2016-02-20 09:56:10 +00:00
<vtydoc xmlns= 'urn:osmocom:xml:libosmocore:vty:doc:1.0' >
2017-09-18 16:32:30 +00:00
<node id= 'Password' >
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= '_1' >
2016-02-20 09:56:10 +00:00
<command id= 'show version' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'version' doc= 'Displays program version' />
</params>
</command>
<command id= 'show online-help' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'online-help' doc= 'Online help' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'enable' >
<params >
<param name= 'enable' doc= 'Turn on privileged mode command' />
</params>
</command>
<command id= 'terminal length <0-512>' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'length' doc= 'Set number of lines on a screen' />
<param name= '<0-512>' doc= 'Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id= 'terminal no length' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'length' doc= 'Set number of lines on a screen' />
</params>
</command>
<command id= 'echo .MESSAGE' >
<params >
<param name= 'echo' doc= 'Echo a message back to the vty' />
<param name= '.MESSAGE' doc= 'The message to echo' />
</params>
</command>
<command id= 'who' >
<params >
<param name= 'who' doc= 'Display who is on vty' />
</params>
</command>
<command id= 'show history' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'history' doc= 'Display the session command history' />
</params>
</command>
<command id= 'show network' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'network' doc= 'Display information about a GSM NETWORK' />
</params>
</command>
<command id= 'show bts [<0-255>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'bts' doc= 'Display information about a BTS' />
<param name= '[<0-255>]' doc= 'BTS number' />
</params>
</command>
<command id= 'show trx [<0-255>] [<0-255>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'trx' doc= 'Display information about a TRX' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
</params>
</command>
<command id= 'show timeslot [<0-255>] [<0-255>] [<0-7>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'timeslot' doc= 'Display information about a TS' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
<param name= '[<0-7>]' doc= 'Timeslot Number' />
</params>
</command>
<command id= 'show lchan [<0-255>] [<0-255>] [<0-7>] [lchan_nr]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'lchan' doc= 'Display information about a logical channel' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
<param name= '[<0-7>]' doc= 'Timeslot Number' />
<param name= '[lchan_nr]' doc= 'Logical Channel Number' />
</params>
</command>
<command id= 'show lchan summary [<0-255>] [<0-255>] [<0-7>] [lchan_nr]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'lchan' doc= 'Display information about a logical channel' />
<param name= 'summary' doc= 'Short summary' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
<param name= '[<0-7>]' doc= 'Timeslot Number' />
<param name= '[lchan_nr]' doc= 'Logical Channel Number' />
</params>
</command>
<command id= 'show paging [<0-255>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'paging' doc= 'Display information about paging reuqests of a BTS' />
<param name= '[<0-255>]' doc= 'BTS Number' />
</params>
</command>
<command id= 'show paging-group <0-255> IMSI' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'paging-group' doc= 'Display the paging group' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'IMSI' doc= 'IMSI' />
</params>
</command>
<command id= 'logging enable' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'enable' doc= 'Enables logging to this vty' />
</params>
</command>
<command id= 'logging disable' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'disable' doc= 'Disables logging to this vty' />
</params>
</command>
<command id= 'logging filter all (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'all' doc= 'Do you want to log all messages?' />
<param name= '0' doc= 'Only print messages matched by other filters' />
<param name= '1' doc= 'Bypass filter and print all messages' />
</params>
</command>
<command id= 'logging color (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'color' doc= 'Configure color-printing for log messages' />
<param name= '0' doc= 'Don't use color for printing messages' />
<param name= '1' doc= 'Use color for printing messages' />
</params>
</command>
<command id= 'logging timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'logging print extended-timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'extended-timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id= 'logging print category (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem name' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'logging set-log-mask MASK' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'set-log-mask' doc= 'Set the logmask of this logging target' />
<param name= 'MASK' doc= 'The logmask to use' />
</params>
</command>
<command id= 'logging set log mask MASK' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'set' doc= 'Decide which categories to output.' />
<param name= 'log' doc= 'Log commands' />
<param name= 'mask' doc= 'Mask commands' />
<param name= 'MASK' doc= 'The logmask to use' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'all' doc= 'Global setting for all subsystems' />
<param name= 'rll' doc= 'A-bis Radio Link Layer (RLL)' />
<param name= 'cc' doc= 'Layer3 Call Control (CC)' />
<param name= 'mm' doc= 'Layer3 Mobility Management (MM)' />
<param name= 'rr' doc= 'Layer3 Radio Resource (RR)' />
<param name= 'rsl' doc= 'A-bis Radio Siganlling Link (RSL)' />
<param name= 'nm' doc= 'A-bis Network Management / O&M (NM/OML)' />
<param name= 'mncc' doc= 'MNCC API for Call Control application' />
<param name= 'pag' doc= 'Paging Subsystem' />
<param name= 'meas' doc= 'Radio Measurement Processing' />
<param name= 'sccp' doc= 'SCCP Protocol' />
<param name= 'msc' doc= 'Mobile Switching Center' />
<param name= 'mgcp' doc= 'Media Gateway Control Protocol' />
<param name= 'ho' doc= 'Hand-Over' />
<param name= 'db' doc= 'Database Layer' />
<param name= 'ref' doc= 'Reference Counting' />
<param name= 'gprs' doc= 'GPRS Packet Service' />
<param name= 'ns' doc= 'GPRS Network Service (NS)' />
<param name= 'bssgp' doc= 'GPRS BSS Gateway Protocol (BSSGP)' />
<param name= 'llc' doc= 'GPRS Logical Link Control Protocol (LLC)' />
<param name= 'sndcp' doc= 'GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
<param name= 'nat' doc= 'GSM 08.08 NAT/Multiplexer' />
<param name= 'ctrl' doc= 'Control interface' />
<param name= 'smpp' doc= 'SMPP interface for external SMS apps' />
2017-03-08 14:37:25 +00:00
<param name= 'filter' doc= 'BSC/NAT IMSI based filtering' />
<param name= 'ranap' doc= 'Radio Access Network Application Part Protocol' />
<param name= 'sua' doc= 'SCCP User Adaptation Protocol' />
2017-09-18 16:32:30 +00:00
<param name= 'pcu' doc= 'PCU Interface' />
2016-02-20 09:56:10 +00:00
<param name= 'lglobal' doc= 'Library-internal global log family' />
<param name= 'llapd' doc= 'LAPD in libosmogsm' />
<param name= 'linp' doc= 'A-bis Intput Subsystem' />
<param name= 'lmux' doc= 'A-bis B-Subchannel TRAU Frame Multiplex' />
<param name= 'lmi' doc= 'A-bis Input Driver for Signalling' />
<param name= 'lmib' doc= 'A-bis Input Driver for B-Channels (voice)' />
<param name= 'lsms' doc= 'Layer3 Short Message Service (SMS)' />
2017-03-08 14:37:25 +00:00
<param name= 'lctrl' doc= 'Control Interface' />
<param name= 'lgtp' doc= 'GPRS GTP library' />
<param name= 'lstats' doc= 'Statistics messages and logging' />
2017-09-18 16:32:30 +00:00
<param name= 'lgsup' doc= 'Generic Subscriber Update Protocol' />
<param name= 'loap' doc= 'Osmocom Authentication Protocol' />
<param name= 'lss7' doc= 'libosmo-sigtran Signalling System 7' />
<param name= 'lsccp' doc= 'libosmo-sigtran SCCP Implementation' />
<param name= 'lsua' doc= 'libosmo-sigtran SCCP User Adaptation' />
<param name= 'lm3ua' doc= 'libosmo-sigtran MTP3 User Adaptation' />
<param name= 'lmgcp' doc= 'libosmo-mgcp Media Gateway Control Protocol' />
2017-03-08 14:37:25 +00:00
<param name= 'everything' doc= 'Don't use. It doesn't log anything' />
2016-02-20 09:56:10 +00:00
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
2017-03-08 14:37:25 +00:00
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
2016-02-20 09:56:10 +00:00
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'show logging vty' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'logging' doc= 'Show current logging configuration' />
<param name= 'vty' doc= 'Show current logging configuration for this vty' />
</params>
</command>
<command id= 'show alarms' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'alarms' doc= 'Show current logging configuration' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'show stats' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
</params>
</command>
<command id= 'show stats level (global|peer|subscriber)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
<param name= 'level' doc= 'Set the maximum group level' />
<param name= 'global' doc= 'Show global groups only' />
<param name= 'peer' doc= 'Show global and network peer related groups' />
<param name= 'subscriber' doc= 'Show global, peer, and subscriber groups' />
</params>
</command>
<command id= 'show asciidoc counters' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'asciidoc' doc= 'Asciidoc generation' />
<param name= 'counters' doc= 'Generate table of all registered counters' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'show e1_driver' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'e1_driver' doc= 'Display information about available E1 drivers' />
</params>
</command>
<command id= 'show e1_line [line_nr] [stats]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'e1_line' doc= 'Display information about a E1 line' />
<param name= '[line_nr]' doc= 'E1 Line Number' />
<param name= '[stats]' doc= 'Include statistics' />
</params>
</command>
<command id= 'show e1_timeslot [line_nr] [ts_nr]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'e1_timeslot' doc= 'Display information about a E1 timeslot' />
<param name= '[line_nr]' doc= 'E1 Line Number' />
<param name= '[ts_nr]' doc= 'E1 Timeslot Number' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'show fsm NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'NAME' doc= 'Display information about a single named finite state machine' />
</params>
</command>
<command id= 'show fsm all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'all' doc= 'Display a list of all registered finite state machines' />
</params>
</command>
<command id= 'show fsm-instances NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'NAME' doc= 'Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id= 'show fsm-instances all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'all' doc= 'Display a list of all FSM instances of all finite state machine' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'show subscriber (extension|imsi|tmsi|id) ID' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
<command id= 'show subscriber cache' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Show information about subscribers' />
<param name= 'cache' doc= 'Display contents of subscriber cache' />
</params>
</command>
<command id= 'sms send pending' >
<params >
2017-03-08 14:37:25 +00:00
<param name= 'sms' doc= 'SMS related commands' />
2016-02-20 09:56:10 +00:00
<param name= 'send' doc= 'SMS Sending related commands' />
<param name= 'pending' doc= 'Send all pending SMS' />
</params>
</command>
<command id= 'subscriber create imsi ID' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'create' doc= 'Create new subscriber' />
<param name= 'imsi' doc= 'Identify the subscriber by his IMSI' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'sms' doc= 'SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'silent-sms' doc= 'Silent SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
2016-02-20 09:56:10 +00:00
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'start' doc= 'Start silent call' />
<param name= 'any' doc= 'Any channel' />
<param name= 'tch/f' doc= 'TCH/F channel' />
<param name= 'tch/any' doc= 'Any TCH channel' />
<param name= 'sdcch' doc= 'SDCCH channel' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID silent-call stop' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'stop' doc= 'Stop silent call' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ussd-notify' doc= 'Send a USSD notify to the subscriber' />
