large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
/* osmo-bsc API to manage lchans, logical channels in GSM cells. */
|
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
|
|
#include <osmocom/bsc/gsm_data.h>
|
|
|
|
|
#include <osmocom/bsc/debug.h>
|
|
|
|
|
|
|
|
|
|
/* This macro automatically includes a final \n, if omitted. */
|
|
|
|
|
#define LOG_LCHAN(lchan, level, fmt, args...) do { \
|
|
|
|
|
if (lchan->fi) \
|
|
|
|
|
LOGPFSML(lchan->fi, level, "(type=%s) " fmt, gsm_lchant_name(lchan->type), ## args); \
|
|
|
|
|
else \
|
|
|
|
|
LOGP(DRSL, level, "%s (not initialized) " fmt, gsm_lchan_name(lchan), ## args); \
|
|
|
|
|
} while(0)
|
|
|
|
|
|
|
|
|
|
enum lchan_fsm_state {
|
|
|
|
|
LCHAN_ST_UNUSED,
|
ts,lchan_fsm: do not attempt to allocate CBCH subslots
In case a given channel combination contains a CBCH, it replaces sub-slot 2
with a CBCH, i.e. we must not attempt to allocate the same for SDCCH.
On timeslot initialization, immediately place such an lchan FSM into new state
LCHAN_ST_CBCH, so that it never appears unused and never is picked during
lchan_select(). Also set lchan->type = GSM_LCHAN_CBCH.
Verified by configuring CBCH timeslots and watching 'show lchan summary'.
Immediately after RSL and OML are up, these pchan types show lchan 2 in state
CBCH:
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
With a 'phys_chan_config ccch+sdcch4+cbch' and three phones simultaneously
requesting USSD, I see:
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 0, Type SDCCH, State ESTABLISHED - L1 MS Power: 14 dBm RXL-FULL-dl: -53 dBm RXL-FULL-ul: -47 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 1, Type SDCCH, State ESTABLISHED - L1 MS Power: 30 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 3, Type SDCCH, State ESTABLISHED - L1 MS Power: 16 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm
With 'phys_chan_config SDCCH8+CBCH' and three phones simultaneously attaching,
I see:
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 0, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 1, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 3, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
i.e. in all cases the CBCH lchan remains occupied and is not allocated as
SDCCH.
Detaching and re-attaching the BTS reliably brings back the CBCH state. Also
verified that changing the osmo-bsc config from telnet vty and dropping oml
followed by the BTS re-attaching brings back the CBCH state.
Change-Id: I2bafc5f696e818e38f8907ad0c8f38494df0623d
2018-09-10 22:47:29 +00:00
|
|
|
LCHAN_ST_CBCH, /*< Blocked by CBCH channel combination, not usable as SDCCH. */
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
LCHAN_ST_WAIT_TS_READY,
|
|
|
|
|
LCHAN_ST_WAIT_ACTIV_ACK, /*< After RSL Chan Act Ack, lchan is active but RTP not configured. */
|
2018-07-12 19:23:26 +00:00
|
|
|
LCHAN_ST_WAIT_RLL_RTP_ESTABLISH,
|
2020-08-21 18:47:49 +00:00
|
|
|
LCHAN_ST_WAIT_RR_CHAN_MODE_MODIFY_ACK,
|
|
|
|
|
LCHAN_ST_WAIT_RSL_CHAN_MODE_MODIFY_ACK,
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
LCHAN_ST_ESTABLISHED, /*< Active and RTP is fully configured. */
|
2018-07-12 19:23:26 +00:00
|
|
|
LCHAN_ST_WAIT_RLL_RTP_RELEASED,
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
LCHAN_ST_WAIT_BEFORE_RF_RELEASE,
|
|
|
|
|
LCHAN_ST_WAIT_RF_RELEASE_ACK,
|
|
|
|
|
LCHAN_ST_WAIT_AFTER_ERROR,
|
|
|
|
|
LCHAN_ST_BORKEN,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum lchan_fsm_event {
|
|
|
|
|
LCHAN_EV_ACTIVATE,
|
|
|
|
|
LCHAN_EV_TS_READY,
|
|
|
|
|
LCHAN_EV_TS_ERROR,
|
|
|
|
|
LCHAN_EV_RSL_CHAN_ACTIV_ACK,
|
|
|
|
|
LCHAN_EV_RSL_CHAN_ACTIV_NACK,
|
|
|
|
|
LCHAN_EV_RLL_ESTABLISH_IND,
|
2018-07-12 19:23:26 +00:00
|
|
|
LCHAN_EV_RTP_READY,
|
|
|
|
|
LCHAN_EV_RTP_ERROR,
|
|
|
|
|
LCHAN_EV_RTP_RELEASED,
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
LCHAN_EV_RLL_REL_IND,
|
|
|
|
|
LCHAN_EV_RLL_REL_CONF,
|
|
|
|
|
LCHAN_EV_RSL_RF_CHAN_REL_ACK,
|
|
|
|
|
LCHAN_EV_RLL_ERR_IND,
|
2020-08-21 18:47:49 +00:00
|
|
|
LCHAN_EV_RR_CHAN_MODE_MODIFY_ACK,
|
|
|
|
|
LCHAN_EV_RR_CHAN_MODE_MODIFY_ERROR,
|
|
|
|
|
LCHAN_EV_RSL_CHAN_MODE_MODIFY_ACK,
|
|
|
|
|
LCHAN_EV_RSL_CHAN_MODE_MODIFY_NACK,
|
|
|
|
|
LCHAN_EV_REQUEST_MODE_MODIFY,
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
void lchan_fsm_init();
|
|
|
|
|
|
|
|
|
|
void lchan_fsm_alloc(struct gsm_lchan *lchan);
|
2018-11-06 21:24:07 +00:00
|
|
|
void lchan_release(struct gsm_lchan *lchan, bool do_rr_release,
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
bool err, enum gsm48_rr_cause cause_rr);
|
|
|
|
|
|
|
|
|
|
void lchan_activate(struct gsm_lchan *lchan, struct lchan_activate_info *info);
|
2018-07-12 19:23:26 +00:00
|
|
|
void lchan_ready_to_switch_rtp(struct gsm_lchan *lchan);
|
large refactoring: use FSMs for lchans; add inter-BSC HO
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
|
|
|
|
|
|
|
|
static inline const char *lchan_state_name(struct gsm_lchan *lchan)
|
|
|
|
|
{
|
|
|
|
|
return lchan->fi ? osmo_fsm_inst_state_name(lchan->fi) : "NULL";
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline bool lchan_state_is(struct gsm_lchan *lchan, uint32_t state)
|
|
|
|
|
{
|
|
|
|
|
return (!lchan->fi && state == LCHAN_ST_UNUSED)
|
|
|
|
|
|| (lchan->fi && lchan->fi->state == state);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bool lchan_may_receive_data(struct gsm_lchan *lchan);
|
|
|
|
|
|
|
|
|
|
void lchan_forget_conn(struct gsm_lchan *lchan);
|
2018-07-12 19:23:26 +00:00
|
|
|
|
|
|
|
|
void lchan_set_last_error(struct gsm_lchan *lchan, const char *fmt, ...);
|
