osmo-bsc/src/libmgcp/mgcp_network.c

1065 lines
29 KiB
C
Raw Normal View History

/* A Media Gateway Control Protocol Media Gateway: RFC 3435 */
/* The protocol implementation */
/*
* (C) 2009-2012 by Holger Hans Peter Freyther <zecke@selfish.org>
* (C) 2009-2012 by On-Waves
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include <string.h>
2010-05-13 18:14:09 +00:00
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <time.h>
#include <limits.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <osmocom/core/msgb.h>
#include <osmocom/core/select.h>
#include <osmocom/netif/rtp.h>
#include <openbsc/mgcp.h>
#include <openbsc/mgcp_internal.h>
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
#include <openbsc/osmux.h>
#warning "Make use of the rtp proxy code"
#define RTP_SEQ_MOD (1 << 16)
#define RTP_MAX_DROPOUT 3000
#define RTP_MAX_MISORDER 100
#define RTP_BUF_SIZE 4096
enum {
MGCP_PROTO_RTP,
MGCP_PROTO_RTCP,
};
/**
* This does not need to be a precision timestamp and
* is allowed to wrap quite fast. The returned value is
* 1/unit seconds.
*/
static uint32_t get_current_ts(unsigned unit)
{
struct timespec tp;
uint64_t ret;
if (!unit)
return 0;
memset(&tp, 0, sizeof(tp));
if (clock_gettime(CLOCK_MONOTONIC, &tp) != 0)
LOGP(DMGCP, LOGL_NOTICE,
"Getting the clock failed.\n");
/* convert it to 1/unit seconds */
ret = tp.tv_sec;
ret *= unit;
ret += (int64_t)tp.tv_nsec * unit / 1000 / 1000 / 1000;
return ret;
}
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
int mgcp_udp_send(int fd, struct in_addr *addr, int port, char *buf, int len)
{
struct sockaddr_in out;
out.sin_family = AF_INET;
out.sin_port = port;
memcpy(&out.sin_addr, addr, sizeof(*addr));
return sendto(fd, buf, len, 0, (struct sockaddr *)&out, sizeof(out));
}
int mgcp_send_dummy(struct mgcp_endpoint *endp)
{
static char buf[] = { MGCP_DUMMY_LOAD };
int rc;
int was_rtcp = 0;
rc = mgcp_udp_send(endp->net_end.rtp.fd, &endp->net_end.addr,
endp->net_end.rtp_port, buf, 1);
if (rc == -1)
goto failed;
if (endp->tcfg->omit_rtcp)
return rc;
was_rtcp = 1;
rc = mgcp_udp_send(endp->net_end.rtcp.fd, &endp->net_end.addr,
endp->net_end.rtcp_port, buf, 1);
if (rc >= 0)
return rc;
failed:
LOGP(DMGCP, LOGL_ERROR,
"Failed to send dummy %s packet: %s on: 0x%x to %s:%d\n",
was_rtcp ? "RTCP" : "RTP",
strerror(errno), ENDPOINT_NUMBER(endp), inet_ntoa(endp->net_end.addr),
was_rtcp ? endp->net_end.rtcp_port : endp->net_end.rtp_port);
return -1;
}
static int32_t compute_timestamp_aligment_error(struct mgcp_rtp_stream_state *sstate,
int ptime, uint32_t timestamp)
{
int32_t timestamp_delta;
if (ptime == 0)
return 0;
/* Align according to: T - Tlast = k * Tptime */
timestamp_delta = timestamp - sstate->last_timestamp;
return timestamp_delta % ptime;
}
static int check_rtp_timestamp(struct mgcp_endpoint *endp,
struct mgcp_rtp_state *state,
struct mgcp_rtp_stream_state *sstate,
struct mgcp_rtp_end *rtp_end,
struct sockaddr_in *addr,
uint16_t seq, uint32_t timestamp,
const char *text, int32_t *tsdelta_out)
{
int32_t tsdelta;
int32_t timestamp_error;
/* Not fully intialized, skip */
if (sstate->last_tsdelta == 0 && timestamp == sstate->last_timestamp)
return 0;
if (seq == sstate->last_seq) {
if (timestamp != sstate->last_timestamp) {
sstate->err_ts_counter += 1;
LOGP(DMGCP, LOGL_ERROR,
"The %s timestamp delta is != 0 but the sequence "
"number %d is the same, "
"TS offset: %d, SeqNo offset: %d "
"on 0x%x SSRC: %u timestamp: %u "
"from %s:%d in %d\n",
text, seq,
state->timestamp_offset, state->seq_offset,
ENDPOINT_NUMBER(endp), sstate->ssrc, timestamp,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
}
return 0;
}
tsdelta =
(int32_t)(timestamp - sstate->last_timestamp) /
(int16_t)(seq - sstate->last_seq);
if (tsdelta == 0) {
/* Don't update *tsdelta_out */
LOGP(DMGCP, LOGL_NOTICE,
"The %s timestamp delta is %d "
"on 0x%x SSRC: %u timestamp: %u "
"from %s:%d in %d\n",
text, tsdelta,
ENDPOINT_NUMBER(endp), sstate->ssrc, timestamp,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