<param name= '0' doc= 'Alerting Level 0' />
<param name= '1' doc= 'Alerting Level 1' />
<param name= '2' doc= 'Alerting Level 2' />
<param name= '.TEXT' doc= 'Text of USSD message to send' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'close-loop' doc= 'Close a TCH Loop inside the MS' />
<param name= 'a' doc= 'Loop Type A' />
<param name= 'b' doc= 'Loop Type B' />
<param name= 'c' doc= 'Loop Type C' />
<param name= 'd' doc= 'Loop Type D' />
<param name= 'e' doc= 'Loop Type E' />
<param name= 'f' doc= 'Loop Type F' />
<param name= 'i' doc= 'Loop Type I' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID ms-test open-loop' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'open-loop' doc= 'Open a TCH Loop inside the MS' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID update' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'update' doc= 'Update the subscriber data from the dabase.' />
</params>
</command>
<command id= 'show statistics' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'statistics' doc= 'Display network statistics' />
</params>
</command>
<command id= 'show sms-queue' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'sms-queue' doc= 'Display SMSqueue statistics' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'logging filter imsi IMSI' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'imsi' doc= 'Filter log messages by IMSI' />
<param name= 'IMSI' doc= 'IMSI to be used as filter' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'show smpp esme' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'smpp' doc= 'SMPP Interface' />
<param name= 'esme' doc= 'SMPP Extrenal SMS Entity' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'Password_2' >
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= '_2' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'disable' >
<params >
<param name= 'disable' doc= 'Turn off privileged mode command' />
</params>
</command>
<command id= 'configure terminal' >
<params >
<param name= 'configure' doc= 'Configuration from vty interface' />
<param name= 'terminal' doc= 'Configuration terminal' />
</params>
</command>
<command id= 'copy running-config startup-config' >
<params >
<param name= 'copy' doc= 'Copy configuration' />
<param name= 'running-config' doc= 'Copy running config to... ' />
<param name= 'startup-config' doc= 'Copy running config to startup config (same as write file)' />
</params>
</command>
<command id= 'show startup-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'startup-config' doc= 'Contentes of startup configuration' />
</params>
</command>
<command id= 'show version' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'version' doc= 'Displays program version' />
</params>
</command>
<command id= 'show online-help' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'online-help' doc= 'Online help' />
</params>
</command>
<command id= 'terminal length <0-512>' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'length' doc= 'Set number of lines on a screen' />
<param name= '<0-512>' doc= 'Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id= 'terminal no length' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'length' doc= 'Set number of lines on a screen' />
</params>
</command>
<command id= 'echo .MESSAGE' >
<params >
<param name= 'echo' doc= 'Echo a message back to the vty' />
<param name= '.MESSAGE' doc= 'The message to echo' />
</params>
</command>
<command id= 'who' >
<params >
<param name= 'who' doc= 'Display who is on vty' />
</params>
</command>
<command id= 'show history' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'history' doc= 'Display the session command history' />
</params>
</command>
<command id= 'terminal monitor' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'monitor' doc= 'Copy debug output to the current terminal line' />
</params>
</command>
<command id= 'terminal no monitor' >
<params >
<param name= 'terminal' doc= 'Set terminal line parameters' />
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'monitor' doc= 'Copy debug output to the current terminal line' />
</params>
</command>
<command id= 'show network' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'network' doc= 'Display information about a GSM NETWORK' />
</params>
</command>
<command id= 'show bts [<0-255>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'bts' doc= 'Display information about a BTS' />
<param name= '[<0-255>]' doc= 'BTS number' />
</params>
</command>
<command id= 'show trx [<0-255>] [<0-255>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'trx' doc= 'Display information about a TRX' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
</params>
</command>
<command id= 'show timeslot [<0-255>] [<0-255>] [<0-7>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'timeslot' doc= 'Display information about a TS' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
<param name= '[<0-7>]' doc= 'Timeslot Number' />
</params>
</command>
<command id= 'show lchan [<0-255>] [<0-255>] [<0-7>] [lchan_nr]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'lchan' doc= 'Display information about a logical channel' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
<param name= '[<0-7>]' doc= 'Timeslot Number' />
<param name= '[lchan_nr]' doc= 'Logical Channel Number' />
</params>
</command>
<command id= 'show lchan summary [<0-255>] [<0-255>] [<0-7>] [lchan_nr]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'lchan' doc= 'Display information about a logical channel' />
<param name= 'summary' doc= 'Short summary' />
<param name= '[<0-255>]' doc= 'BTS Number' />
<param name= '[<0-255>]' doc= 'TRX Number' />
<param name= '[<0-7>]' doc= 'Timeslot Number' />
<param name= '[lchan_nr]' doc= 'Logical Channel Number' />
</params>
</command>
<command id= 'show paging [<0-255>]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'paging' doc= 'Display information about paging reuqests of a BTS' />
<param name= '[<0-255>]' doc= 'BTS Number' />
</params>
</command>
<command id= 'show paging-group <0-255> IMSI' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'paging-group' doc= 'Display the paging group' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'IMSI' doc= 'IMSI' />
</params>
</command>
<command id= 'logging enable' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'enable' doc= 'Enables logging to this vty' />
</params>
</command>
<command id= 'logging disable' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'disable' doc= 'Disables logging to this vty' />
</params>
</command>
<command id= 'logging filter all (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'all' doc= 'Do you want to log all messages?' />
<param name= '0' doc= 'Only print messages matched by other filters' />
<param name= '1' doc= 'Bypass filter and print all messages' />
</params>
</command>
<command id= 'logging color (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'color' doc= 'Configure color-printing for log messages' />
<param name= '0' doc= 'Don't use color for printing messages' />
<param name= '1' doc= 'Use color for printing messages' />
</params>
</command>
<command id= 'logging timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'logging print extended-timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'extended-timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id= 'logging print category (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem name' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'logging set-log-mask MASK' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'set-log-mask' doc= 'Set the logmask of this logging target' />
<param name= 'MASK' doc= 'The logmask to use' />
</params>
</command>
<command id= 'logging set log mask MASK' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'set' doc= 'Decide which categories to output.' />
<param name= 'log' doc= 'Log commands' />
<param name= 'mask' doc= 'Mask commands' />
<param name= 'MASK' doc= 'The logmask to use' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'all' doc= 'Global setting for all subsystems' />
<param name= 'rll' doc= 'A-bis Radio Link Layer (RLL)' />
<param name= 'cc' doc= 'Layer3 Call Control (CC)' />
<param name= 'mm' doc= 'Layer3 Mobility Management (MM)' />
<param name= 'rr' doc= 'Layer3 Radio Resource (RR)' />
<param name= 'rsl' doc= 'A-bis Radio Siganlling Link (RSL)' />
<param name= 'nm' doc= 'A-bis Network Management / O&M (NM/OML)' />
<param name= 'mncc' doc= 'MNCC API for Call Control application' />
<param name= 'pag' doc= 'Paging Subsystem' />
<param name= 'meas' doc= 'Radio Measurement Processing' />
<param name= 'sccp' doc= 'SCCP Protocol' />
<param name= 'msc' doc= 'Mobile Switching Center' />
<param name= 'mgcp' doc= 'Media Gateway Control Protocol' />
<param name= 'ho' doc= 'Hand-Over' />
<param name= 'db' doc= 'Database Layer' />
<param name= 'ref' doc= 'Reference Counting' />
<param name= 'gprs' doc= 'GPRS Packet Service' />
<param name= 'ns' doc= 'GPRS Network Service (NS)' />
<param name= 'bssgp' doc= 'GPRS BSS Gateway Protocol (BSSGP)' />
<param name= 'llc' doc= 'GPRS Logical Link Control Protocol (LLC)' />
<param name= 'sndcp' doc= 'GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
<param name= 'nat' doc= 'GSM 08.08 NAT/Multiplexer' />
<param name= 'ctrl' doc= 'Control interface' />
<param name= 'smpp' doc= 'SMPP interface for external SMS apps' />
2017-03-08 14:37:25 +00:00
<param name= 'filter' doc= 'BSC/NAT IMSI based filtering' />
<param name= 'ranap' doc= 'Radio Access Network Application Part Protocol' />
<param name= 'sua' doc= 'SCCP User Adaptation Protocol' />
2017-09-18 16:32:30 +00:00
<param name= 'pcu' doc= 'PCU Interface' />
2016-02-20 09:56:10 +00:00
<param name= 'lglobal' doc= 'Library-internal global log family' />
<param name= 'llapd' doc= 'LAPD in libosmogsm' />
<param name= 'linp' doc= 'A-bis Intput Subsystem' />
<param name= 'lmux' doc= 'A-bis B-Subchannel TRAU Frame Multiplex' />
<param name= 'lmi' doc= 'A-bis Input Driver for Signalling' />
<param name= 'lmib' doc= 'A-bis Input Driver for B-Channels (voice)' />
<param name= 'lsms' doc= 'Layer3 Short Message Service (SMS)' />
2017-03-08 14:37:25 +00:00
<param name= 'lctrl' doc= 'Control Interface' />
<param name= 'lgtp' doc= 'GPRS GTP library' />
<param name= 'lstats' doc= 'Statistics messages and logging' />
2017-09-18 16:32:30 +00:00
<param name= 'lgsup' doc= 'Generic Subscriber Update Protocol' />
<param name= 'loap' doc= 'Osmocom Authentication Protocol' />
<param name= 'lss7' doc= 'libosmo-sigtran Signalling System 7' />
<param name= 'lsccp' doc= 'libosmo-sigtran SCCP Implementation' />
<param name= 'lsua' doc= 'libosmo-sigtran SCCP User Adaptation' />
<param name= 'lm3ua' doc= 'libosmo-sigtran MTP3 User Adaptation' />
<param name= 'lmgcp' doc= 'libosmo-mgcp Media Gateway Control Protocol' />
2017-03-08 14:37:25 +00:00
<param name= 'everything' doc= 'Don't use. It doesn't log anything' />
2016-02-20 09:56:10 +00:00
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
2017-03-08 14:37:25 +00:00
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
2016-02-20 09:56:10 +00:00
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'show logging vty' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'logging' doc= 'Show current logging configuration' />
<param name= 'vty' doc= 'Show current logging configuration for this vty' />
</params>
</command>
<command id= 'show alarms' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'alarms' doc= 'Show current logging configuration' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'show stats' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
</params>
</command>
<command id= 'show stats level (global|peer|subscriber)' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'stats' doc= 'Show statistical values' />
<param name= 'level' doc= 'Set the maximum group level' />
<param name= 'global' doc= 'Show global groups only' />
<param name= 'peer' doc= 'Show global and network peer related groups' />
<param name= 'subscriber' doc= 'Show global, peer, and subscriber groups' />
</params>
</command>
<command id= 'show asciidoc counters' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'asciidoc' doc= 'Asciidoc generation' />
<param name= 'counters' doc= 'Generate table of all registered counters' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'drop bts connection <0-65535> (oml|rsl)' >
