follow-up to
0256c89187
Icac06ed554fd61bf7c4bfb1d5c3739a01f2915a4
Previous patch increased the range, but let's also allow one more
argument so that the A5 mask can be fully enabled.
Change-Id: Ie8cd753e4425d7d51397e4dddc24108fa0392de4
we recently added control commands to apply vty config files during
runtime using the control interface. However, there is no command that
allows us to store the config file modifications.
Change-Id: If17095bb86f82dd8feb86eb72c4133ea3aa1c3b3
Related: SYS#5369
msg->data_len is the total number of bytes available in the buffer,
not the actual length of the payload. Use msgb_length().
Change-Id: I35bf0827ff14e84a755c1aa24a6efc06bc7b9f9b
inter-BSC into this BSC: from BSSMAP Handover Request, parse and store
Kc128. All else is already implemented: depending on the chosen
encryption algorithm, Kc128 will end up in the Channel Activation.
inter-BSC out of this BSC: nothing is needed to support A5/4, the BSSMAP
Handover Required message does not contain any encryption related
information. The MSC already knows the chosen algorithm.
Related: SYS#5324
Change-Id: I7e9590e8c96aa50086148863ad9a2741b978e614
Receive and store the Kc128 key from MSC, and use as key sent to BTS if
A5/4 is the chosen encryption algorithm.
(A5/4 in handover will follow in a separate patch)
Related: SYS#5324
Change-Id: I7c458c8a7350f34ff79531b3c891e1b367614469
Add A5/4 to the internal mask of allowed algorithms.
(Not actually working yet, A5/4 implementation follows in other
patches.)
Related: SYS#5324
Change-Id: Icac06ed554fd61bf7c4bfb1d5c3739a01f2915a4
An upcoming patch for A5/4 would need to add a kc128 arg and reject
cause rc to gsm0808_cipher_mode(). Instead prepare for less cruft by
just having a single function.
Related: SYS#5324
Change-Id: I7f7c635943990a251ae28ae7a0d69cc3a239a154
In build_encr_info(), validate the algorithm and key presence and return
negative if errors are encountered.
At all callers, handle the error case.
An upcoming patch will add handling of Kc128 for A5/4 encryption and
also wants to return error codes. This is a preparation for that patch:
I7c458c8a7350f34ff79531b3c891e1b367614469
Notice that osmo-bsc does send the key along even if A5/0 is chosen,
this patch keeps that behavior unchanged.
Related: SYS#5324
Change-Id: I125d8aabceddd5b34cb98978cee9b6d2fc8fd0f2
'vamos' is only set to true for osmobts types, hence no need to check
that condition again.
fixup for commit d37dcb9f68
'RSL: rx and tx VAMOS Channel Number cbits for VAMOS lchans'
I957eff0d2c33ec795eda75a4bff21965b0179f73
Related: CID#236318
Related: SYS#5315 OS#4940
Change-Id: I4d9afc2996d95fdc15ee1a04e31d781b595023e3
The AFS bias actually should not apply to local cell lchans, because it
makes no sense for intra-cell considerations:
- same-cell lchans obviously have identical rxlev;
- any nonzero AFS bias thus always raises the TCH/F above the TCH/H;
- for intra-cell reassignment, the power budget hysteresis is,
naturally, not applied.
So, before this patch, setting AFS bias even to only 1 would
unconditionally move all (AMR) TCH/H lchans over to free TCH/F lchans in
the same cell.
Recent patch Id40d1cf8b58410c7d4eb87407fe8b8106e352438 implements
explicit upgrade from TCH/H to TCH/F *if* the TCH/H is experiencing low
rxqual or low rxlev, as a proper replacement for intra-cell AFS bias.
Related: SYS#5198 SYS#5365
Change-Id: I315f24123ae016887ab91666870ce252e096f90f
Make sure that the target lchan has been initialized before attempting
to reassign.
I ran into this in the VAMOS tests, forgetting to set the BTS_FEAT_VAMOS
in osmo-bts-omldummy: the vty command from ttcn attempts to reassign to
a non-initialized lchan, and aborts osmo-bsc.
Change-Id: Ia77a3312dde0e4b8df9ad2f33339266bae06439d
The RSL_CHAN_OSMO_VAMOS_MASK mask applies to the chan_nr,
but the cbits variable in rsl_lchan_lookup() is chan_nr >> 3.
So the mask didn't do its job. Now it does.
A bit embarrassing how i took the suggestion to use this mask and put it
into code without testing it. It looked good enough...
Change-Id: I005c5f319bb6f14651aeb613cdff52e79f761913
Pass flag into find_alternative_lchan() indicating that a TCH/H channel
has low ratings (rxqual or rxlev, doesn't matter).
Heed this flag in the last round, the requirement A check, and allow
candidates that have equal rxlev, if they result in an upgrade from
TCH/H to TCH/F. This allows intra-cell upgrades to TCH/F.
An important point is that this patch allows upgrade to TCH/F *without*
the AFS bias setting. See also I315f24123ae016887ab91666870ce252e096f90f.
Related: SYS#5198 SYS#5365
Change-Id: Id40d1cf8b58410c7d4eb87407fe8b8106e352438
Drop terminating newline from an assignment_fail() call which causes an
erratic line feed in logging.
Change-Id: Ib56e1f6a45c7e2c235f8ef0c8dea7151481677ab
Add VTY command to trigger an intra-cell re-assignment, also allowing to
re-assign to a secondary VAMOS lchan.