return 0;
}
if (sstate->last_tsdelta != tsdelta) {
if (sstate->last_tsdelta) {
LOGP(DMGCP, LOGL_INFO,
"The %s timestamp delta changes from %d to %d "
"on 0x%x SSRC: %u timestamp: %u from %s:%d in %d\n",
text, sstate->last_tsdelta, tsdelta,
ENDPOINT_NUMBER(endp), sstate->ssrc, timestamp,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
}
}
if (tsdelta_out)
*tsdelta_out = tsdelta;
timestamp_error =
compute_timestamp_aligment_error(sstate, state->packet_duration,
timestamp);
if (timestamp_error) {
sstate->err_ts_counter += 1;
LOGP(DMGCP, LOGL_NOTICE,
"The %s timestamp has an alignment error of %d "
"on 0x%x SSRC: %u "
"SeqNo delta: %d, TS delta: %d, dTS/dSeq: %d "
"from %s:%d in mode %d. ptime: %d\n",
text, timestamp_error,
ENDPOINT_NUMBER(endp), sstate->ssrc,
(int16_t)(seq - sstate->last_seq),
(int32_t)(timestamp - sstate->last_timestamp),
tsdelta,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode, state->packet_duration);
}
return 1;
}
/* Set the timestamp offset according to the packet duration. */
static int adjust_rtp_timestamp_offset(struct mgcp_endpoint *endp,
struct mgcp_rtp_state *state,
struct mgcp_rtp_end *rtp_end,
struct sockaddr_in *addr,
int16_t delta_seq, uint32_t in_timestamp)
{
int32_t tsdelta = state->packet_duration;
int timestamp_offset;
uint32_t out_timestamp;
if (tsdelta == 0) {
tsdelta = state->out_stream.last_tsdelta;
if (tsdelta != 0) {
LOGP(DMGCP, LOGL_NOTICE,
"A fixed packet duration is not available on 0x%x, "
"using last output timestamp delta instead: %d "
"from %s:%d in %d\n",
ENDPOINT_NUMBER(endp), tsdelta,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
} else {
tsdelta = rtp_end->codec.rate * 20 / 1000;
LOGP(DMGCP, LOGL_NOTICE,
"Fixed packet duration and last timestamp delta "
"are not available on 0x%x, "
"using fixed 20ms instead: %d "
"from %s:%d in %d\n",
ENDPOINT_NUMBER(endp), tsdelta,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
}
}
out_timestamp = state->out_stream.last_timestamp + delta_seq * tsdelta;
timestamp_offset = out_timestamp - in_timestamp;
if (state->timestamp_offset != timestamp_offset) {
state->timestamp_offset = timestamp_offset;
LOGP(DMGCP, LOGL_NOTICE,
"Timestamp offset change on 0x%x SSRC: %u "
"SeqNo delta: %d, TS offset: %d, "
"from %s:%d in %d\n",
ENDPOINT_NUMBER(endp), state->in_stream.ssrc,
delta_seq, state->timestamp_offset,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
}
return timestamp_offset;
}
/* Set the timestamp offset according to the packet duration. */
static int align_rtp_timestamp_offset(struct mgcp_endpoint *endp,
struct mgcp_rtp_state *state,
struct mgcp_rtp_end *rtp_end,
struct sockaddr_in *addr,
uint32_t timestamp)
{
int timestamp_error = 0;
int ptime = state->packet_duration;
/* Align according to: T + Toffs - Tlast = k * Tptime */
timestamp_error = compute_timestamp_aligment_error(
&state->out_stream, ptime,
timestamp + state->timestamp_offset);
if (timestamp_error) {
state->timestamp_offset += ptime - timestamp_error;
LOGP(DMGCP, LOGL_NOTICE,
"Corrected timestamp alignment error of %d on 0x%x SSRC: %u "
"new TS offset: %d, "
"from %s:%d in %d\n",
timestamp_error,
ENDPOINT_NUMBER(endp), state->in_stream.ssrc,
state->timestamp_offset, inet_ntoa(addr->sin_addr),
ntohs(addr->sin_port), endp->conn_mode);
}
OSMO_ASSERT(compute_timestamp_aligment_error(&state->out_stream, ptime,
timestamp + state->timestamp_offset) == 0);
return timestamp_error;
}
int mgcp_rtp_processing_default(struct mgcp_endpoint *endp, struct mgcp_rtp_end *dst_end,
char *data, int *len, int buf_size)
{
return 0;
}
int mgcp_setup_rtp_processing_default(struct mgcp_endpoint *endp,
struct mgcp_rtp_end *dst_end,
struct mgcp_rtp_end *src_end)
{
return 0;
}
void mgcp_get_net_downlink_format_default(struct mgcp_endpoint *endp,
int *payload_type,
const char**audio_name,
const char**fmtp_extra)
{
/* Use the BTS side parameters when passing the SDP data (for
* downlink) to the net peer.