<params >
<param name= 'drop' doc= 'Debug/Simulation command to drop Abis/IP BTS' />
<param name= 'bts' doc= 'Debug/Simulation command to drop Abis/IP BTS' />
<param name= 'connection' doc= 'Debug/Simulation command to drop Abis/IP BTS' />
<param name= '<0-65535>' doc= 'BTS NR' />
<param name= 'oml' doc= 'Drop OML Connection' />
<param name= 'rsl' doc= 'Drop RSL Connection' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'restart-bts <0-65535>' >
<params >
<param name= 'restart-bts' doc= 'Restart ip.access nanoBTS through OML' />
<param name= '<0-65535>' doc= 'BTS Number' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'bts <0-255> resend-system-information' >
<params >
<param name= 'bts' doc= 'BTS Specific Commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'resend-system-information' doc= 'Re-generate + re-send BCCH SYSTEM INFORMATION' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'bts <0-255> trx <0-255> timeslot <0-7> pdch (activate|deactivate)' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'trx' doc= 'Transceiver' />
<param name= '<0-255>' doc= 'Transceiver Number' />
<param name= 'timeslot' doc= 'TRX Timeslot' />
<param name= '<0-7>' doc= 'Timeslot Number' />
<param name= 'pdch' doc= 'Packet Data Channel' />
<param name= 'activate' doc= 'Activate Dynamic PDCH/TCH (-> PDCH mode)' />
<param name= 'deactivate' doc= 'Deactivate Dynamic PDCH/TCH (-> TCH mode)' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> (activate|deactivate) (hr|fr|efr|amr) [<0-7>]' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'trx' doc= 'Transceiver' />
<param name= '<0-255>' doc= 'Transceiver Number' />
<param name= 'timeslot' doc= 'TRX Timeslot' />
<param name= '<0-7>' doc= 'Timeslot Number' />
<param name= 'sub-slot' doc= 'Sub-Slot Number' />
<param name= '<0-7>' doc= 'Sub-Slot Number' />
<param name= 'activate' doc= 'Manual Channel Activation (e.g. for BER test)' />
<param name= 'deactivate' doc= 'Manual Channel Deactivation (e.g. for BER test)' />
<param name= 'hr' doc= 'Half-Rate v1' />
<param name= 'fr' doc= 'Full-Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multi-Rate' />
<param name= '[<0-7>]' doc= 'AMR Mode' />
</params>
</command>
<command id= 'bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> mdcx A.B.C.D <0-65535>' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'trx' doc= 'Transceiver' />
<param name= '<0-255>' doc= 'Transceiver Number' />
<param name= 'timeslot' doc= 'TRX Timeslot' />
<param name= '<0-7>' doc= 'Timeslot Number' />
<param name= 'sub-slot' doc= 'Sub-Slot' />
<param name= '<0-7>' doc= 'Sub-Slot Number' />
<param name= 'mdcx' doc= 'Modify RTP Connection' />
<param name= 'A.B.C.D' doc= 'MGW IP Address' />
<param name= '<0-65535>' doc= 'MGW UDP Port' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'bts <0-255> smscb-command <1-4> HEXSTRING' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'smscb-command' doc= 'SMS Cell Broadcast' />
<param name= '<1-4>' doc= 'Last Valid Block' />
<param name= 'HEXSTRING' doc= 'Hex Encoded SMSCB message (up to 88 octets)' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'ctrl-interface generate-trap TRAP VALUE' >
<params >
<param name= 'ctrl-interface' doc= 'Commands related to the CTRL Interface' />
<param name= 'generate-trap' doc= 'Generate a TRAP for test purpose' />
<param name= 'TRAP' doc= 'Identity/Name of the TRAP variable' />
<param name= 'VALUE' doc= 'Value of the TRAP variable' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'bts <0-255> oml class (site-manager|bts|radio-carrier|baseband-transceiver|channel|adjc|handover|power-contorl|btse|rack|test|envabtse|bport|gprs-nse|gprs-cell|gprs-nsvc|siemenshw) instance <0-255> <0-255> <0-255>' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'oml' doc= 'Manipulate the OML managed objects' />
<param name= 'class' doc= 'Object Class' />
<param name= 'site-manager' doc= 'Site Manager Object' />
<param name= 'bts' doc= 'BTS Object' />
<param name= 'radio-carrier' doc= 'Radio Carrier Object' />
<param name= 'baseband-transceiver' doc= 'Baseband Transceiver Object' />
<param name= 'channel' doc= 'Channel (Timeslot) Object' />
<param name= 'adjc' doc= 'Adjacent Object (Siemens)' />
<param name= 'handover' doc= 'Handover Object (Siemens)' />
<param name= 'power-contorl' doc= 'Power Control Object (Siemens)' />
<param name= 'btse' doc= 'BTSE Object (Siemens)' />
<param name= 'rack' doc= 'Rack Object (Siemens)' />
<param name= 'test' doc= 'Test Object (Siemens)' />
<param name= 'envabtse' doc= 'ENVABTSE Object (Siemens)' />
<param name= 'bport' doc= 'BPORT Object (Siemens)' />
<param name= 'gprs-nse' doc= 'GPRS NSE Object (ip.access/osmo-bts)' />
<param name= 'gprs-cell' doc= 'GPRS Cell Object (ip.acecss/osmo-bts)' />
<param name= 'gprs-nsvc' doc= 'GPRS NSVC Object (ip.acecss/osmo-bts)' />
<param name= 'siemenshw' doc= 'SIEMENSHW Object (Siemens)' />
<param name= 'instance' doc= 'Object Instance' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= '<0-255>' doc= 'TRX Number' />
<param name= '<0-255>' doc= 'TS Number' />
</params>
</command>
<command id= 'bts <0-255> oml class <0-255> instance <0-255> <0-255> <0-255>' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'oml' doc= 'Manipulate the OML managed objects' />
<param name= 'class' doc= 'Object Class' />
<param name= '<0-255>' doc= 'Object Class' />
<param name= 'instance' doc= 'Object Instance' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= '<0-255>' doc= 'TRX Number' />
<param name= '<0-255>' doc= 'TS Number' />
</params>
</command>
<command id= 'bts <0-255> om2000 class (trxc|ts|tf|is|con|dp|cf|tx|rx) <0-255> <0-255> <0-255>' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'om2000' doc= 'Manipulate the OM2000 managed objects' />
<param name= 'class' doc= 'Object Class' />
<param name= 'trxc' doc= 'TRX Controller' />
<param name= 'ts' doc= 'Timeslot' />
<param name= 'tf' doc= 'Timing Function' />
<param name= 'is' doc= 'Interface Switch' />
<param name= 'con' doc= 'Abis Concentrator' />
<param name= 'dp' doc= 'Digital Path' />
<param name= 'cf' doc= 'Central Function' />
<param name= 'tx' doc= 'Transmitter' />
<param name= 'rx' doc= 'Receiver' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= '<0-255>' doc= 'Associated SO Instance' />
<param name= '<0-255>' doc= 'Instance Number' />
</params>
</command>
<command id= 'bts <0-255> om2000 class <0-255> <0-255> <0-255> <0-255>' >
<params >
<param name= 'bts' doc= 'BTS related commands' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= 'om2000' doc= 'Manipulate the OML managed objects' />
<param name= 'class' doc= 'Object Class' />
<param name= '<0-255>' doc= 'Object Class' />
<param name= '<0-255>' doc= 'BTS Number' />
<param name= '<0-255>' doc= 'Associated SO Instance' />
<param name= '<0-255>' doc= 'Instance Number' />
</params>
</command>
<command id= 'show e1_driver' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'e1_driver' doc= 'Display information about available E1 drivers' />
</params>
</command>
<command id= 'show e1_line [line_nr] [stats]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'e1_line' doc= 'Display information about a E1 line' />
<param name= '[line_nr]' doc= 'E1 Line Number' />
<param name= '[stats]' doc= 'Include statistics' />
</params>
</command>
<command id= 'show e1_timeslot [line_nr] [ts_nr]' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'e1_timeslot' doc= 'Display information about a E1 timeslot' />
<param name= '[line_nr]' doc= 'E1 Line Number' />
<param name= '[ts_nr]' doc= 'E1 Timeslot Number' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'show fsm NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'NAME' doc= 'Display information about a single named finite state machine' />
</params>
</command>
<command id= 'show fsm all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm' doc= 'Show information about finite state machines' />
<param name= 'all' doc= 'Display a list of all registered finite state machines' />
</params>
</command>
<command id= 'show fsm-instances NAME' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'NAME' doc= 'Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id= 'show fsm-instances all' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'fsm-instances' doc= 'Show information about finite state machine instances' />
<param name= 'all' doc= 'Display a list of all FSM instances of all finite state machine' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'show subscriber (extension|imsi|tmsi|id) ID' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
<command id= 'show subscriber cache' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'subscriber' doc= 'Show information about subscribers' />
<param name= 'cache' doc= 'Display contents of subscriber cache' />
</params>
</command>
<command id= 'sms send pending' >
<params >
2017-03-08 14:37:25 +00:00
<param name= 'sms' doc= 'SMS related commands' />
2016-02-20 09:56:10 +00:00
<param name= 'send' doc= 'SMS Sending related commands' />
<param name= 'pending' doc= 'Send all pending SMS' />
</params>
</command>
<command id= 'subscriber create imsi ID' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'create' doc= 'Create new subscriber' />
<param name= 'imsi' doc= 'Identify the subscriber by his IMSI' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'sms' doc= 'SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'silent-sms' doc= 'Silent SMS Operations' />
<param name= 'sender' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'SENDER_ID' doc= 'Identifier for the subscriber' />
<param name= 'send' doc= 'Send SMS' />
<param name= '.LINE' doc= 'Actual SMS Text' />
2016-02-20 09:56:10 +00:00
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'start' doc= 'Start silent call' />
<param name= 'any' doc= 'Any channel' />
<param name= 'tch/f' doc= 'TCH/F channel' />
<param name= 'tch/any' doc= 'Any TCH channel' />
<param name= 'sdcch' doc= 'SDCCH channel' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID silent-call stop' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'silent-call' doc= 'Silent call operation' />
<param name= 'stop' doc= 'Stop silent call' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ussd-notify' doc= 'Send a USSD notify to the subscriber' />
<param name= '0' doc= 'Alerting Level 0' />
<param name= '1' doc= 'Alerting Level 1' />
<param name= '2' doc= 'Alerting Level 2' />
<param name= '.TEXT' doc= 'Text of USSD message to send' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'close-loop' doc= 'Close a TCH Loop inside the MS' />
<param name= 'a' doc= 'Loop Type A' />
<param name= 'b' doc= 'Loop Type B' />
<param name= 'c' doc= 'Loop Type C' />
<param name= 'd' doc= 'Loop Type D' />
<param name= 'e' doc= 'Loop Type E' />
<param name= 'f' doc= 'Loop Type F' />
<param name= 'i' doc= 'Loop Type I' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID ms-test open-loop' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'ms-test' doc= 'Send a TS 04.14 MS Test Command to subscriber' />
<param name= 'open-loop' doc= 'Open a TCH Loop inside the MS' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID update' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'update' doc= 'Update the subscriber data from the dabase.' />
</params>
</command>
<command id= 'show statistics' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'statistics' doc= 'Display network statistics' />
</params>
</command>
<command id= 'show sms-queue' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'sms-queue' doc= 'Display SMSqueue statistics' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'logging filter imsi IMSI' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'imsi' doc= 'Filter log messages by IMSI' />
<param name= 'IMSI' doc= 'IMSI to be used as filter' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID delete' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'delete' doc= 'Delete subscriber in HLR' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID expire' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'expire' doc= 'Expire the subscriber Now' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'subscriber (extension|imsi|tmsi|id) ID name .NAME' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'name' doc= 'Set the name of the subscriber' />
<param name= '.NAME' doc= 'Name of the Subscriber' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID extension EXTENSION' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'extension' doc= 'Set the extension (phone number) of the subscriber' />
