This was so far workarounded in tests by manually freeing the fields.
However, in follow-up patch the paging queue will also be properly
freed, so free of the counters needs to be previously fixed too so that
counters are freed at the right point of time.
Otherwise, during paging queue flush, counters are used and would crash
because they were freed before the BTS object in each test's bts_del().
Change-Id: Id213e21cf9bfc5439021e459c22ba4704d8cae2b
This commit demonstrates what happens when a cell has channels in
both P-GSM and E-GSM bands (case 'c'). As can be seen from:
Case a) only the BCCH carrier: 10
Case b) more carriers from P-GSM band: 1 3 10 64 99 124
Case c) more carriers from E-GSM band: 1 3 10 64 99 124
in both cases 'b' and 'c' we have the same set of ARFCNs. Carriers
from the E-GSM band are not present at all. This is wrong and will
be fixed in the follow up change(s).
Change-Id: Ied0519c70501f105673a9b36657101063d275058
Related: SYS#5854
These are not needed anymore since we re-introduced libbsc, specially to
avoid all this churn.
Some specific methods are explicitly required to be overwritten by
tests, so we specificially mark those with __attribute__((weak)) in
order to be able to overwrite them.
This is the last step towards fixing interdependency mess of symbols and
stubs, and requires previous patches in order to have tests apssing
fine.
Change-Id: Ic7401b8a6eb903882e30fda1cf091ac99a254ef0
This is used inside group of files forming libbsc (shared files used by
several apps). Let's instantie only once inside a file from libbsc
instead of doing so on each binary.
This is one further step towards fixing interdependency mess of symbols
and stubs.
Change-Id: I9b287aa492ca6aae5fc56133e1510aff3146fe25
This code is available in libosmocore since ~3 years ago
(fdf8b7b1beeb0cda262c5fb060a933aa7edb5e9a). Let's use it instead of
maintaining duplicated code which diverges over time.
Depends: osmo-bsc.git Iae058c35506bc25c9f4790889b89ac46aea664b6
(contains cherry-pick of bug fixed in osmo-bsc.git).
Change-Id: I53ad3067623077b6a8737c2a0aecc8b46bf71a15
Prepare for VAMOS, where there will be secondary "shadow" lchans serving
secondary MS on the same timeslots. For those, RSL messages will need to
reflect a different stream ID aka TEI, via an rsl_link_vamos.
Make sure that every code path that sends an RSL message for a specific
lchan selects the RSL link via the new function rsl_chan_link(). When
VAMOS is implemented, this function can select the proper RSL stream.
Rename gsm_bts_trx.rsl_link to rsl_link_primary. This makes sure I'm not
missing any uses of the RSL link, and clarifies the code.
Related: SYS#5315 OS#4940
Change-Id: Ifbf16bb296e91f151d19e15e39f5c953ad77ff17
Firstly, do not store the encoded AMR length-value bits in gsm_lchan->*
before an activation/modify has actually succeeded.
And secondly, do not store the AMR LV structure in struct gsm_lchan at
all, but only generate the TLV exactly when a message is being composed.
In gsm48_multirate_config(), generate the LV directly to a msgb instead
of a static buffer first. gsm0408_test.c expected output verifies that
the generated LV bytes remain unchanged.
In lchan_mr_config(), introduce a target mr_conf argument, so that Chan
Act and Mode Modify may generate the filtered AMR config to different
locations (lchan->{activate,modify}.mr_conf_filtered).
Only after receiving an ACK for Activate/Modify, set
lchan->current_mr_conf from lchan->{activate,modify}.mr_conf_filtered.
Use the properly scoped lchan->activate.mr_conf_filtered for Chan Act,
lchan->modify.mr_conf_filtered for Mode Modify and
new_lchan->current_mr_conf for Handover Command as appropriate.
Related: SYS#5315 OS#4940 OS#3787 OS#3833
Change-Id: Ie57f9d0e3912632903d9740291225bfd1634ed47
In osmo-bsc, gsm48_multirate_config() is used in a way where the struct
amr_mode *modes always points at the full set of configured modes, and
only the AMR bits m4_75 thru m12_2 are unset to filter the used modes.