*/
*payload_type = endp->bts_end.codec.payload_type;
*audio_name = endp->bts_end.codec.audio_name;
*fmtp_extra = endp->bts_end.fmtp_extra;
}
void mgcp_rtp_annex_count(struct mgcp_endpoint *endp, struct mgcp_rtp_state *state,
const uint16_t seq, const int32_t transit,
const uint32_t ssrc)
{
int32_t d;
/* initialize or re-initialize */
if (!state->stats_initialized || state->stats_ssrc != ssrc) {
state->stats_initialized = 1;
state->stats_base_seq = seq;
state->stats_max_seq = seq - 1;
state->stats_ssrc = ssrc;
state->stats_jitter = 0;
state->stats_transit = transit;
state->stats_cycles = 0;
} else {
uint16_t udelta;
/*
* The below takes the shape of the validation of
* Appendix A. Check if there is something weird with
* the sequence number, otherwise check for a wrap
* around in the sequence number.
* It can't wrap during the initialization so let's
* skip it here. The Appendix A probably doesn't have
* this issue because of the probation.
*/
udelta = seq - state->stats_max_seq;
if (udelta < RTP_MAX_DROPOUT) {
if (seq < state->stats_max_seq)
state->stats_cycles += RTP_SEQ_MOD;
} else if (udelta <= RTP_SEQ_MOD - RTP_MAX_MISORDER) {
LOGP(DMGCP, LOGL_NOTICE,
"RTP seqno made a very large jump on 0x%x delta: %u\n",
ENDPOINT_NUMBER(endp), udelta);
}
}
/*
* Calculate the jitter between the two packages. The TS should be
* taken closer to the read function. This was taken from the
* Appendix A of RFC 3550. Timestamp and arrival_time have a 1/rate
* resolution.
*/
d = transit - state->stats_transit;
state->stats_transit = transit;
if (d < 0)
d = -d;
state->stats_jitter += d - ((state->stats_jitter + 8) >> 4);
state->stats_max_seq = seq;
}
/**
* The RFC 3550 Appendix A assumes there are multiple sources but
* some of the supported endpoints (e.g. the nanoBTS) can only handle
* one source and this code will patch RTP header to appear as if there
* is only one source.
* There is also no probation period for new sources. Every RTP header
* we receive will be seen as a switch in streams.
*/
void mgcp_patch_and_count(struct mgcp_endpoint *endp, struct mgcp_rtp_state *state,
struct mgcp_rtp_end *rtp_end, struct sockaddr_in *addr,
char *data, int len)
{
uint32_t arrival_time;
int32_t transit;
uint16_t seq;
uint32_t timestamp, ssrc;
struct rtp_hdr *rtp_hdr;
int payload = rtp_end->codec.payload_type;
if (len < sizeof(*rtp_hdr))
return;
rtp_hdr = (struct rtp_hdr *) data;
seq = ntohs(rtp_hdr->sequence);
timestamp = ntohl(rtp_hdr->timestamp);
arrival_time = get_current_ts(rtp_end->codec.rate);
ssrc = ntohl(rtp_hdr->ssrc);
transit = arrival_time - timestamp;
mgcp_rtp_annex_count(endp, state, seq, transit, ssrc);
if (!state->initialized) {
state->initialized = 1;
state->in_stream.last_seq = seq - 1;
state->in_stream.ssrc = state->orig_ssrc = ssrc;
state->in_stream.last_tsdelta = 0;
state->packet_duration = mgcp_rtp_packet_duration(endp, rtp_end);
state->out_stream = state->in_stream;
state->out_stream.last_timestamp = timestamp;
state->out_stream.ssrc = ssrc - 1; /* force output SSRC change */
LOGP(DMGCP, LOGL_INFO,
"Initializing stream on 0x%x SSRC: %u timestamp: %u "
"pkt-duration: %d, from %s:%d in %d\n",
ENDPOINT_NUMBER(endp), state->in_stream.ssrc,
state->seq_offset, state->packet_duration,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
if (state->packet_duration == 0) {
state->packet_duration = rtp_end->codec.rate * 20 / 1000;