<param name= 'EXTENSION' doc= 'Extension (phone number)' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID authorized (0|1)' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'authorized' doc= '(De-)Authorize subscriber in HLR' />
<param name= '0' doc= 'Subscriber should NOT be authorized' />
<param name= '1' doc= 'Subscriber should be authorized' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID a3a8 (none|xor|comp128v1) [KI]' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'a3a8' doc= 'Set a3a8 parameters for the subscriber' />
<param name= 'none' doc= 'Use No A3A8 algorithm' />
<param name= 'xor' doc= 'Use XOR algorithm' />
<param name= 'comp128v1' doc= 'Use COMP128v1 algorithm' />
<param name= '[KI]' doc= 'Encryption Key Ki' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID handover BTS_NR' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'handover' doc= 'Handover the active connection' />
<param name= 'BTS_NR' doc= 'Number of the BTS to handover to' />
</params>
</command>
<command id= 'subscriber purge-inactive' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
<param name= 'purge-inactive' doc= 'Purge subscribers with a zero use count.' />
</params>
</command>
<command id= 'sms-queue trigger' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'trigger' doc= 'Trigger sending messages' />
</params>
</command>
<command id= 'sms-queue max-pending <1-500>' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'max-pending' doc= 'SMS to deliver in parallel' />
<param name= '<1-500>' doc= 'Amount' />
</params>
</command>
<command id= 'sms-queue clear' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'clear' doc= 'Clear the queue of pending SMS' />
</params>
</command>
<command id= 'sms-queue max-failure <1-500>' >
<params >
<param name= 'sms-queue' doc= 'SMS Queue' />
<param name= 'max-failure' doc= 'Maximum amount of delivery failures' />
<param name= '<1-500>' doc= 'Amount' />
</params>
</command>
<command id= 'subscriber (extension|imsi|tmsi|id) ID sms pending-send' >
<params >
<param name= 'subscriber' doc= 'Operations on a Subscriber' />
2017-03-08 14:37:25 +00:00
<param name= 'extension' doc= 'Identify subscriber by extension (phone number)' />
<param name= 'imsi' doc= 'Identify subscriber by IMSI' />
<param name= 'tmsi' doc= 'Identify subscriber by TMSI' />
<param name= 'id' doc= 'Identify subscriber by database ID' />
2016-02-20 09:56:10 +00:00
<param name= 'ID' doc= 'Identifier for the subscriber' />
<param name= 'sms' doc= 'SMS Operations' />
<param name= 'pending-send' doc= 'Send pending SMS' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'meas-feed scenario NAME' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'meas-feed' doc= 'Measurement export related' />
<param name= 'scenario' doc= 'scenario' />
<param name= 'NAME' doc= 'Name up to 31 characters included in report' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'show smpp esme' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'smpp' doc= 'SMPP Interface' />
<param name= 'esme' doc= 'SMPP Extrenal SMS Entity' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'hostname WORD' >
<params >
<param name= 'hostname' doc= 'Set system's network name' />
<param name= 'WORD' doc= 'This system's network name' />
</params>
</command>
<command id= 'no hostname [HOSTNAME]' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'hostname' doc= 'Reset system's network name' />
<param name= '[HOSTNAME]' doc= 'Host name of this router' />
</params>
</command>
<command id= 'password (8|) WORD' >
<params >
<param name= 'password' doc= 'Assign the terminal connection password' />
<param name= '8' doc= 'Specifies a HIDDEN password will follow' />
<param name= '' doc= 'dummy string ' />
<param name= 'WORD' doc= 'The HIDDEN line password string' />
</params>
</command>
<command id= 'password LINE' >
<params >
<param name= 'password' doc= 'Assign the terminal connection password' />
<param name= 'LINE' doc= 'The UNENCRYPTED (cleartext) line password' />
</params>
</command>
<command id= 'enable password (8|) WORD' >
<params >
<param name= 'enable' doc= 'Modify enable password parameters' />
<param name= 'password' doc= 'Assign the privileged level password' />
<param name= '8' doc= 'Specifies a HIDDEN password will follow' />
<param name= '' doc= 'dummy string ' />
<param name= 'WORD' doc= 'The HIDDEN 'enable' password string' />
</params>
</command>
<command id= 'enable password LINE' >
<params >
<param name= 'enable' doc= 'Modify enable password parameters' />
<param name= 'password' doc= 'Assign the privileged level password' />
<param name= 'LINE' doc= 'The UNENCRYPTED (cleartext) 'enable' password' />
</params>
</command>
<command id= 'no enable password' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'enable' doc= 'Modify enable password parameters' />
<param name= 'password' doc= 'Assign the privileged level password' />
</params>
</command>
<command id= 'banner motd default' >
<params >
<param name= 'banner' doc= 'Set banner string' />
<param name= 'motd' doc= 'Strings for motd' />
<param name= 'default' doc= 'Default string' />
</params>
</command>
<command id= 'banner motd file [FILE]' >
<params >
<param name= 'banner' doc= 'Set banner' />
<param name= 'motd' doc= 'Banner for motd' />
<param name= 'file' doc= 'Banner from a file' />
<param name= '[FILE]' doc= 'Filename' />
</params>
</command>
<command id= 'no banner motd' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'banner' doc= 'Set banner string' />
<param name= 'motd' doc= 'Strings for motd' />
</params>
</command>
<command id= 'service terminal-length <0-512>' >
<params >
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'terminal-length' doc= 'System wide terminal length configuration' />
<param name= '<0-512>' doc= 'Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id= 'no service terminal-length [<0-512>]' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'terminal-length' doc= 'System wide terminal length configuration' />
<param name= '[<0-512>]' doc= 'Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id= 'line vty' >
<params >
<param name= 'line' doc= 'Configure a terminal line' />
<param name= 'vty' doc= 'Virtual terminal' />
</params>
</command>
<command id= 'service advanced-vty' >
<params >
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'advanced-vty' doc= 'Enable advanced mode vty interface' />
</params>
</command>
<command id= 'no service advanced-vty' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'service' doc= 'Set up miscellaneous service' />
<param name= 'advanced-vty' doc= 'Enable advanced mode vty interface' />
</params>
</command>
<command id= 'show history' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'history' doc= 'Display the session command history' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'network' >
<params >
<param name= 'network' doc= 'Configure the GSM network' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'log stderr' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'stderr' doc= 'Logging via STDERR of the process' />
</params>
</command>
<command id= 'no log stderr' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'stderr' doc= 'Logging via STDERR of the process' />
</params>
</command>
<command id= 'log file .FILENAME' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'file' doc= 'Logging to text file' />
<param name= '.FILENAME' doc= 'Filename' />
</params>
</command>
<command id= 'no log file .FILENAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'file' doc= 'Logging to text file' />
<param name= '.FILENAME' doc= 'Filename' />
</params>
</command>
<command id= 'log alarms <2-32700>' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'alarms' doc= 'Logging alarms to osmo_strrb' />
<param name= '<2-32700>' doc= 'Maximum number of messages to log' />
</params>
</command>
<command id= 'no log alarms' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'alarms' doc= 'Logging alarms to osmo_strrb' />
</params>
</command>
<command id= 'log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'syslog' doc= 'Logging via syslog' />
<param name= 'authpriv' doc= 'Security/authorization messages facility' />
<param name= 'cron' doc= 'Clock daemon (cron/at) facility' />
<param name= 'daemon' doc= 'General system daemon facility' />
<param name= 'ftp' doc= 'Ftp daemon facility' />
<param name= 'lpr' doc= 'Line printer facility' />
<param name= 'mail' doc= 'Mail facility' />
<param name= 'news' doc= 'News facility' />
<param name= 'user' doc= 'Generic facility' />
<param name= 'uucp' doc= 'UUCP facility' />
</params>
</command>
<command id= 'log syslog local <0-7>' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'syslog' doc= 'Logging via syslog' />
<param name= 'local' doc= 'Syslog LOCAL facility' />
<param name= '<0-7>' doc= 'Local facility number' />
</params>
</command>
<command id= 'no log syslog' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'syslog' doc= 'Logging via syslog' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'log gsmtap [HOSTNAME]' >
<params >
<param name= 'log' doc= 'Configure logging sub-system' />
<param name= 'gsmtap' doc= 'Logging via GSMTAP' />
<param name= '[HOSTNAME]' doc= 'Host name to send the GSMTAP logging to (UDP port 4729)' />
</params>
</command>
<command id= 'stats reporter statsd' >
<params >
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'statsd' doc= 'Report to a STATSD server' />
</params>
</command>
<command id= 'no stats reporter statsd' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'statsd' doc= 'Report to a STATSD server' />
</params>
</command>
<command id= 'stats reporter log' >
<params >
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'log' doc= 'Report to the logger' />
</params>
</command>
<command id= 'no stats reporter log' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'reporter' doc= 'Configure a stats reporter' />
<param name= 'log' doc= 'Report to the logger' />
</params>
</command>
<command id= 'stats interval <1-65535>' >
<params >
<param name= 'stats' doc= 'Configure stats sub-system' />
<param name= 'interval' doc= 'Set the reporting interval' />
<param name= '<1-65535>' doc= 'Interval in seconds' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'e1_input' >
<params >
<param name= 'e1_input' doc= 'Configure E1/T1/J1 TDM input' />
</params>
</command>
<command id= 'mncc-int' >
<params >
<param name= 'mncc-int' doc= 'Configure internal MNCC handler' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'nitb' >
<params >
<param name= 'nitb' doc= 'Configure NITB options' />
</params>
</command>
<command id= 'ctrl' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'ctrl' doc= 'Configure the Control Interface' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'smpp' >
<params >
<param name= 'smpp' doc= 'Configure SMPP SMS Interface' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-log' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'logging filter all (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'all' doc= 'Do you want to log all messages?' />
<param name= '0' doc= 'Only print messages matched by other filters' />
<param name= '1' doc= 'Bypass filter and print all messages' />
</params>
</command>
<command id= 'logging color (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'color' doc= 'Configure color-printing for log messages' />
<param name= '0' doc= 'Don't use color for printing messages' />
<param name= '1' doc= 'Use color for printing messages' />
</params>
</command>
<command id= 'logging timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'logging print extended-timestamp (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'extended-timestamp' doc= 'Configure log message timestamping' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id= 'logging print category (0|1)' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'print' doc= 'Log output settings' />
<param name= 'category' doc= 'Configure log message' />
<param name= '0' doc= 'Don't prefix each log message' />
<param name= '1' doc= 'Prefix each log message with category/subsystem name' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'level' doc= 'Set the log level for a specified category' />
<param name= 'all' doc= 'Global setting for all subsystems' />
<param name= 'rll' doc= 'A-bis Radio Link Layer (RLL)' />
<param name= 'cc' doc= 'Layer3 Call Control (CC)' />
