The libosmocore commit introducing osmo_apn_to_str() was
8114294bf29ac6e44822c0ae43d4b0819f11b022
Change-Id: I7315ffcbed8a54cca2056f313bb7783ad82d0ee9
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
If the mobile phone requests a status report via SMS, send a DELIVER_SM
with esm_class = Delivery Receipt to ESME to indicate that the SMS has
been already delivered to its destination.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-DELIVER | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | DELIVER-SM |
| | esm_class = Delivery Receipt |
| |------------------------------->|
| | DELIVER-SM-RESP |
| |<-------------------------------|
| | |
This patch implements "Appendix B. Delivery Receipt Format" as specified
in the SMPP 3.4 specs. This string is conveyed in the SMS message as
data, and it is only meaningful to the ESME, for logging purposes. The
"submit date" and "done date" are not yet set, and other fields are just
sent with dummy values, so they are left to be finished as future work.
The new SMPP TLV tag TLVID_user_message_reference is added to the SMPP
messages inconditionally now since this information is required by
delivery-reports to associate the status-report with the original SMS.
Change-Id: Ic1a9023074bfa938099377980b6aff9b262fab2a
A number of the GSM timers (including T3109) had no reasonable
default values if not specified in the VTY / config file. Together
with unconditional writing to the config file, this created
config files with a persistent setting for important timers as '0'.
To make things worse, many of our example cofig files suffered from the
same problem.
Let's avoid this from happening by
* having reasonable defaults if nothing specified in the config file
* conditionally savingg timers only if they differ from default
* reject any timer values that state zero during start-up (see previous
commit)
Change-Id: Iaac0bfca423852b61d8b9eb1438157ef00d0d8c8
Closes: OS#2380
For some GGSNs we need to insert the PDP Charging Characteristics
that were returned. We receive these values from GSUP and will
fill them into the tlv structure when finding the ggsn context.
Change-Id: I1725bfd2403d29ce3550bfcd6fcc1498426ef906
The ip.access nano3G needs the first RTP payload's first two bytes to read hex
'e400', or it will reject the RAB assignment. Add flag
patched_first_rtp_payload to mgcp_rtp_state to detect the first RTP payload on
a stream, and overwrite its first bytes with e400. This should probably be
configurable, but seems to not harm other femto cells (as long as we patch only
the first RTP payload in each stream). Only do this when sending to the BTS
side.
Related: OS#2459
Change-Id: I5eff04dcb0936e21690e427ae5e49228cd459bd4
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
In an upcoming commit, sgsn_vty_init() will require access to the global sgsn
config struct to initialize a generic VTY command with the proper config
destination address, see Change-Id I5b5b6a9678b458affa86800afb1ec726e66eed88.
Change-Id: Ie6b6e5422987586531a898e0c5b867623dbecb0f
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
Related: OS#1592
Change-Id: Ie303c98f8c18e40c87c1b68474b35de332033622
Before, each GSUP client would contact the HLR with an identical unit id, i.e.
"SGSN-00-00-00-00-00-00", with the result that some messages were sucked off by
the wrong client.
Pass explicit unit name from each gsup client user, so that OsmoMSC is "MSC"
and OsmoSGSN is "SGSN". Hence the HLR can properly route the messages.
Todo: also set some values instead of the zeros.
Unrelated cosmetic change while editing the arguments: gsup_client_create()'s
definition's oap client config arg name mismatched the one used in the
declaration. Use oapc_config in both.
Change-Id: I0a60681ab4a4d73e26fe8f0637447db4b6fe6eb2
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Add the hooks/configure detection to compile everything with
-fvisibility=hidden and then make certain symbols visible. This
will be used to make parts of the API public.
There are no users yet but we should have some soon.
The abnormal case is that lchan_free ist getting called due
a RSL_MT_CHAN_REL_ACK in the RSL but the refcount of this
channel is not zero. This means that some "logical operation"
is still going on that needs to be cancelled.
Instead of always queuing up all operations in the
struct gsm_lchan use the signal framework to inform higher
layers about this abnormal case.
In gsm_04_08.c a signal handler is installed and in the
abnormal case the location updating request operation is
freed.
This was a stupid decision. We will have to assign the
network at some other place. The problem will be a problem
when we have two gsm_networks in one process and the same
subscriber is traveling in both networks.
The pointer was initially added to support to open a lchan
by using the gsm_subscriber structure. We would have restored
the struct gsm_bts from the db when loading the subscriber.
Instead we will dynamically resolve the gsm_bts and might end
up paging multiple bts in the same (stored/old) location area
until it answers.
* add nm_state objects for RACK and CCLK
* add obj_class human-readable printing for all vendor obj_classes
* add human-readable printing of administrative state
* add enum for cell_alloc numbers
A new function trau_recv_lchan() is used to link a channel to a call reference
of a transaction. (Transactions are used in later patches.) TRAU frames will
then be forwarded to the application with the given call reference (in later
patches). Also the application can send TRAU frames by using trau_send_lchan().
A new list is introduced in trau_mux.c. (upqueue_entry) All subslots
that must be sent to application are listed here.
Received TRAU frames are written in the upqueue of application
interface, if a call reference is found in the upqueue-list. If an entry
is found the ss_entry list, the TRAU frames are bridged as before. The
frames have a message type (msg_type), a call reference (callref) and a
trau frame (data). The length of trau frame is defined by the content of
the c-bits inside the frame.
There is no support for ip.access yet, as they don't use the traditional
TRAU frame format. Harald must add this in order to use application interface
with ip-access. The bridging with ip-access works as before.
(Andreas Eversberg)
Max
Harald Welte
Neels Hofmeyr
Philipp Maier
Keith Whyte
Pau Espin