LOGP(DMGCP, LOGL_NOTICE,
"Fixed packet duration is not available on 0x%x, "
"using fixed 20ms instead: %d from %s:%d in %d\n",
ENDPOINT_NUMBER(endp), state->packet_duration,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
}
} else if (state->in_stream.ssrc != ssrc) {
LOGP(DMGCP, LOGL_NOTICE,
"The SSRC changed on 0x%x: %u -> %u "
"from %s:%d in %d\n",
ENDPOINT_NUMBER(endp),
state->in_stream.ssrc, rtp_hdr->ssrc,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
state->in_stream.ssrc = ssrc;
if (rtp_end->force_constant_ssrc) {
int16_t delta_seq;
/* Always increment seqno by 1 */
state->seq_offset =
(state->out_stream.last_seq + 1) - seq;
/* Estimate number of packets that would have been sent */
delta_seq =
(arrival_time - state->in_stream.last_arrival_time
+ state->packet_duration/2) /
state->packet_duration;
adjust_rtp_timestamp_offset(endp, state, rtp_end, addr,
delta_seq, timestamp);
state->patch_ssrc = 1;
ssrc = state->orig_ssrc;
if (rtp_end->force_constant_ssrc != -1)
rtp_end->force_constant_ssrc -= 1;
LOGP(DMGCP, LOGL_NOTICE,
"SSRC patching enabled on 0x%x SSRC: %u "
"SeqNo offset: %d, TS offset: %d "
"from %s:%d in %d\n",
ENDPOINT_NUMBER(endp), state->in_stream.ssrc,
state->seq_offset, state->timestamp_offset,
inet_ntoa(addr->sin_addr), ntohs(addr->sin_port),
endp->conn_mode);
}
state->in_stream.last_tsdelta = 0;
} else {
/* Compute current per-packet timestamp delta */
check_rtp_timestamp(endp, state, &state->in_stream, rtp_end, addr,
seq, timestamp, "input",
&state->in_stream.last_tsdelta);
if (state->patch_ssrc)
ssrc = state->orig_ssrc;
}
/* Save before patching */
state->in_stream.last_timestamp = timestamp;
state->in_stream.last_seq = seq;
state->in_stream.last_arrival_time = arrival_time;
if (rtp_end->force_aligned_timing &&
state->out_stream.ssrc == ssrc && state->packet_duration)
/* Align the timestamp offset */
align_rtp_timestamp_offset(endp, state, rtp_end, addr, timestamp);
/* Store the updated SSRC back to the packet */
if (state->patch_ssrc)
rtp_hdr->ssrc = htonl(ssrc);
/* Apply the offset and store it back to the packet.
* This won't change anything if the offset is 0, so the conditional is
* omitted. */
seq += state->seq_offset;
rtp_hdr->sequence = htons(seq);
timestamp += state->timestamp_offset;
rtp_hdr->timestamp = htonl(timestamp);
/* Check again, whether the timestamps are still valid */
if (state->out_stream.ssrc == ssrc)
check_rtp_timestamp(endp, state, &state->out_stream, rtp_end,
addr, seq, timestamp, "output",
&state->out_stream.last_tsdelta);
/* Save output values */
state->out_stream.last_seq = seq;
state->out_stream.last_timestamp = timestamp;
state->out_stream.ssrc = ssrc;
if (payload < 0)
return;
rtp_hdr->payload_type = payload;
}
/*
* The below code is for dispatching. We have a dedicated port for
* the data coming from the net and one to discover the BTS.
*/
static int forward_data(int fd, struct mgcp_rtp_tap *tap, const char *buf, int len)
{
if (!tap->enabled)
return 0;
return sendto(fd, buf, len, 0,
(struct sockaddr *)&tap->forward, sizeof(tap->forward));
}
static int mgcp_send_transcoder(struct mgcp_rtp_end *end,
struct mgcp_config *cfg, int is_rtp,
const char *buf, int len)
{
int rc;
int port;
struct sockaddr_in addr;
port = is_rtp ? end->rtp_port : end->rtcp_port;
addr.sin_family = AF_INET;
addr.sin_addr = cfg->transcoder_in;
addr.sin_port = port;
rc = sendto(is_rtp ?