<param name= 'mm' doc= 'Layer3 Mobility Management (MM)' />
<param name= 'rr' doc= 'Layer3 Radio Resource (RR)' />
<param name= 'rsl' doc= 'A-bis Radio Siganlling Link (RSL)' />
<param name= 'nm' doc= 'A-bis Network Management / O&M (NM/OML)' />
<param name= 'mncc' doc= 'MNCC API for Call Control application' />
<param name= 'pag' doc= 'Paging Subsystem' />
<param name= 'meas' doc= 'Radio Measurement Processing' />
<param name= 'sccp' doc= 'SCCP Protocol' />
<param name= 'msc' doc= 'Mobile Switching Center' />
<param name= 'mgcp' doc= 'Media Gateway Control Protocol' />
<param name= 'ho' doc= 'Hand-Over' />
<param name= 'db' doc= 'Database Layer' />
<param name= 'ref' doc= 'Reference Counting' />
<param name= 'gprs' doc= 'GPRS Packet Service' />
<param name= 'ns' doc= 'GPRS Network Service (NS)' />
<param name= 'bssgp' doc= 'GPRS BSS Gateway Protocol (BSSGP)' />
<param name= 'llc' doc= 'GPRS Logical Link Control Protocol (LLC)' />
<param name= 'sndcp' doc= 'GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
<param name= 'nat' doc= 'GSM 08.08 NAT/Multiplexer' />
<param name= 'ctrl' doc= 'Control interface' />
<param name= 'smpp' doc= 'SMPP interface for external SMS apps' />
2017-03-08 14:37:25 +00:00
<param name= 'filter' doc= 'BSC/NAT IMSI based filtering' />
<param name= 'ranap' doc= 'Radio Access Network Application Part Protocol' />
<param name= 'sua' doc= 'SCCP User Adaptation Protocol' />
2017-09-18 16:32:30 +00:00
<param name= 'pcu' doc= 'PCU Interface' />
2016-02-20 09:56:10 +00:00
<param name= 'lglobal' doc= 'Library-internal global log family' />
<param name= 'llapd' doc= 'LAPD in libosmogsm' />
<param name= 'linp' doc= 'A-bis Intput Subsystem' />
<param name= 'lmux' doc= 'A-bis B-Subchannel TRAU Frame Multiplex' />
<param name= 'lmi' doc= 'A-bis Input Driver for Signalling' />
<param name= 'lmib' doc= 'A-bis Input Driver for B-Channels (voice)' />
<param name= 'lsms' doc= 'Layer3 Short Message Service (SMS)' />
2017-03-08 14:37:25 +00:00
<param name= 'lctrl' doc= 'Control Interface' />
<param name= 'lgtp' doc= 'GPRS GTP library' />
<param name= 'lstats' doc= 'Statistics messages and logging' />
2017-09-18 16:32:30 +00:00
<param name= 'lgsup' doc= 'Generic Subscriber Update Protocol' />
<param name= 'loap' doc= 'Osmocom Authentication Protocol' />
<param name= 'lss7' doc= 'libosmo-sigtran Signalling System 7' />
<param name= 'lsccp' doc= 'libosmo-sigtran SCCP Implementation' />
<param name= 'lsua' doc= 'libosmo-sigtran SCCP User Adaptation' />
<param name= 'lm3ua' doc= 'libosmo-sigtran MTP3 User Adaptation' />
<param name= 'lmgcp' doc= 'libosmo-mgcp Media Gateway Control Protocol' />
2017-03-08 14:37:25 +00:00
<param name= 'everything' doc= 'Don't use. It doesn't log anything' />
2016-02-20 09:56:10 +00:00
<param name= 'debug' doc= 'Log debug messages and higher levels' />
<param name= 'info' doc= 'Log informational messages and higher levels' />
2017-03-08 14:37:25 +00:00
<param name= 'notice' doc= 'Log noticeable messages and higher levels' />
2016-02-20 09:56:10 +00:00
<param name= 'error' doc= 'Log error messages and higher levels' />
<param name= 'fatal' doc= 'Log only fatal messages' />
</params>
</command>
<command id= 'logging level sms (everything|debug|info|notice|error|fatal)' >
<params >
<param name= 'logging' doc= '.HIDDEN' />
<param name= 'level' doc= 'Obsolete' />
<param name= 'sms' doc= 'Obsolete' />
<param name= 'everything' doc= 'Obsolete' />
<param name= 'debug' doc= 'Obsolete' />
<param name= 'info' doc= 'Obsolete' />
<param name= 'notice' doc= 'Obsolete' />
<param name= 'error' doc= 'Obsolete' />
<param name= 'fatal' doc= 'Obsolete' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'logging filter imsi IMSI' >
<params >
<param name= 'logging' doc= 'Configure log message to this terminal' />
<param name= 'filter' doc= 'Filter log messages' />
<param name= 'imsi' doc= 'Filter log messages by IMSI' />
<param name= 'IMSI' doc= 'IMSI to be used as filter' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-stats' >
2017-03-08 14:37:25 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'local-ip ADDR' >
<params >
<param name= 'local-ip' doc= 'Set the IP address to which we bind locally' />
<param name= 'ADDR' doc= 'IP Address' />
</params>
</command>
<command id= 'no local-ip' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'local-ip' doc= 'Set the IP address to which we bind locally' />
</params>
</command>
<command id= 'remote-ip ADDR' >
<params >
<param name= 'remote-ip' doc= 'Set the remote IP address to which we connect' />
<param name= 'ADDR' doc= 'IP Address' />
</params>
</command>
<command id= 'remote-port <1-65535>' >
<params >
<param name= 'remote-port' doc= 'Set the remote port to which we connect' />
<param name= '<1-65535>' doc= 'Remote port number' />
</params>
</command>
<command id= 'mtu <100-65535>' >
<params >
<param name= 'mtu' doc= 'Set the maximum packet size' />
<param name= '<100-65535>' doc= 'Size in byte' />
</params>
</command>
<command id= 'no mtu' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'mtu' doc= 'Set the maximum packet size' />
</params>
</command>
<command id= 'prefix PREFIX' >
<params >
<param name= 'prefix' doc= 'Set the item name prefix' />
<param name= 'PREFIX' doc= 'The prefix string' />
</params>
</command>
<command id= 'no prefix' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'prefix' doc= 'Set the item name prefix' />
</params>
</command>
<command id= 'level (global|peer|subscriber)' >
<params >
<param name= 'level' doc= 'Set the maximum group level' />
<param name= 'global' doc= 'Report global groups only' />
<param name= 'peer' doc= 'Report global and network peer related groups' />
<param name= 'subscriber' doc= 'Report global, peer, and subscriber groups' />
</params>
</command>
<command id= 'enable' >
<params >
<param name= 'enable' doc= 'Enable the reporter' />
</params>
</command>
<command id= 'disable' >
<params >
<param name= 'disable' doc= 'Disable the reporter' />
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-line' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'login' >
<params >
<param name= 'login' doc= 'Enable password checking' />
</params>
</command>
<command id= 'no login' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'login' doc= 'Enable password checking' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'bind A.B.C.D' >
<params >
<param name= 'bind' doc= 'Accept VTY telnet connections on local interface' />
<param name= 'A.B.C.D' doc= 'Local interface IP address (default: 127.0.0.1)' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-e1_input' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'e1_line <0-255> driver (misdn|misdn_lapd|dahdi|ipa|unixsocket)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'driver' doc= 'Set driver for this line' />
<param name= 'misdn' doc= 'mISDN supported E1 Card (kernel LAPD)' />
<param name= 'misdn_lapd' doc= 'mISDN supported E1 Card (userspace LAPD)' />
<param name= 'dahdi' doc= 'DAHDI supported E1/T1/J1 Card' />
<param name= 'ipa' doc= 'IPA TCP/IP input' />
2017-09-18 16:32:30 +00:00
<param name= 'unixsocket' doc= 'HSL TCP/IP input' />
2016-02-20 09:56:10 +00:00
</params>
</command>
<command id= 'e1_line <0-255> port <0-255>' >
<params >
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'port' doc= 'Set physical port/span/card number' />
<param name= '<0-255>' doc= 'E1/T1 Port/Span/Card number' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'e1_line <0-255> socket .SOCKET' >
<params >
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'socket' doc= 'Set socket path for unixsocket' />
<param name= '.SOCKET' doc= 'socket path' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'e1_line <0-255> name .LINE' >
<params >
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'name' doc= 'Set name for this line' />
<param name= '.LINE' doc= 'Human readable name' />
</params>
</command>
<command id= 'e1_line <0-255> keepalive' >
<params >
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'keepalive' doc= 'Enable keep-alive probing' />
</params>
</command>
<command id= 'e1_line <0-255> keepalive <1-300> <1-20> <1-300>' >
<params >
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'keepalive' doc= 'Enable keep-alive probing' />
<param name= '<1-300>' doc= 'Idle interval in seconds before probes are sent' />
<param name= '<1-20>' doc= 'Number of probes to sent' />
<param name= '<1-300>' doc= 'Delay between probe packets in seconds' />
</params>
</command>
<command id= 'no e1_line <0-255> keepalive' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'e1_line' doc= 'Configure E1/T1/J1 Line' />
<param name= '<0-255>' doc= 'Line Number' />
<param name= 'keepalive' doc= 'Enable keep-alive probing' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'ipa bind A.B.C.D' >
<params >
<param name= 'ipa' doc= 'ipa driver config' />
<param name= 'bind' doc= 'Set ipa local bind address' />
<param name= 'A.B.C.D' doc= 'Listen on this IP address (default 0.0.0.0)' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-ctrl' >
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'bind A.B.C.D' >
<params >
<param name= 'bind' doc= 'Set bind address to listen for Control connections' />
<param name= 'A.B.C.D' doc= 'Local IP address (default 127.0.0.1)' />
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-net' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'network country code <1-999>' >
<params >
<param name= 'network' doc= 'Set the GSM network country code' />
<param name= 'country' doc= 'Country commands' />
<param name= 'code' doc= 'Code commands' />
<param name= '<1-999>' doc= 'Network Country Code to use' />
</params>
</command>
<command id= 'mobile network code <0-999>' >
<params >
<param name= 'mobile' doc= 'Set the GSM mobile network code' />
<param name= 'network' doc= 'Network Commands' />
<param name= 'code' doc= 'Code commands' />
<param name= '<0-999>' doc= 'Mobile Network Code to use' />
</params>
</command>
<command id= 'short name NAME' >
<params >
<param name= 'short' doc= 'Set the short GSM network name' />
<param name= 'name' doc= 'Name Commands' />
<param name= 'NAME' doc= 'Name to use' />
</params>
</command>
<command id= 'long name NAME' >
<params >
<param name= 'long' doc= 'Set the long GSM network name' />
<param name= 'name' doc= 'Name Commands' />
<param name= 'NAME' doc= 'Name to use' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'auth policy (closed|accept-all|regexp|token)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'auth' doc= 'Authentication (not cryptographic)' />
<param name= 'policy' doc= 'Set the GSM network authentication policy' />
<param name= 'closed' doc= 'Require the MS to be activated in HLR' />
<param name= 'accept-all' doc= 'Accept all MS, whether in HLR or not' />
2017-03-08 14:37:25 +00:00
<param name= 'regexp' doc= 'Use regular expression for IMSI authorization decision' />
2016-02-20 09:56:10 +00:00
<param name= 'token' doc= 'Use SMS-token based authentication' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'authorized-regexp REGEXP' >
<params >
<param name= 'authorized-regexp' doc= 'Set regexp for IMSI which will be used for authorization decision' />
<param name= 'REGEXP' doc= 'Regular expression, IMSIs matching it are allowed to use the network' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'location updating reject cause <2-111>' >
<params >
<param name= 'location' doc= 'Set the reject cause of location updating reject' />
<param name= 'updating' doc= 'Set the reject cause of location updating reject' />
<param name= 'reject' doc= 'Set the reject cause of location updating reject' />
<param name= 'cause' doc= 'Set the reject cause of location updating reject' />
<param name= '<2-111>' doc= 'Cause Value as Per GSM TS 04.08' />
</params>
</command>
<command id= 'encryption a5 (0|1|2|3)' >
<params >
<param name= 'encryption' doc= 'Encryption options' />
<param name= 'a5' doc= 'A5 encryption' />
<param name= '0' doc= 'A5/0: No encryption' />
<param name= '1' doc= 'A5/1: Encryption' />
<param name= '2' doc= 'A5/2: Export-grade Encryption' />
<param name= '3' doc= 'A5/3: 'New' Secure Encryption' />
</params>
</command>
<command id= 'rrlp mode (none|ms-based|ms-preferred|ass-preferred)' >
<params >
<param name= 'rrlp' doc= 'Radio Resource Location Protocol' />
<param name= 'mode' doc= 'Set the Radio Resource Location Protocol Mode' />
<param name= 'none' doc= 'Don't send RRLP request' />
<param name= 'ms-based' doc= 'Request MS-based location' />