In the current test, the bits are unset to filter, but also the struct
amr_mode *modes is reduced accordingly. Instead, keep the modes fully
populated and unset only bits, like osmo-bsc does in practice.
The test results should not (and do not) differ.
Change-Id: I545de6fb66a4b74a3f08899795b4b4d9c4538f58
It's acceptable to verify an outcome by printing to an expected output.
It's unacceptable to commit those expected outputs without first
verifying that they are in fact correct!
In this case, the output has obviously not been even read, since the
length byte clearly indicates that one byte is missing from each buffer
dump.
I have now verified by hand against 3GPP TS 44.018 that each one of the
generated octets are indeed correct.
Change-Id: I92fcc7afe018a4a8dc91f0f2167e3a7835f623c9
The neighbor configuration storage is fundamentally broken: it requires
all local cells to be configured before being able to list them as
neighbors of each other. Upon config write-back, the neighbor config
however is placed back inline with the other config, and hence a
written-out neighbor config no longer works on program restart.
The cause of this problem is that the config is stored as explicit
pointers between local cells (struct gsm_bts), which of course requires
the pointer to exist before being able to reference it.
Instead, store the actual configuration that the user entered as-is,
without pointers or references to objects that need to be ready. Resolve
the neighbors every time a neighbor is needed.
Hence the user may enter any config at any place in the config file,
even non-working config (like a BTS number that doesn't exist), and the
relation to actual local or remote neighbor cells is made at runtime.
Abort program startup if the initial neighbor configuration contains
errors.
Related: OS#5018
Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
The only real 1-1 relationship between BTS NM objects is the one between
GPRS Cell and BTS (which is actually a BTS cell).
In our current osmo-bts implementation we don't care much since we only
handle 1-cell BTSses, but let's make the data structure organization
more generic.
Implementation notes:
The gsm_bts_sm is moved to its own file, APIs to allocate are added and
the new public object is hooked correctly in the allocation process of
osmo-bsc.
Change-Id: I06461b7784fa2a78de37383406e35beae85fbad8
Move conn allocation to bsc_compl_l3(), from gsm0408_rcvmsg().
Drop dispatch of GSCON_EV_A_DISC_IND, because a) we did not receive such
DISC.IND, and b) the lchan release will discard the conn in the regular
fashion.
In upcoming LCS patch, bsc_compl_l3() will decide whether to allocate a new
conn or whether a conn from a Perform Location Request already exists for the
subscriber.
In this patch, it becomes clear that the conn->bsub is always NULL in
bsc_compl_l3(), and that the 'log_set_context(LOG_CTX_BSC_SUBSCR, conn->bsub);'
never has the intended effect. An upcoming patch will change that.
Change-Id: I92af0f0d54c4282d782f2b29d524a64006c3b674
See updated documentation section in manuals/chapters/bts.adoc regarding
an explanation on how the system works.
Related: SYS#4911
Change-Id: I952c9eeae02809c7184078c655574ec817902e06
Place all code related to the object into the related file.
Having all the data model in one file made sense in early stage of
development to make progress quickly, but nowadays it hurts more than
helps, due to constantly growing size and more and more bits being
added to the model, gaining in complexity.
Currently, having lots of different objects mixed up in gsm_data.h is a hole
of despair, where nobody can make any sense were to properly put new stuff
in, ending up with functions related to same object in different files
or with wrong prefixes, declarations of non-existing functions, etc.
because people cannot make up their mind on strict relation to objects
in the data model.
Splitting them in files really helps finding code operating on a
specific object and helping with logically splitting in the future.
Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
Testing these functions is actually done in libosmocore. Also, with new
osmo_mobile_identity API, the functions being tested are marked deprecated. So
drop the test.