end->rtp.fd :
end->rtcp.fd, buf, len, 0,
(struct sockaddr *) &addr, sizeof(addr));
if (rc != len)
LOGP(DMGCP, LOGL_ERROR,
"Failed to send data to the transcoder: %s\n",
strerror(errno));
return rc;
}
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
int mgcp_send(struct mgcp_endpoint *endp, int dest, int is_rtp,
struct sockaddr_in *addr, char *buf, int rc)
{
struct mgcp_trunk_config *tcfg = endp->tcfg;
struct mgcp_rtp_end *rtp_end;
struct mgcp_rtp_state *rtp_state;
int tap_idx;
/* For loop toggle the destination and then dispatch. */
if (tcfg->audio_loop)
dest = !dest;
/* Loop based on the conn_mode, maybe undoing the above */
if (endp->conn_mode == MGCP_CONN_LOOPBACK)
dest = !dest;
if (dest == MGCP_DEST_NET) {
rtp_end = &endp->net_end;
rtp_state = &endp->bts_state;
tap_idx = MGCP_TAP_NET_OUT;
} else {
rtp_end = &endp->bts_end;
rtp_state = &endp->net_state;
tap_idx = MGCP_TAP_BTS_OUT;
}
if (!rtp_end->output_enabled)
rtp_end->dropped_packets += 1;
else if (is_rtp) {
int cont;
int nbytes = 0;
int len = rc;
do {
cont = endp->cfg->rtp_processing_cb(endp, rtp_end,
buf, &len, RTP_BUF_SIZE);
if (cont < 0)
break;
mgcp_patch_and_count(endp, rtp_state, rtp_end, addr, buf, len);
forward_data(rtp_end->rtp.fd, &endp->taps[tap_idx],
buf, len);
rc = mgcp_udp_send(rtp_end->rtp.fd,
&rtp_end->addr,
rtp_end->rtp_port, buf, len);
if (rc <= 0)
return rc;
nbytes += rc;
len = cont;
} while (len > 0);
return nbytes;
} else if (!tcfg->omit_rtcp) {
return mgcp_udp_send(rtp_end->rtcp.fd,
&rtp_end->addr,
rtp_end->rtcp_port, buf, rc);
}
return 0;
}
2011-06-02 17:04:22 +00:00
static int receive_from(struct mgcp_endpoint *endp, int fd, struct sockaddr_in *addr,
char *buf, int bufsize)
{
int rc;
socklen_t slen = sizeof(*addr);
rc = recvfrom(fd, buf, bufsize, 0,
(struct sockaddr *) addr, &slen);
if (rc < 0) {
LOGP(DMGCP, LOGL_ERROR, "Failed to receive message on: 0x%x errno: %d/%s\n",
ENDPOINT_NUMBER(endp), errno, strerror(errno));
return -1;
}
/* do not forward aynthing... maybe there is a packet from the bts */
if (!endp->allocated)
return -1;
#warning "Slight spec violation. With connection mode recvonly we should attempt to forward."
return rc;
}
static int rtp_data_net(struct osmo_fd *fd, unsigned int what)
{
char buf[RTP_BUF_SIZE];
struct sockaddr_in addr;
struct mgcp_endpoint *endp;
int rc, proto;
endp = (struct mgcp_endpoint *) fd->data;
2011-06-02 17:04:22 +00:00
rc = receive_from(endp, fd->fd, &addr, buf, sizeof(buf));
if (rc <= 0)
return -1;
if (memcmp(&addr.sin_addr, &endp->net_end.addr, sizeof(addr.sin_addr)) != 0) {
LOGP(DMGCP, LOGL_ERROR,
"Endpoint 0x%x data from wrong address %s vs. ",
ENDPOINT_NUMBER(endp), inet_ntoa(addr.sin_addr));
LOGPC(DMGCP, LOGL_ERROR,
"%s\n", inet_ntoa(endp->net_end.addr));
return -1;
}
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
switch(endp->type) {
case MGCP_RTP_DEFAULT:
case MGCP_RTP_TRANSCODED:
if (endp->net_end.rtp_port != addr.sin_port &&
endp->net_end.rtcp_port != addr.sin_port) {
LOGP(DMGCP, LOGL_ERROR,
"Data from wrong source port %d on 0x%x\n",
ntohs(addr.sin_port), ENDPOINT_NUMBER(endp));
return -1;
}
break;
case MGCP_OSMUX_BSC:
case MGCP_OSMUX_BSC_NAT:
break;
}
/* throw away the dummy message */
if (rc == 1 && buf[0] == MGCP_DUMMY_LOAD) {
LOGP(DMGCP, LOGL_NOTICE, "Filtered dummy from network on 0x%x\n",