<param name= 'ms-preferred' doc= 'Request any location, prefer MS-based' />
<param name= 'ass-preferred' doc= 'Request any location, prefer MS-assisted' />
</params>
</command>
<command id= 'mm info (0|1)' >
<params >
<param name= 'mm' doc= 'Mobility Management' />
<param name= 'info' doc= 'Send MM INFO after LOC UPD ACCEPT' />
<param name= '0' doc= 'Disable' />
<param name= '1' doc= 'Enable' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'subscriber-keep-in-ram (0|1)' >
<params >
<param name= 'subscriber-keep-in-ram' doc= 'Keep unused subscribers in RAM.' />
<param name= '0' doc= 'Delete unused subscribers' />
<param name= '1' doc= 'Keep unused subscribers' />
</params>
</command>
<command id= 'timezone <-19-19> (0|15|30|45)' >
<params >
<param name= 'timezone' doc= 'Set the Timezone Offset of the network' />
<param name= '<-19-19>' doc= 'Timezone offset (hours)' />
<param name= '0' doc= 'Timezone offset (00 minutes)' />
<param name= '15' doc= 'Timezone offset (15 minutes)' />
<param name= '30' doc= 'Timezone offset (30 minutes)' />
<param name= '45' doc= 'Timezone offset (45 minutes)' />
</params>
</command>
<command id= 'timezone <-19-19> (0|15|30|45) <0-2>' >
<params >
<param name= 'timezone' doc= 'Set the Timezone Offset of the network' />
<param name= '<-19-19>' doc= 'Timezone offset (hours)' />
<param name= '0' doc= 'Timezone offset (00 minutes)' />
<param name= '15' doc= 'Timezone offset (15 minutes)' />
<param name= '30' doc= 'Timezone offset (30 minutes)' />
<param name= '45' doc= 'Timezone offset (45 minutes)' />
<param name= '<0-2>' doc= 'DST offset (hours)' />
</params>
</command>
<command id= 'no timezone' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'timezone' doc= 'Disable network timezone override, use system tz' />
</params>
</command>
<command id= 'dyn_ts_allow_tch_f (0|1)' >
<params >
<param name= 'dyn_ts_allow_tch_f' doc= 'Allow or disallow allocating TCH/F on TCH_F_TCH_H_PDCH timeslots' />
<param name= '0' doc= 'Disallow TCH/F on TCH_F_TCH_H_PDCH (default)' />
<param name= '1' doc= 'Allow TCH/F on TCH_F_TCH_H_PDCH' />
</params>
</command>
<command id= 'neci (0|1)' >
<params >
<param name= 'neci' doc= 'New Establish Cause Indication' />
<param name= '0' doc= 'Don't set the NECI bit' />
<param name= '1' doc= 'Set the NECI bit' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'handover (0|1)' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= '0' doc= 'Don't perform in-call handover' />
<param name= '1' doc= 'Perform in-call handover' />
</params>
</command>
<command id= 'handover window rxlev averaging <1-10>' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= 'window' doc= 'Measurement Window' />
<param name= 'rxlev' doc= 'Received Level Averaging' />
<param name= 'averaging' doc= 'How many RxLev measurements are used for averaging' />
<param name= '<1-10>' doc= 'Amount to use for Averaging' />
</params>
</command>
<command id= 'handover window rxqual averaging <1-10>' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= 'window' doc= 'Measurement Window' />
<param name= 'rxqual' doc= 'Received Quality Averaging' />
<param name= 'averaging' doc= 'How many RxQual measurements are used for averaging' />
<param name= '<1-10>' doc= 'Amount to use for Averaging' />
</params>
</command>
<command id= 'handover window rxlev neighbor averaging <1-10>' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= 'window' doc= 'Measurement Window' />
<param name= 'rxlev' doc= 'Received Level Averaging' />
<param name= 'neighbor' doc= 'Neighbor' />
<param name= 'averaging' doc= 'How many RxQual measurements are used for averaging' />
<param name= '<1-10>' doc= 'Amount to use for Averaging' />
</params>
</command>
<command id= 'handover power budget interval <1-99>' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= 'power' doc= 'Power Budget' />
<param name= 'budget' doc= 'How often to check if we have a better cell (SACCH frames)' />
<param name= 'interval' doc= 'Interval' />
<param name= '<1-99>' doc= 'Number' />
</params>
</command>
<command id= 'handover power budget hysteresis <0-999>' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= 'power' doc= 'Power Budget' />
<param name= 'budget' doc= 'How many dB does a neighbor to be stronger to become a HO candidate' />
<param name= 'hysteresis' doc= 'Hysteresis' />
<param name= '<0-999>' doc= 'Number' />
</params>
</command>
<command id= 'handover maximum distance <0-9999>' >
<params >
<param name= 'handover' doc= 'Handover Options' />
<param name= 'maximum' doc= 'How big is the maximum timing advance before HO is forced' />
<param name= 'distance' doc= 'Distance' />
<param name= '<0-9999>' doc= 'Number' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3101 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3101' doc= 'Set the timeout value for IMMEDIATE ASSIGNMENT (default: 10 seconds)' />
<param name= 'default' doc= 'Set to default timer value (10 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3103 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3103' doc= 'Set the timeout value for HANDOVER (default: 5 seconds)' />
<param name= 'default' doc= 'Set to default timer value (5 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3105 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3105' doc= 'Set the timer for repetition of PHYSICAL INFORMATION (default: 100 seconds)' />
<param name= 'default' doc= 'Set to default timer value (100 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3107 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3107' doc= 'Currently not used (default: 5 seconds)' />
<param name= 'default' doc= 'Set to default timer value (5 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3109 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3109' doc= 'Set the RSL SACCH deactivation timeout (default: 19 seconds)' />
<param name= 'default' doc= 'Set to default timer value (19 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3111 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3111' doc= 'Set the RSL timeout to wait before releasing the RF Channel (default: 2 seconds)' />
<param name= 'default' doc= 'Set to default timer value (2 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3113 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3113' doc= 'Set the time to try paging a subscriber (default: 60 seconds)' />
<param name= 'default' doc= 'Set to default timer value (60 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3115 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3115' doc= 'Currently not used (default: 10 seconds)' />
<param name= 'default' doc= 'Set to default timer value (10 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3117 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3117' doc= 'Currently not used (default: 10 seconds)' />
<param name= 'default' doc= 'Set to default timer value (10 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3119 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3119' doc= 'Currently not used (default: 10 seconds)' />
<param name= 'default' doc= 'Set to default timer value (10 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3122 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3122' doc= 'Waiting time (seconds) after IMM ASS REJECT (default: 10 seconds)' />
<param name= 'default' doc= 'Set to default timer value (10 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'timer t3141 (default|<1-65535>)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'timer' doc= 'Configure GSM Timers' />
2017-09-18 16:32:30 +00:00
<param name= 't3141' doc= 'Currently not used (default: 10 seconds)' />
<param name= 'default' doc= 'Set to default timer value (10 seconds)' />
<param name= '<1-65535>' doc= 'Timer Value in seconds' />
2016-02-20 09:56:10 +00:00
</params>
</command>
<command id= 'dtx-used (0|1)' >
<params >
2017-03-08 14:37:25 +00:00
<param name= 'dtx-used' doc= '.HIDDEN' />
<param name= '0' doc= 'Obsolete' />
<param name= '1' doc= 'Obsolete' />
2016-02-20 09:56:10 +00:00
</params>
</command>
<command id= 'paging any use tch (0|1)' >
<params >
<param name= 'paging' doc= 'Assign a TCH when receiving a Paging Any request' />
<param name= 'any' doc= 'Any Channel' />
<param name= 'use' doc= 'Use' />
<param name= 'tch' doc= 'TCH' />
<param name= '0' doc= 'Do not use TCH for Paging Request Any' />
<param name= '1' doc= 'Do use TCH for Paging Request Any' />
</params>
</command>
<command id= 'bts <0-255>' >
<params >
<param name= 'bts' doc= 'Select a BTS to configure' />
<param name= '<0-255>' doc= 'BTS Number' />
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-net-bts' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'type (unknown|bs11|nanobts|rbs2000|nokia_site|sysmobts)' >
<params >
<param name= 'type' doc= 'BTS Vendor/Type' />
<param name= 'unknown' doc= 'Unknown BTS Type' />
<param name= 'bs11' doc= 'Siemens BTS (BS-11 or compatible)' />
<param name= 'nanobts' doc= 'ip.access nanoBTS or compatible' />
<param name= 'rbs2000' doc= 'Ericsson RBS2000 Series' />
<param name= 'nokia_site' doc= 'Nokia {Metro,Ultra,In}Site' />
<param name= 'sysmobts' doc= 'sysmocom sysmoBTS' />
</params>
</command>
<command id= 'description .TEXT' >
<params >
2017-09-18 16:32:30 +00:00
<param name= 'description' doc= 'Save human-readable description of the object' />
2016-02-20 09:56:10 +00:00
<param name= '.TEXT' doc= 'Text until the end of the line' />
</params>
</command>
<command id= 'no description' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'description' doc= 'Remove description of the object' />
</params>
</command>
<command id= 'band BAND' >
<params >
<param name= 'band' doc= 'Set the frequency band of this BTS' />
<param name= 'BAND' doc= 'Frequency band' />
</params>
</command>
<command id= 'cell_identity <0-65535>' >
<params >
<param name= 'cell_identity' doc= 'Set the Cell identity of this BTS' />
<param name= '<0-65535>' doc= 'Cell Identity' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'dtx uplink [force]' >
<params >
<param name= 'dtx' doc= 'Configure discontinuous transmission' />
<param name= 'uplink' doc= 'Enable Uplink DTX for this BTS' />
<param name= '[force]' doc= 'MS 'shall' use DTXu instead of 'may' use (might not be supported by older phones).' />
</params>
</command>
<command id= 'dtx downlink' >
<params >
<param name= 'dtx' doc= 'Configure discontinuous transmission' />
<param name= 'downlink' doc= 'Enable Downlink DTX for this BTS' />
</params>
</command>
<command id= 'no dtx uplink' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'dtx' doc= 'Configure discontinuous transmission' />
<param name= 'uplink' doc= 'Disable Uplink DTX for this BTS' />
</params>
</command>
<command id= 'no dtx downlink' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'dtx' doc= 'Configure discontinuous transmission' />
<param name= 'downlink' doc= 'Disable Downlink DTX for this BTS' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'location_area_code <0-65535>' >
<params >
<param name= 'location_area_code' doc= 'Set the Location Area Code (LAC) of this BTS' />
<param name= '<0-65535>' doc= 'LAC' />
</params>
</command>
<command id= 'training_sequence_code <0-7>' >
<params >
<param name= 'training_sequence_code' doc= 'Set the Training Sequence Code (TSC) of this BTS' />
<param name= '<0-7>' doc= 'TSC' />
</params>
</command>
<command id= 'base_station_id_code <0-63>' >
<params >
<param name= 'base_station_id_code' doc= 'Set the Base Station Identity Code (BSIC) of this BTS' />
<param name= '<0-63>' doc= 'BSIC of this BTS' />
</params>
</command>
<command id= 'ip.access unit_id <0-65534> <0-255>' >
<params >
<param name= 'ip.access' doc= 'Abis/IP specific options' />
<param name= 'unit_id' doc= 'Set the IPA BTS Unit ID' />
<param name= '<0-65534>' doc= 'Unit ID (Site)' />
<param name= '<0-255>' doc= 'Unit ID (BTS)' />
</params>
</command>
<command id= 'ip.access rsl-ip A.B.C.D' >
<params >
<param name= 'ip.access' doc= 'Abis/IP specific options' />
<param name= 'rsl-ip' doc= 'Set the IPA RSL IP Address of the BSC' />
<param name= 'A.B.C.D' doc= 'Destination IP address for RSL connection' />
</params>
</command>
<command id= 'nokia_site skip-reset (0|1)' >
<params >
<param name= 'nokia_site' doc= 'Nokia *Site related commands' />
<param name= 'skip-reset' doc= 'Skip the reset step during bootstrap process of this BTS' />
<param name= '0' doc= 'Do NOT skip the reset' />
<param name= '1' doc= 'Skip the reset' />
</params>
</command>