BTW, the test contained an IMSI of 16 digits, which is too long, yet was
expected to succeed. GSM23003_IMSI_MAX_DIGITS == 15. I first considered fixing
the test data, but the test is in the wrong place here anyway.
Change-Id: I902d31ecd72d71892fad7945f695a9f1fb403bf2
Lots of times, the MS power class is unknown until after the first
channel has been activated, at which point the MS power class is
received in messages such as LU update or CM Service Requet.
Since the MS Power level is sent upon CHAN ACT, the only way to
communicate the change of maximum MS Power (based on MS power class)
after CHAN ACT is to send a MS Power Control msg. Let's do that.
Related: OS#4244
Change-Id: I3d6b75578e5cb9b2ad474a0ad01362d846ebe135
If an lchan is being released and had a SACCH active, there is no reason to
omit the Deact SACCH message ever. All of the callers that passed
do_deact_sacch = false did so for no good reason.
Drop the do_deact_sacch flag everywhere and, when the lchan type matches and
SAPI[0] is still active, simply always send a Deact SACCH message.
The do_deact_sacch flag was carried over from legacy code, by me, mainly
because I never really understood why it was there. I do hope I'm correct now,
asserting that having this flag makes no sense.
Change-Id: Id3301df059582da2377ef82feae554e94fa42035
After commit [1], the code makes sure to disassociate lchan and conn before
invoking the lchan release. However, we only send RR Release if a conn is
present, which clearly is nonsense after [1].
[1] commit 8b818a01b0
"subscr conn: properly forget lchan before release"
Change-Id: I4fd582b41ba4599af704d670af83651d2450b1db
Manage sending of RR Release via a flag, set during invoking lchan release.
Add do_rr_release arg to lchan_release(), gscon_release_lchans(). In
lchan_fsm.c, send RR Release only if do_rr_release was passed true; do not care
whether a conn is still associated (because it won't ever be since [1]).
That way we can intelligently decide what release process makes sense (whether
the lchan terminates the subscriber connection or whether the connection goes
on at another lchan), and still disassociate lchan and conn early.
BTW, this problem wasn't caught by the stock OsmoBSC TTCN3 tests, because the
f_expect_chan_rel() don't care whether an RR Release happens or not. This is
being fixed by Ibc64058f1e214bea585f4e8dcb66f3df8ead3845.
So far this patch should fix BSC_Tests_LCLS.TC_lcls_connect_clear.
Related: OS#3413
Change-Id: I666b3b4f45706d898d664d380bd0fd2b018be358
The function gsm48_multirate_config() generates the multirate
configuration IE, that is sent via RSL to configure the active set of
AMR codecs inside the BTS. The function already works, but it does not
check the input data for consistancy. Lets add some consistancy check to
make sure that inconsistant parameters are rejected. Also allow the
output pointer to be NULL, so that the function can be used to perform
a dry run to be able to verify parameters.
- Check for invalid / inconsistant configuration parameters
- Perform a dry-run when lv pointer is set to NULL
Change-Id: I06beb7dd7236c81c3a91af4d09c31891f4b910a4
Related: OS#3529
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
Fix various sanitizer complaints about memory leaks using a sanitizer build
with gcc (Debian 7.3.0-12) 7.3.0.
Also fix deprecation warnings on osmo_init_logging().
Depends: I216837780e9405fdaec8059c63d10699c695b360 (libosmocore)
Change-Id: I970c6f8a0e36a8b63e42349dbc92baff649e5cef
Add missing deletion of osmo_stat_item_group_free(bts->bts_statg).
Add missing bts free after test_si_ba_ind().
Log deallocation, update expected test output.
This fixes some of the errors of gsm0408_test's SI tests, as revealed by a
sanitizer build using gcc (Debian 7.3.0-12) 7.3.0.