ENDPOINT_NUMBER(endp));
return 0;
}
proto = fd == &endp->net_end.rtp ? MGCP_PROTO_RTP : MGCP_PROTO_RTCP;
endp->net_end.packets += 1;
endp->net_end.octets += rc;
forward_data(fd->fd, &endp->taps[MGCP_TAP_NET_IN], buf, rc);
switch (endp->type) {
case MGCP_RTP_DEFAULT:
return mgcp_send(endp, MGCP_DEST_BTS, proto == MGCP_PROTO_RTP,
&addr, buf, rc);
case MGCP_RTP_TRANSCODED:
return mgcp_send_transcoder(&endp->trans_net, endp->cfg,
proto == MGCP_PROTO_RTP, buf, rc);
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
case MGCP_OSMUX_BSC_NAT:
return osmux_xfrm_to_osmux(MGCP_DEST_BTS, buf, rc, endp);
case MGCP_OSMUX_BSC: /* Should not happen */
break;
}
LOGP(DMGCP, LOGL_ERROR, "Bad MGCP type %u on endpoint %u\n",
endp->type, ENDPOINT_NUMBER(endp));
return 0;
}
static void discover_bts(struct mgcp_endpoint *endp, int proto, struct sockaddr_in *addr)
{
struct mgcp_config *cfg = endp->cfg;
if (proto == MGCP_PROTO_RTP && endp->bts_end.rtp_port == 0) {
if (!cfg->bts_ip ||
memcmp(&addr->sin_addr,
&cfg->bts_in, sizeof(cfg->bts_in)) == 0 ||
memcmp(&addr->sin_addr,
&endp->bts_end.addr, sizeof(endp->bts_end.addr)) == 0) {
endp->bts_end.rtp_port = addr->sin_port;
endp->bts_end.addr = addr->sin_addr;
LOGP(DMGCP, LOGL_NOTICE,
"Found BTS for endpoint: 0x%x on port: %d/%d of %s\n",
ENDPOINT_NUMBER(endp), ntohs(endp->bts_end.rtp_port),
ntohs(endp->bts_end.rtcp_port), inet_ntoa(addr->sin_addr));
}
} else if (proto == MGCP_PROTO_RTCP && endp->bts_end.rtcp_port == 0) {
if (memcmp(&endp->bts_end.addr, &addr->sin_addr,
sizeof(endp->bts_end.addr)) == 0) {
endp->bts_end.rtcp_port = addr->sin_port;
}
}
}
static int rtp_data_bts(struct osmo_fd *fd, unsigned int what)
{
char buf[RTP_BUF_SIZE];
struct sockaddr_in addr;
struct mgcp_endpoint *endp;
int rc, proto;
endp = (struct mgcp_endpoint *) fd->data;
2011-06-02 17:04:22 +00:00
rc = receive_from(endp, fd->fd, &addr, buf, sizeof(buf));
if (rc <= 0)
return -1;
proto = fd == &endp->bts_end.rtp ? MGCP_PROTO_RTP : MGCP_PROTO_RTCP;
/* We have no idea who called us, maybe it is the BTS. */
/* it was the BTS... */
discover_bts(endp, proto, &addr);
if (memcmp(&endp->bts_end.addr, &addr.sin_addr, sizeof(addr.sin_addr)) != 0) {
LOGP(DMGCP, LOGL_ERROR,
"Data from wrong bts %s on 0x%x\n",
inet_ntoa(addr.sin_addr), ENDPOINT_NUMBER(endp));
return -1;
}
if (endp->bts_end.rtp_port != addr.sin_port &&
endp->bts_end.rtcp_port != addr.sin_port) {
LOGP(DMGCP, LOGL_ERROR,
"Data from wrong bts source port %d on 0x%x\n",
ntohs(addr.sin_port), ENDPOINT_NUMBER(endp));
return -1;
}
/* throw away the dummy message */
if (rc == 1 && buf[0] == MGCP_DUMMY_LOAD) {
LOGP(DMGCP, LOGL_NOTICE, "Filtered dummy from bts on 0x%x\n",
ENDPOINT_NUMBER(endp));
return 0;
}
/* do this before the loop handling */
endp->bts_end.packets += 1;
endp->bts_end.octets += rc;
forward_data(fd->fd, &endp->taps[MGCP_TAP_BTS_IN], buf, rc);
switch (endp->type) {
case MGCP_RTP_DEFAULT:
return mgcp_send(endp, MGCP_DEST_NET, proto == MGCP_PROTO_RTP,
&addr, buf, rc);
case MGCP_RTP_TRANSCODED:
return mgcp_send_transcoder(&endp->trans_bts, endp->cfg,
proto == MGCP_PROTO_RTP, buf, rc);
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
case MGCP_OSMUX_BSC:
/* OSMUX translation: BTS -> BSC */
return osmux_xfrm_to_osmux(MGCP_DEST_NET, buf, rc, endp);