<command id= 'nokia_site no-local-rel-conf (0|1)' >
<params >
<param name= 'nokia_site' doc= 'Nokia *Site related commands' />
<param name= 'no-local-rel-conf' doc= 'Do not wait for RELease CONFirm message when releasing channel locally' />
<param name= '0' doc= 'Wait for RELease CONFirm' />
<param name= '1' doc= 'Do not wait for RELease CONFirm' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'nokia_site bts-reset-timer <15-100>' >
<params >
<param name= 'nokia_site' doc= 'Nokia *Site related commands' />
<param name= 'bts-reset-timer' doc= 'The amount of time (in sec.) between BTS_RESET is sent,' />
<param name= '<15-100>' doc= 'and the BTS is being bootstrapped.' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'oml ip.access stream_id <0-255> line E1_LINE' >
<params >
<param name= 'oml' doc= 'Organization & Maintenance Link' />
<param name= 'ip.access' doc= 'A-bis/IP Specific Options' />
<param name= 'stream_id' doc= 'Set the ip.access Stream ID of the OML link of this BTS' />
<param name= '<0-255>' doc= 'Stream Identifier' />
<param name= 'line' doc= 'Virtual E1 Line Number' />
<param name= 'E1_LINE' doc= 'Virtual E1 Line Number' />
</params>
</command>
<command id= 'oml e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)' >
<params >
<param name= 'oml' doc= 'Organization & Maintenance Link' />
<param name= 'e1' doc= 'OML E1/T1 Configuration' />
<param name= 'line' doc= 'E1/T1 line number to be used for OML' />
<param name= 'E1_LINE' doc= 'E1/T1 line number to be used for OML' />
<param name= 'timeslot' doc= 'E1/T1 timeslot to be used for OML' />
<param name= '<1-31>' doc= 'E1/T1 timeslot to be used for OML' />
<param name= 'sub-slot' doc= 'E1/T1 sub-slot to be used for OML' />
<param name= '0' doc= 'Use E1/T1 sub-slot 0' />
<param name= '1' doc= 'Use E1/T1 sub-slot 1' />
<param name= '2' doc= 'Use E1/T1 sub-slot 2' />
<param name= '3' doc= 'Use E1/T1 sub-slot 3' />
<param name= 'full' doc= 'Use full E1 slot 3' />
</params>
</command>
<command id= 'oml e1 tei <0-63>' >
<params >
<param name= 'oml' doc= 'Organization & Maintenance Link' />
<param name= 'e1' doc= 'OML E1/T1 Configuration' />
<param name= 'tei' doc= 'Set the TEI to be used for OML' />
<param name= '<0-63>' doc= 'TEI Number' />
</params>
</command>
<command id= 'channel allocator (ascending|descending)' >
<params >
<param name= 'channel' doc= 'Channnel Allocator' />
<param name= 'allocator' doc= 'Channel Allocator' />
<param name= 'ascending' doc= 'Allocate Timeslots and Transceivers in ascending order' />
<param name= 'descending' doc= 'Allocate Timeslots and Transceivers in descending order' />
</params>
</command>
<command id= 'rach tx integer <0-15>' >
<params >
<param name= 'rach' doc= 'Random Access Control Channel' />
<param name= 'tx' doc= 'Set the raw tx integer value in RACH Control parameters IE' />
<param name= 'integer' doc= 'Set the raw tx integer value in RACH Control parameters IE' />
<param name= '<0-15>' doc= 'Raw tx integer value in RACH Control parameters IE' />
</params>
</command>
<command id= 'rach max transmission (1|2|4|7)' >
<params >
<param name= 'rach' doc= 'Random Access Control Channel' />
<param name= 'max' doc= 'Set the maximum number of RACH burst transmissions' />
<param name= 'transmission' doc= 'Set the maximum number of RACH burst transmissions' />
<param name= '1' doc= 'Maximum number of 1 RACH burst transmissions' />
<param name= '2' doc= 'Maximum number of 2 RACH burst transmissions' />
<param name= '4' doc= 'Maximum number of 4 RACH burst transmissions' />
<param name= '7' doc= 'Maximum number of 7 RACH burst transmissions' />
</params>
</command>
<command id= 'channel-descrption attach (0|1)' >
<params >
<param name= 'channel-descrption' doc= 'Channel Description' />
<param name= 'attach' doc= 'Set if attachment is required' />
<param name= '0' doc= 'Attachment is NOT required' />
<param name= '1' doc= 'Attachment is required (standard)' />
</params>
</command>
<command id= 'channel-descrption bs-pa-mfrms <2-9>' >
<params >
<param name= 'channel-descrption' doc= 'Channel Description' />
<param name= 'bs-pa-mfrms' doc= 'Set number of multiframe periods for paging groups' />
<param name= '<2-9>' doc= 'Number of multiframe periods for paging groups' />
</params>
</command>
<command id= 'channel-descrption bs-ag-blks-res <0-7>' >
<params >
<param name= 'channel-descrption' doc= 'Channel Description' />
<param name= 'bs-ag-blks-res' doc= 'Set number of blocks reserved for access grant' />
<param name= '<0-7>' doc= 'Number of blocks reserved for access grant' />
</params>
</command>
<command id= 'rach nm busy threshold <0-255>' >
<params >
<param name= 'rach' doc= 'Random Access Control Channel' />
<param name= 'nm' doc= 'Network Management' />
<param name= 'busy' doc= 'Set the NM Busy Threshold' />
<param name= 'threshold' doc= 'Set the NM Busy Threshold' />
<param name= '<0-255>' doc= 'NM Busy Threshold in dB' />
</params>
</command>
<command id= 'rach nm load average <0-65535>' >
<params >
<param name= 'rach' doc= 'Random Access Control Channel' />
<param name= 'nm' doc= 'Network Management' />
<param name= 'load' doc= 'Set the NM Loadaverage Slots value' />
<param name= 'average' doc= 'Set the NM Loadaverage Slots value' />
<param name= '<0-65535>' doc= 'NM Loadaverage Slots value' />
</params>
</command>
<command id= 'cell barred (0|1)' >
<params >
<param name= 'cell' doc= 'Should this cell be barred from access?' />
<param name= 'barred' doc= 'Should this cell be barred from access?' />
<param name= '0' doc= 'Cell should NOT be barred' />
<param name= '1' doc= 'Cell should be barred' />
</params>
</command>
<command id= 'rach emergency call allowed (0|1)' >
<params >
<param name= 'rach' doc= 'Random Access Control Channel' />
<param name= 'emergency' doc= 'Should this cell allow emergency calls?' />
<param name= 'call' doc= 'Should this cell allow emergency calls?' />
<param name= 'allowed' doc= 'Should this cell allow emergency calls?' />
<param name= '0' doc= 'Do NOT allow emergency calls' />
<param name= '1' doc= 'Allow emergency calls' />
</params>
</command>
<command id= 'rach access-control-class (0|1|2|3|4|5|6|7|8|9|11|12|13|14|15) (barred|allowed)' >
<params >
<param name= 'rach' doc= 'Random Access Control Channel' />
<param name= 'access-control-class' doc= 'Set access control class' />
<param name= '0' doc= 'Access control class 0' />
<param name= '1' doc= 'Access control class 1' />
<param name= '2' doc= 'Access control class 2' />
<param name= '3' doc= 'Access control class 3' />
<param name= '4' doc= 'Access control class 4' />
<param name= '5' doc= 'Access control class 5' />
<param name= '6' doc= 'Access control class 6' />
<param name= '7' doc= 'Access control class 7' />
<param name= '8' doc= 'Access control class 8' />
<param name= '9' doc= 'Access control class 9' />
<param name= '11' doc= 'Access control class 11 for PLMN use' />
<param name= '12' doc= 'Access control class 12 for security services' />
<param name= '13' doc= 'Access control class 13 for public utilities (e.g. water/gas suppliers)' />
<param name= '14' doc= 'Access control class 14 for emergency services' />
<param name= '15' doc= 'Access control class 15 for PLMN staff' />
<param name= 'barred' doc= 'barred to use access control class' />
<param name= 'allowed' doc= 'allowed to use access control class' />
</params>
</command>
<command id= 'ms max power <0-40>' >
<params >
<param name= 'ms' doc= 'MS Options' />
<param name= 'max' doc= 'Maximum transmit power of the MS' />
<param name= 'power' doc= 'Maximum transmit power of the MS' />
<param name= '<0-40>' doc= 'Maximum transmit power of the MS in dBm' />
</params>
</command>
<command id= 'periodic location update <6-1530>' >
<params >
<param name= 'periodic' doc= 'Periodic Location Updating Interval' />
<param name= 'location' doc= 'Periodic Location Updating Interval' />
<param name= 'update' doc= 'Periodic Location Updating Interval' />
<param name= '<6-1530>' doc= 'Periodic Location Updating Interval in Minutes' />
</params>
</command>
<command id= 'no periodic location update' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'periodic' doc= 'Periodic Location Updating Interval' />
<param name= 'location' doc= 'Periodic Location Updating Interval' />
<param name= 'update' doc= 'Periodic Location Updating Interval' />
</params>
</command>
<command id= 'cell reselection hysteresis <0-14>' >
<params >
<param name= 'cell' doc= 'Cell Parameters' />
<param name= 'reselection' doc= 'Cell re-selection parameters' />
<param name= 'hysteresis' doc= 'Cell Re-Selection Hysteresis in dB' />
<param name= '<0-14>' doc= 'Cell Re-Selection Hysteresis in dB' />
</params>
</command>
<command id= 'rxlev access min <0-63>' >
<params >
<param name= 'rxlev' doc= 'Minimum RxLev needed for cell access' />
<param name= 'access' doc= 'Minimum RxLev needed for cell access' />
<param name= 'min' doc= 'Minimum RxLev needed for cell access' />
<param name= '<0-63>' doc= 'Minimum RxLev needed for cell access (better than -110dBm)' />
</params>
</command>
<command id= 'cell bar qualify (0|1)' >
<params >
<param name= 'cell' doc= 'Cell Parameters' />
<param name= 'bar' doc= 'Cell Bar Qualify' />
<param name= 'qualify' doc= 'Cell Bar Qualify' />
<param name= '0' doc= 'Set CBQ to 0' />
<param name= '1' doc= 'Set CBQ to 1' />
</params>
</command>
<command id= 'cell reselection offset <0-126>' >
<params >
<param name= 'cell' doc= 'Cell Parameters' />
<param name= 'reselection' doc= 'Cell Re-Selection Parameters' />
<param name= 'offset' doc= 'Cell Re-Selection Offset (CRO) in dB' />
<param name= '<0-126>' doc= 'Cell Re-Selection Offset (CRO) in dB' />
</params>
</command>
<command id= 'temporary offset <0-60>' >
<params >
<param name= 'temporary' doc= 'Cell selection temporary negative offset' />
<param name= 'offset' doc= 'Cell selection temporary negative offset' />
<param name= '<0-60>' doc= 'Cell selection temporary negative offset in dB' />
</params>
</command>
<command id= 'temporary offset infinite' >
<params >
<param name= 'temporary' doc= 'Cell selection temporary negative offset' />
<param name= 'offset' doc= 'Cell selection temporary negative offset' />
<param name= 'infinite' doc= 'Sets cell selection temporary negative offset to infinity' />
</params>
</command>
<command id= 'penalty time <20-620>' >
<params >
<param name= 'penalty' doc= 'Cell selection penalty time' />
<param name= 'time' doc= 'Cell selection penalty time' />
<param name= '<20-620>' doc= 'Cell selection penalty time in seconds (by 20s increments)' />
</params>
</command>
<command id= 'penalty time reserved' >
<params >
<param name= 'penalty' doc= 'Cell selection penalty time' />
<param name= 'time' doc= 'Cell selection penalty time' />
<param name= 'reserved' doc= 'Set cell selection penalty time to reserved value 31, (indicate that CELL_RESELECT_OFFSET is subtracted from C2 and TEMPORARY_OFFSET is ignored)' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'radio-link-timeout <4-64>' >
<params >
<param name= 'radio-link-timeout' doc= 'Radio link timeout criterion (BTS side)' />
<param name= '<4-64>' doc= 'Radio link timeout value (lost SACCH block)' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'radio-link-timeout infinite' >
<params >
<param name= 'radio-link-timeout' doc= 'Radio link timeout criterion (BTS side)' />
<param name= 'infinite' doc= 'Infinite Radio link timeout value (use only for BTS RF testing)' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'gprs mode (none|gprs|egprs)' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'mode' doc= 'GPRS Mode for this BTS' />
<param name= 'none' doc= 'GPRS Disabled on this BTS' />
<param name= 'gprs' doc= 'GPRS Enabled on this BTS' />
<param name= 'egprs' doc= 'EGPRS (EDGE) Enabled on this BTS' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'gprs 11bit_rach_support_for_egprs (0|1)' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= '11bit_rach_support_for_egprs' doc= '11 bit RACH options' />
<param name= '0' doc= 'Disable 11 bit RACH for EGPRS' />
<param name= '1' doc= 'Enable 11 bit RACH for EGPRS' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-255>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'ns' doc= 'Network Service' />
<param name= 'timer' doc= 'Network Service Timer' />
<param name= 'tns-block' doc= '(un)blocking Timer (Tns-block) timeout' />
<param name= 'tns-block-retries' doc= '(un)blocking Timer (Tns-block) number of retries' />
<param name= 'tns-reset' doc= 'Reset Timer (Tns-reset) timeout' />