Fixes:
=================================================================
==19273==ERROR: AddressSanitizer: heap-use-after-free on address 0x60d0000004b8 at pc 0x7f1561a94621 bp 0x7ffe7a7a64a0 sp 0x7ffe7a7a6498
WRITE of size 8 at 0x60d0000004b8 thread T0
#0 0x7f1561a94620 in __llist_add ../../../src/libosmocore/include/osmocom/core/linuxlist.h:75
#1 0x7f1561a94620 in llist_add ../../../src/libosmocore/include/osmocom/core/linuxlist.h:90
#2 0x7f1561a94620 in osmo_stat_item_group_alloc ../../../src/libosmocore/src/stat_item.c:141
#3 0x5574f6a19935 in gsm_bts_alloc ../../../../src/osmo-bsc/src/libbsc/gsm_data.c:728
#4 0x5574f6a12920 in bts_init ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:123
#5 0x5574f6a0ddb3 in test_si2q_e ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:192
#6 0x5574f6a0ddb3 in main ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:824
#7 0x7f156061aa86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21a86)
#8 0x5574f6a10339 in _start (/n/s/dev/make/osmo-bsc/tests/gsm0408/gsm0408_test+0xfc339)
Change-Id: I1ebbd8cc0622ce1a061e933813829b1f770072dc
The LAI encoding test in gsm0408_test.c uses deprecated API, and a more
thorough test for LAI encoding has been added in libosmocore/test/gsm0408/.
Change-Id: I8a55d717ab15ba23943a2639accaadc33a4f731a
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ic16bc0bab3f2d4721e86a1a04f9d9f988d777df2
Move from using deprecated gsm48_construct_ra(), which uses a buf, to
gsm48_encode_ra(), which uses a gsm48_ra_id argument. Pass struct gsm48_ra_id
around instead of a buf.
struct gsm48_ra_id is the "encoded" representation of the bytes in a typical
MCC-MNC-LAC-RAC (04.08 Routing Area Id IE, 3GPP TS 24.008 § 10.5.5.15). Using
the struct spares using magic numbers for byte offsets.
In the process, fix a sanitizer warning for unaligned access by using memcpy()
instead of pointer assignment:
osmo-bsc/src/libbsc/abis_nm.c:2857:27: runtime error: store to misaligned address 0x7ffe8e0d6695 for type 'uint16_t', which requires 2 byte alignment
Note that (besides removing a now unnecessary cast) the gsm0408_test and
abis_test tests of RAI / CGI encoding remain stable, which indicates that the
new code is still correct.
Change-Id: I0d3908fb8ca1e2e669d257b5d59b40675fa85d06
The separation of gsm_data_shared.* from gsm_data.* historically allowed
compiling parts of it into osmo-bts, which we have dropped since (osmo-bts has
its own copy now). Even though gsm_data.* now becomes rather large by it,
remove the legacy separation to get rid of the "shared" naming, which is no
longer meaningful. A future patch might separate into meaningful smaller bits,
if we get the time.
Change-Id: Ie247bc492efb331871d970c56700595ad3f7e201
Provide concise log categories for each main scope.
Move the complete log categories 1:1 to osmo_bsc_main.c.
In bsc_nat.c, omit obviously unused log categories.
In tests, omit almost all log categories, except for those explicitly tested as
the expected output.
Note: should any logging occur for a log category that is omitted by accident,
such will end up being logged as DLGLOBAL, so it will show up and we can fix
it, and it will not get lost silently.
Change-Id: Ib524e49ec211662e0dfde8161495a72aa8ad76cf
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
Recent change lin libosmocore disallow registering rate_ctr with the
same name and indexing multiple times. To accommodate to this:
* allocate network struct once and use it for all tests
* deregister rate_ctr group after each test
* free bts struct after each test
Related: OS#2757
Change-Id: Ie1537a1ee9ee812eaaf9f58dc4bc86d4add8c31f
This adds a test case to explicitly verify the BA-IND is as expected
by the behaviour introduced in Change-Id I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Related: OS#2525
Change-Id: I3e5b260af97ce96a221e4d51f6c1b41d58817a59
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Harald Welte
Vadim Yanitskiy
Pau Espin
Neels Hofmeyr
Philipp Maier
Neels Hofmeyr