Related: SYS#5315 OS#4940
Change-Id: If006f5caaf83b07675f57e5665cfa79328da55e6
Add the Osmocom-specific extension to indicate VAMOS shadow lchans in
RSL, in lchan lookup and RSL message transmission.
Note that RR messages containing cbits (Assignment Command, Handover
Command, ...) must *not* send Osmocom specific cbits to the MS. Only the
RSL messages directed to the BTS send Osmocom specific bits.
Related: SYS#5315 OS#4940
Depends: If33c1695922d110c0d2c60d5c0136caf2587194e (libosmocore)
Change-Id: I957eff0d2c33ec795eda75a4bff21965b0179f73
It's bad to abort the program for an incompatible chan_nr. Instead of
OSMO_ASSERT(), make sure that error handling happens all they way to the
original callers of gsm_lchan2chan_nr etc.
This is also preparation to add further error causes: Osmocom specific
cbits needed for a non-Osmo BTS.
Related: SYS#5315 OS#4940
Change-Id: I71ed6437c403a3f9336e17a94b4948fca295d853
There is some odd repetition of macros with all possible subslot
indexes, but now we are using the defined macros instead of magic
numbers, making it easier to see that it is correct.
Also this allows trivially adding VAMOS cbits cases to the existing
switch() in a subsequent patch.
Change-Id: I4c6ce2f4ca999c19a58909b9adb849a3b8b6ffc8
Change gsm_lchan_name_compute() to a function that in-place updates the
lchan->name. That allows calling it numerous times with the talloc
handled internally. Rename it to lchan_update_name().
Add 'shadow' to lchan_update_name() and lchan_fsm_update_id() for VAMOS
shadow lchans, and also print the lchan index that it is a shadow for,
instead of the index in the lchan array.
When set_pchan_is() updates the VAMOSness of the lchans, call
lchan_fsm_update_id(). From lchan_fsm_update_id() also call
lchan_update_name().
This is a bit convoluted for legacy reasons. There are utility programs
and C tests using bts_trx.c but not lchan_fsm.c. lchan_update_name()
lives in gsm_data.c for that reason. This patch calls
lchan_update_name() from lchan_fsm_update_id() and not vice versa to
avoid having to add stubbed lchan_fsm_update_id() functions to all
utility programs and C tests.
We can't easily unify the lchan->name and lchan->fi->id without lots of
refactoring rippling through all those little utility programs and C
tests.
Change-Id: I7c2bae3b895a91f1b99b4147ecc0e3009cb7439a
So far there is a bunch of code setting a primary lchan in VAMOS mode.
This patch now adds the actual secondary "shadow" lchans that may be
combined with a primary lchan in VAMOS mode to form a multiplex.
VAMOS lchans are put in the same ts->lchan[] array that keeps the
primary lchans. They are at most two additional usable lchans (for a
TCH/H shadow) added to either TCH/F or TCH/H.
Keeping these in the same array allows looping over all lchans easily.
The ts->max_primary_lchans indicates the index of the first VAMOS shadow
lchan.
Related: SYS#5315 OS#4940
Change-Id: I928af99498bba488d317693f3144d4fccbbe9af3
We already send the TSC Set in the RSL Channel Activation, telling the
BTS about the TSC Set. The MS needs to be instructed of the TSC Set in
the RR Assignment Command.
The first code to actually do an Assignment to a VAMOS activated lchan
will follow in If006f5caaf83b07675f57e5665cfa79328da55e6.
Change-Id: Ibf3b6d276fadf724c16a5225c03e96a27a056153
Add function lchan_activate_set_ch_mode_rate_and_mr_config() and call it
for both plain channel activation and after a mode modify that needs RTP
activation. The AMR config was missing after Mode Modify.
Related: SYS#5315 OS#4940
Change-Id: I842fe7a14a91d1ec123cb4a3f52afe34456c03e3
lchan->activate.info.ch_mode_rate should remain unchanged, it is the
immutable request data. However, for VAMOS, we will want to
automatically see that the chan_mode is chosen correctly.
As a first step, place a mutable ch_mode_rate copy at
lchan->activate.ch_mode_rate, i.e. not in .activate.info, but in
.activate. Use that everywhere.
This is mostly a non-functional change, preparing for a subsequent patch
that adds handling of VAMOS shadow lchans.
As side effect of adding lchan_activate_set_ch_mode_rate_and_mr_config()
after MODE_MODIF_ACK (enabling the voice stream after a channel mode
modify), fix AMR config: the call to lchan_mr_config() was missing.
Change-Id: Icc9cc7481b3984fdca34eef49ea91ad3388c06fe
A subsequent patch will add to this VTY command, so let's first test the
current status as a baseline.
Change-Id: I6379e306fb8fa6ec227125c6cf14893d674e7596
VAMOS shadow lchans do not exist yet, but add the indicator flag that
tells whether an lchan pointer is a primary or a shadow lchan.
In Mode Modify: based on the flag, choose a different default TSC Set
for shadow lchans; do BTS type compat checking for shadow lchan use.
Actual lchans with vamos.is_secondary == true will be introduced by
patch: 'add VAMOS secondary lchans to timeslot struct'
I928af99498bba488d317693f3144d4fccbbe9af3
Change-Id: I4072fc7703c592df699fe8e27c02df09acde0909
Neels Hofmeyr
Vadim Yanitskiy
Pau Espin
Philipp Maier
Eric Wild