osmo-bsc/src/osmo-bsc/bsc_init.c

187 lines
5.6 KiB
C
Raw Normal View History

dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
/* A hackish minimal BSC (+MSC +HLR) implementation */
/* (C) 2008-2018 by Harald Welte <laforge@gnumonks.org>
* (C) 2009 by Holger Hans Peter Freyther <zecke@selfish.org>
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include <osmocom/bsc/gsm_data.h>
#include <osmocom/gsm/gsm_utils.h>
#include <osmocom/bsc/abis_rsl.h>
#include <osmocom/bsc/debug.h>
#include <osmocom/bsc/misdn.h>
#include <osmocom/bsc/system_information.h>
#include <osmocom/bsc/paging.h>
#include <osmocom/bsc/signal.h>
#include <osmocom/bsc/chan_alloc.h>
#include <osmocom/core/talloc.h>
#include <osmocom/bsc/ipaccess.h>
#include <osmocom/gsm/sysinfo.h>
#include <osmocom/bsc/pcu_if.h>
#include <osmocom/bsc/bsc_msc_data.h>
#include <osmocom/bsc/handover_cfg.h>
#include <osmocom/bsc/gsm_04_08_rr.h>
#include <osmocom/bsc/neighbor_ident.h>
#include <osmocom/bsc/bts.h>
#include <osmocom/bsc/lb.h>
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
#include <osmocom/bsc/smscb.h>
#include <osmocom/gsm/protocol/gsm_48_049.h>
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
#include <time.h>
#include <limits.h>
#include <stdbool.h>
static const struct osmo_stat_item_desc bsc_stat_desc[] = {
{ "num_bts:total", "Number of configured BTS for this BSC", "", 16, 0 },
};
static const struct osmo_stat_item_group_desc bsc_statg_desc = {
.group_name_prefix = "bsc",
.group_description = "base station controller",
.class_id = OSMO_STATS_CLASS_GLOBAL,
.num_items = ARRAY_SIZE(bsc_stat_desc),
.item_desc = bsc_stat_desc,
};
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
int bsc_shutdown_net(struct gsm_network *net)
{
struct gsm_bts *bts;
llist_for_each_entry(bts, &net->bts_list, list) {
LOGP(DNM, LOGL_NOTICE, "shutting down OML for BTS %u\n", bts->nr);
osmo_signal_dispatch(SS_L_GLOBAL, S_GLOBAL_BTS_CLOSE_OM, bts);
}
return 0;
}
/* XXX hard-coded for now */
#define T3122_CHAN_LOAD_SAMPLE_INTERVAL 1 /* in seconds */
static void update_t3122_chan_load_timer(void *data)
{
struct gsm_network *net = data;
struct gsm_bts *bts;
llist_for_each_entry(bts, &net->bts_list, list)
bts_update_t3122_chan_load(bts);
/* Keep this timer ticking. */
osmo_timer_schedule(&net->t3122_chan_load_timer, T3122_CHAN_LOAD_SAMPLE_INTERVAL, 0);
}
static void bsc_store_bts_uptime(void *data)
{
struct gsm_network *net = data;
struct gsm_bts *bts;
llist_for_each_entry(bts, &net->bts_list, list)
bts_store_uptime(bts);
/* Keep this timer ticking. */
osmo_timer_schedule(&net->bts_store_uptime_timer, BTS_STORE_UPTIME_INTERVAL, 0);
}
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
static struct gsm_network *bsc_network_init(void *ctx)
{
struct gsm_network *net = gsm_network_init(ctx);
net->cbc = talloc_zero(net, struct bsc_cbc_link);
if (!net->cbc) {
goto err_out;
}
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
/* Init back pointer */
net->auto_off_timeout = -1;
INIT_LLIST_HEAD(&net->mscs);
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
net->ho = ho_cfg_init(net, NULL);
net->hodec2.congestion_check_interval_s = HO_CFG_CONGESTION_CHECK_DEFAULT;
/* init statistics */
net->bsc_ctrs = rate_ctr_group_alloc(net, &bsc_ctrg_desc, 0);
if (!net->bsc_ctrs)
goto err_out;
net->bsc_statg = osmo_stat_item_group_alloc(net, &bsc_statg_desc, 0);
if (!net->bsc_statg)
goto err_free_bsc_ctr;
/* init statistics */
net->bts_unknown_ctrs = rate_ctr_group_alloc(net, &bts_ctrg_desc, BTS_STAT_IDX_UNKNOWN);
if (!net->bts_unknown_ctrs)
goto err_free_bsc_ctr_stat;
net->bts_unknown_statg = osmo_stat_item_group_alloc(net, &bts_statg_desc, BTS_STAT_IDX_UNKNOWN);
if (!net->bts_unknown_statg)
goto err_free_all;
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
INIT_LLIST_HEAD(&net->bts_rejected);
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
gsm_net_update_ctype(net);
/*
* At present all BTS in the network share one channel load timeout.
* If this becomes a problem for networks with a lot of BTS, this
* code could be refactored to run the timeout individually per BTS.
*/
osmo_timer_setup(&net->t3122_chan_load_timer, update_t3122_chan_load_timer, net);
osmo_timer_schedule(&net->t3122_chan_load_timer, T3122_CHAN_LOAD_SAMPLE_INTERVAL, 0);
/* Init uptime tracking timer. */
osmo_timer_setup(&net->bts_store_uptime_timer, bsc_store_bts_uptime, net);
osmo_timer_schedule(&net->bts_store_uptime_timer, BTS_STORE_UPTIME_INTERVAL, 0);
net->cbc->net = net;
net->cbc->mode = BSC_CBC_LINK_MODE_DISABLED;
net->cbc->server.local_addr = bsc_cbc_default_server_local_addr;
/* For CBSP client mode: default remote CBSP server port is CBSP_TCP_PORT == 48049. Leave the IP address unset.
* Also leave the local bind for the CBSP client disabled (unconfigured). */
net->cbc->client.remote_addr = (struct osmo_sockaddr_str){ .port = CBSP_TCP_PORT, };
net->cbc->client.local_addr = (struct osmo_sockaddr_str){};
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
return net;
err_free_all:
rate_ctr_group_free(net->bts_unknown_ctrs);
err_free_bsc_ctr_stat:
osmo_stat_item_group_free(net->bsc_statg);
err_free_bsc_ctr:
rate_ctr_group_free(net->bsc_ctrs);
err_out:
talloc_free(net);
return NULL;
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
}
int bsc_network_alloc(void)
{
/* initialize our data structures */
bsc_gsmnet = bsc_network_init(tall_bsc_ctx);
if (!bsc_gsmnet)
return -ENOMEM;
return 0;
}
struct gsm_bts *bsc_bts_alloc_register(struct gsm_network *net, enum gsm_bts_type type, uint8_t bsic)
{
struct gsm_bts *bts = gsm_bts_alloc_register(net, type, bsic);
OSMO_ASSERT(bts != NULL);
dissolve libbsc: move all to src/osmo-bsc, link .o files Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
2018-05-26 23:26:31 +00:00
bts->ho = ho_cfg_init(bts, net->ho);
return bts;
}