case MGCP_OSMUX_BSC_NAT:
break; /* Should not happen */
}
LOGP(DMGCP, LOGL_ERROR, "Bad MGCP type %u on endpoint %u\n",
endp->type, ENDPOINT_NUMBER(endp));
return 0;
}
static int rtp_data_transcoder(struct mgcp_rtp_end *end, struct mgcp_endpoint *_endp,
int dest, struct osmo_fd *fd)
{
char buf[RTP_BUF_SIZE];
struct sockaddr_in addr;
struct mgcp_config *cfg;
int rc, proto;
cfg = _endp->cfg;
2011-06-02 17:04:22 +00:00
rc = receive_from(_endp, fd->fd, &addr, buf, sizeof(buf));
if (rc <= 0)
return -1;
proto = fd == &end->rtp ? MGCP_PROTO_RTP : MGCP_PROTO_RTCP;
if (memcmp(&addr.sin_addr, &cfg->transcoder_in, sizeof(addr.sin_addr)) != 0) {
LOGP(DMGCP, LOGL_ERROR,
"Data not coming from transcoder dest: %d %s on 0x%x\n",
dest, inet_ntoa(addr.sin_addr), ENDPOINT_NUMBER(_endp));
return -1;
}
if (end->rtp_port != addr.sin_port &&
end->rtcp_port != addr.sin_port) {
LOGP(DMGCP, LOGL_ERROR,
"Data from wrong transcoder dest %d source port %d on 0x%x\n",
dest, ntohs(addr.sin_port), ENDPOINT_NUMBER(_endp));
return -1;
}
/* throw away the dummy message */
if (rc == 1 && buf[0] == MGCP_DUMMY_LOAD) {
LOGP(DMGCP, LOGL_NOTICE, "Filtered dummy from transcoder dest %d on 0x%x\n",
dest, ENDPOINT_NUMBER(_endp));
return 0;
}
end->packets += 1;
return mgcp_send(_endp, dest, proto == MGCP_PROTO_RTP, &addr, buf, rc);
}
static int rtp_data_trans_net(struct osmo_fd *fd, unsigned int what)
{
struct mgcp_endpoint *endp;
endp = (struct mgcp_endpoint *) fd->data;
return rtp_data_transcoder(&endp->trans_net, endp, MGCP_DEST_NET, fd);
}
static int rtp_data_trans_bts(struct osmo_fd *fd, unsigned int what)
{
struct mgcp_endpoint *endp;
endp = (struct mgcp_endpoint *) fd->data;
return rtp_data_transcoder(&endp->trans_bts, endp, MGCP_DEST_BTS, fd);
}
mgcp: add voice muxer support This patch adds the voice muxer. You can use this to batch RTP traffic to reduce bandwidth comsuption. Basically, osmux transforms RTP flows to a compact batch format, that is later on decompacted to its original form. Port UDP/1984 is used for the muxer traffic between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This feature depends on libosmo-netif, which contains the osmux core support. Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using the vendor-specific extension X-Osmux: on) coming from the BSC-NAT, so you can selectively enable osmux per BSC from one the bsc-nat.cfg file, so we have a centralized point to enable/disable osmux. First thing you need to do is to accept requests to use Osmux, this can be done from VTY interface of osmo-bsc_nat and osmo-bsc_mgcp by adding the following line: mgcp ... osmux on osmux batch-factor 4 This just initializes the osmux engine. You still have to specify what BSC uses osmux from osmo-bsc_nat configuration file: ... bsc 1 osmux on bsc 2 ... bsc 3 osmux on In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does not have osmux enabled. Thus, you can selectively enable osmux depending on the BSC, and we have a centralized point for configuration from the bsc-nat to enable osmux on demand, as suggested by Holger. At this moment, this patch contains heavy debug logging for each RTP packet that can be removed later to save cycles. The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that is received to configure an endpoint.
2014-02-05 17:56:17 +00:00
int mgcp_create_bind(const char *source_addr, struct osmo_fd *fd, int port)
{
struct sockaddr_in addr;
int on = 1;
fd->fd = socket(AF_INET, SOCK_DGRAM, 0);
if (fd->fd < 0) {
LOGP(DMGCP, LOGL_ERROR, "Failed to create UDP port.\n");
return -1;
}
setsockopt(fd->fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET;
addr.sin_port = htons(port);
inet_aton(source_addr, &addr.sin_addr);
if (bind(fd->fd, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
close(fd->fd);
fd->fd = -1;
return -1;
}
return 0;
}
int mgcp_set_ip_tos(int fd, int tos)
{
int ret;
ret = setsockopt(fd, IPPROTO_IP, IP_TOS,
&tos, sizeof(tos));
return ret != 0;
}
static int bind_rtp(struct mgcp_config *cfg, const char *source_addr,
struct mgcp_rtp_end *rtp_end, int endpno)
{
if (mgcp_create_bind(source_addr, &rtp_end->rtp,
rtp_end->local_port) != 0) {
LOGP(DMGCP, LOGL_ERROR, "Failed to create RTP port: %s:%d on 0x%x\n",
source_addr, rtp_end->local_port, endpno);
goto cleanup0;
}
if (mgcp_create_bind(source_addr, &rtp_end->rtcp,
rtp_end->local_port + 1) != 0) {
LOGP(DMGCP, LOGL_ERROR, "Failed to create RTCP port: %s:%d on 0x%x\n",
source_addr, rtp_end->local_port + 1, endpno);
goto cleanup1;
}
mgcp_set_ip_tos(rtp_end->rtp.fd, cfg->endp_dscp);
mgcp_set_ip_tos(rtp_end->rtcp.fd, cfg->endp_dscp);
rtp_end->rtp.when = BSC_FD_READ;
if (osmo_fd_register(&rtp_end->rtp) != 0) {
LOGP(DMGCP, LOGL_ERROR, "Failed to register RTP port %d on 0x%x\n",
rtp_end->local_port, endpno);
goto cleanup2;
}
rtp_end->rtcp.when = BSC_FD_READ;
if (osmo_fd_register(&rtp_end->rtcp) != 0) {
LOGP(DMGCP, LOGL_ERROR, "Failed to register RTCP port %d on 0x%x\n",
rtp_end->local_port + 1, endpno);
goto cleanup3;
}
return 0;
cleanup3:
osmo_fd_unregister(&rtp_end->rtp);
cleanup2:
close(rtp_end->rtcp.fd);
rtp_end->rtcp.fd = -1;
cleanup1:
close(rtp_end->rtp.fd);
rtp_end->rtp.fd = -1;
cleanup0:
return -1;
}
static int int_bind(const char *port,
struct mgcp_rtp_end *end, int (*cb)(struct osmo_fd *, unsigned),
struct mgcp_endpoint *_endp,
const char *source_addr, int rtp_port)
{
if (end->rtp.fd != -1 || end->rtcp.fd != -1) {
LOGP(DMGCP, LOGL_ERROR, "Previous %s was still bound on %d\n",
port, ENDPOINT_NUMBER(_endp));
mgcp_free_rtp_port(end);
}
end->local_port = rtp_port;
end->rtp.cb = cb;
end->rtp.data = _endp;
end->rtcp.data = _endp;
end->rtcp.cb = cb;
return bind_rtp(_endp->cfg, source_addr, end, ENDPOINT_NUMBER(_endp));
}
int mgcp_bind_bts_rtp_port(struct mgcp_endpoint *endp, int rtp_port)
{
return int_bind("bts-port", &endp->bts_end,
rtp_data_bts, endp,
mgcp_bts_src_addr(endp), rtp_port);
}
int mgcp_bind_net_rtp_port(struct mgcp_endpoint *endp, int rtp_port)
{
return int_bind("net-port", &endp->net_end,
rtp_data_net, endp,
mgcp_net_src_addr(endp), rtp_port);
}
int mgcp_bind_trans_net_rtp_port(struct mgcp_endpoint *endp, int rtp_port)
{
return int_bind("trans-net", &endp->trans_net,
rtp_data_trans_net, endp,
endp->cfg->source_addr, rtp_port);
}
int mgcp_bind_trans_bts_rtp_port(struct mgcp_endpoint *endp, int rtp_port)
{
return int_bind("trans-bts", &endp->trans_bts,
rtp_data_trans_bts, endp,
endp->cfg->source_addr, rtp_port);
}
int mgcp_free_rtp_port(struct mgcp_rtp_end *end)
{
if (end->rtp.fd != -1) {
close(end->rtp.fd);
end->rtp.fd = -1;
osmo_fd_unregister(&end->rtp);
}
if (end->rtcp.fd != -1) {
close(end->rtcp.fd);
end->rtcp.fd = -1;
osmo_fd_unregister(&end->rtcp);
}
return 0;
}
void mgcp_state_calc_loss(struct mgcp_rtp_state *state,
struct mgcp_rtp_end *end, uint32_t *expected,
int *loss)
{
*expected = state->stats_cycles + state->stats_max_seq;
*expected = *expected - state->stats_base_seq + 1;
if (!state->stats_initialized) {
*expected = 0;
*loss = 0;
return;
}
/*
* Make sure the sign is correct and use the biggest
* positive/negative number that fits.
*/
*loss = *expected - end->packets;
if (*expected < end->packets) {
if (*loss > 0)
*loss = INT_MIN;
} else {
if (*loss < 0)
*loss = INT_MAX;
}
}
uint32_t mgcp_state_calc_jitter(struct mgcp_rtp_state *state)
{
if (!state->stats_initialized)
return 0;
return state->stats_jitter >> 4;
}