<param name= 'tns-reset-retries' doc= 'Reset Timer (Tns-reset) number of retries' />
<param name= 'tns-test' doc= 'Test Timer (Tns-test) timeout' />
<param name= 'tns-alive' doc= 'Alive Timer (Tns-alive) timeout' />
<param name= 'tns-alive-retries' doc= 'Alive Timer (Tns-alive) number of retries' />
<param name= '<0-255>' doc= 'Timer Value' />
</params>
</command>
<command id= 'gprs routing area <0-255>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'routing' doc= 'GPRS Routing Area Code' />
<param name= 'area' doc= 'GPRS Routing Area Code' />
<param name= '<0-255>' doc= 'GPRS Routing Area Code' />
</params>
</command>
<command id= 'gprs network-control-order (nc0|nc1|nc2)' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'network-control-order' doc= 'GPRS Network Control Order' />
<param name= 'nc0' doc= 'MS controlled cell re-selection, no measurement reporting' />
<param name= 'nc1' doc= 'MS controlled cell re-selection, MS sends measurement reports' />
<param name= 'nc2' doc= 'Network controlled cell re-selection, MS sends measurement reports' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'gprs control-ack-type-rach' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'control-ack-type-rach' doc= 'Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' />
</params>
</command>
<command id= 'no gprs control-ack-type-rach' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'control-ack-type-rach' doc= 'Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'gprs cell bvci <2-65535>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'cell' doc= 'GPRS Cell Settings' />
<param name= 'bvci' doc= 'GPRS BSSGP VC Identifier' />
<param name= '<2-65535>' doc= 'GPRS BSSGP VC Identifier' />
</params>
</command>
<command id= 'gprs cell timer (blocking-timer|blocking-retries|unblocking-retries|reset-timer|reset-retries|suspend-timer|suspend-retries|resume-timer|resume-retries|capability-update-timer|capability-update-retries) <0-255>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'cell' doc= 'Cell / BSSGP' />
<param name= 'timer' doc= 'Cell/BSSGP Timer' />
<param name= 'blocking-timer' doc= 'Tbvc-block timeout' />
<param name= 'blocking-retries' doc= 'Tbvc-block retries' />
<param name= 'unblocking-retries' doc= 'Tbvc-unblock retries' />
<param name= 'reset-timer' doc= 'Tbvcc-reset timeout' />
<param name= 'reset-retries' doc= 'Tbvc-reset retries' />
<param name= 'suspend-timer' doc= 'Tbvc-suspend timeout' />
<param name= 'suspend-retries' doc= 'Tbvc-suspend retries' />
<param name= 'resume-timer' doc= 'Tbvc-resume timeout' />
<param name= 'resume-retries' doc= 'Tbvc-resume retries' />
<param name= 'capability-update-timer' doc= 'Tbvc-capa-update timeout' />
<param name= 'capability-update-retries' doc= 'Tbvc-capa-update retries' />
<param name= '<0-255>' doc= 'Timer Value' />
</params>
</command>
<command id= 'gprs nsei <0-65535>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'nsei' doc= 'GPRS NS Entity Identifier' />
<param name= '<0-65535>' doc= 'GPRS NS Entity Identifier' />
</params>
</command>
<command id= 'gprs nsvc <0-1> nsvci <0-65535>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'nsvc' doc= 'Network Service Virtual Connection (NS-VC)' />
<param name= '<0-1>' doc= 'NSVC Logical Number' />
<param name= 'nsvci' doc= 'NS Virtual Connection Identifier' />
<param name= '<0-65535>' doc= 'GPRS NS VC Identifier' />
</params>
</command>
<command id= 'gprs nsvc <0-1> local udp port <0-65535>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'nsvc' doc= 'Network Service Virtual Connection (NS-VC)' />
<param name= '<0-1>' doc= 'NSVC Logical Number' />
<param name= 'local' doc= 'GPRS NS Local UDP Port' />
<param name= 'udp' doc= 'GPRS NS Local UDP Port' />
<param name= 'port' doc= 'GPRS NS Local UDP Port' />
<param name= '<0-65535>' doc= 'GPRS NS Local UDP Port Number' />
</params>
</command>
<command id= 'gprs nsvc <0-1> remote udp port <0-65535>' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'nsvc' doc= 'Network Service Virtual Connection (NS-VC)' />
<param name= '<0-1>' doc= 'NSVC Logical Number' />
<param name= 'remote' doc= 'GPRS NS Remote UDP Port' />
<param name= 'udp' doc= 'GPRS NS Remote UDP Port' />
<param name= 'port' doc= 'GPRS NS Remote UDP Port' />
<param name= '<0-65535>' doc= 'GPRS NS Remote UDP Port Number' />
</params>
</command>
<command id= 'gprs nsvc <0-1> remote ip A.B.C.D' >
<params >
<param name= 'gprs' doc= 'GPRS Packet Network' />
<param name= 'nsvc' doc= 'Network Service Virtual Connection (NS-VC)' />
<param name= '<0-1>' doc= 'NSVC Logical Number' />
<param name= 'remote' doc= 'GPRS NS Remote IP Address' />
<param name= 'ip' doc= 'GPRS NS Remote IP Address' />
<param name= 'A.B.C.D' doc= 'GPRS NS Remote IP Address' />
</params>
</command>
<command id= 'paging free <-1-1024>' >
<params >
<param name= 'paging' doc= 'Paging options' />
<param name= 'free' doc= 'Only page when having a certain amount of free slots' />
<param name= '<-1-1024>' doc= 'amount of required free paging slots. -1 to disable' />
</params>
</command>
<command id= 'system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) mode (static|computed)' >
<params >
<param name= 'system-information' doc= 'System Information Messages' />
<param name= '1' doc= 'System Information Type 1' />
<param name= '2' doc= 'System Information Type 2' />
<param name= '3' doc= 'System Information Type 3' />
<param name= '4' doc= 'System Information Type 4' />
<param name= '5' doc= 'System Information Type 5' />
<param name= '6' doc= 'System Information Type 6' />
<param name= '7' doc= 'System Information Type 7' />
<param name= '8' doc= 'System Information Type 8' />
<param name= '9' doc= 'System Information Type 9' />
<param name= '10' doc= 'System Information Type 10' />
<param name= '13' doc= 'System Information Type 13' />
<param name= '16' doc= 'System Information Type 16' />
<param name= '17' doc= 'System Information Type 17' />
<param name= '18' doc= 'System Information Type 18' />
<param name= '19' doc= 'System Information Type 19' />
<param name= '20' doc= 'System Information Type 20' />
<param name= '2bis' doc= 'System Information Type 2bis' />
<param name= '2ter' doc= 'System Information Type 2ter' />
<param name= '2quater' doc= 'System Information Type 2quater' />
<param name= '5bis' doc= 'System Information Type 5bis' />
<param name= '5ter' doc= 'System Information Type 5ter' />
<param name= 'mode' doc= 'System Information Mode' />
<param name= 'static' doc= 'Static user-specified' />
<param name= 'computed' doc= 'Dynamic, BSC-computed' />
</params>
</command>
<command id= 'system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) static HEXSTRING' >
<params >
<param name= 'system-information' doc= 'System Information Messages' />
<param name= '1' doc= 'System Information Type 1' />
<param name= '2' doc= 'System Information Type 2' />
<param name= '3' doc= 'System Information Type 3' />
<param name= '4' doc= 'System Information Type 4' />
<param name= '5' doc= 'System Information Type 5' />
<param name= '6' doc= 'System Information Type 6' />
<param name= '7' doc= 'System Information Type 7' />
<param name= '8' doc= 'System Information Type 8' />
<param name= '9' doc= 'System Information Type 9' />
<param name= '10' doc= 'System Information Type 10' />
<param name= '13' doc= 'System Information Type 13' />
<param name= '16' doc= 'System Information Type 16' />
<param name= '17' doc= 'System Information Type 17' />
<param name= '18' doc= 'System Information Type 18' />
<param name= '19' doc= 'System Information Type 19' />
<param name= '20' doc= 'System Information Type 20' />
<param name= '2bis' doc= 'System Information Type 2bis' />
<param name= '2ter' doc= 'System Information Type 2ter' />
<param name= '2quater' doc= 'System Information Type 2quater' />
<param name= '5bis' doc= 'System Information Type 5bis' />
<param name= '5ter' doc= 'System Information Type 5ter' />
<param name= 'static' doc= 'Static System Information filling' />
<param name= 'HEXSTRING' doc= 'Static user-specified SI content in HEX notation' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'early-classmark-sending (allowed|forbidden)' >
<params >
<param name= 'early-classmark-sending' doc= 'Early Classmark Sending' />
<param name= 'allowed' doc= 'Early Classmark Sending is allowed' />
<param name= 'forbidden' doc= 'Early Classmark Sending is forbidden' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'neighbor-list mode (automatic|manual|manual-si5)' >
<params >
<param name= 'neighbor-list' doc= 'Neighbor List' />
<param name= 'mode' doc= 'Mode of Neighbor List generation' />
<param name= 'automatic' doc= 'Automatically from all BTS in this OpenBSC' />
<param name= 'manual' doc= 'Manual' />
<param name= 'manual-si5' doc= 'Manual with different lists for SI2 and SI5' />
</params>
</command>
<command id= 'neighbor-list (add|del) arfcn <0-1023>' >
<params >
<param name= 'neighbor-list' doc= 'Neighbor List' />
<param name= 'add' doc= 'Add to manual neighbor list' />
<param name= 'del' doc= 'Delete from manual neighbor list' />
<param name= 'arfcn' doc= 'ARFCN of neighbor' />
<param name= '<0-1023>' doc= 'ARFCN of neighbor' />
</params>
</command>
<command id= 'si5 neighbor-list (add|del) arfcn <0-1023>' >
<params >
<param name= 'si5' doc= 'SI5 Neighbor List' />
<param name= 'neighbor-list' doc= 'SI5 Neighbor List' />
<param name= 'add' doc= 'Add to manual SI5 neighbor list' />
<param name= 'del' doc= 'Delete from SI5 manual neighbor list' />
<param name= 'arfcn' doc= 'ARFCN of neighbor' />
<param name= '<0-1023>' doc= 'ARFCN of neighbor' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'si2quater neighbor-list add earfcn <0-65535> thresh-hi <0-31> thresh-lo <0-32> prio <0-8> qrxlv <0-32> meas <0-8>' >
2017-03-08 14:37:25 +00:00
<params >
<param name= 'si2quater' doc= 'SI2quater Neighbor List' />
<param name= 'neighbor-list' doc= 'SI2quater Neighbor List' />
<param name= 'add' doc= 'Add to manual SI2quater neighbor list' />
<param name= 'earfcn' doc= 'EARFCN of neighbor' />
<param name= '<0-65535>' doc= 'EARFCN of neighbor' />
2017-09-18 16:32:30 +00:00
<param name= 'thresh-hi' doc= 'threshold high bits' />
2017-03-08 14:37:25 +00:00
<param name= '<0-31>' doc= 'threshold high bits' />
2017-09-18 16:32:30 +00:00
<param name= 'thresh-lo' doc= 'threshold low bits' />
<param name= '<0-32>' doc= 'threshold low bits (32 means NA)' />
<param name= 'prio' doc= 'priority' />
<param name= '<0-8>' doc= 'priority (8 means NA)' />
<param name= 'qrxlv' doc= 'QRXLEVMIN' />
<param name= '<0-32>' doc= 'QRXLEVMIN (32 means NA)' />
<param name= 'meas' doc= 'measurement bandwidth' />
<param name= '<0-8>' doc= 'measurement bandwidth (8 means NA)' />
2017-03-08 14:37:25 +00:00
</params>
</command>
<command id= 'si2quater neighbor-list del earfcn <0-65535>' >
<params >
<param name= 'si2quater' doc= 'SI2quater Neighbor List' />
<param name= 'neighbor-list' doc= 'SI2quater Neighbor List' />
<param name= 'del' doc= 'Delete from SI2quater manual neighbor list' />
<param name= 'earfcn' doc= 'EARFCN of neighbor' />
<param name= '<0-65535>' doc= 'EARFCN' />
</params>
</command>
<command id= 'si2quater neighbor-list add uarfcn <0-16383> <0-511> <0-1>' >
<params >
<param name= 'si2quater' doc= 'SI2quater Neighbor List' />
<param name= 'neighbor-list' doc= 'SI2quater Neighbor List' />
<param name= 'add' doc= 'Add to manual SI2quater neighbor list' />
<param name= 'uarfcn' doc= 'UARFCN of neighbor' />
<param name= '<0-16383>' doc= 'UARFCN of neighbor' />
<param name= '<0-511>' doc= 'scrambling code' />
<param name= '<0-1>' doc= 'diversity bit' />
</params>
</command>
<command id= 'si2quater neighbor-list del uarfcn <0-16383> <0-511>' >
<params >
<param name= 'si2quater' doc= 'SI2quater Neighbor List' />
<param name= 'neighbor-list' doc= 'SI2quater Neighbor List' />
<param name= 'del' doc= 'Delete from SI2quater manual neighbor list' />
<param name= 'uarfcn' doc= 'UARFCN of neighbor' />
<param name= '<0-16383>' doc= 'UARFCN' />
<param name= '<0-511>' doc= 'scrambling code' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'rf-lock-exclude' >
<params >
<param name= 'rf-lock-exclude' doc= 'Exclude this BTS from the global RF Lock' />
</params>
</command>
<command id= 'no rf-lock-exclude' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'rf-lock-exclude' doc= 'Exclude this BTS from the global RF Lock' />
</params>
</command>
<command id= 'force-combined-si' >
<params >
<param name= 'force-combined-si' doc= 'Force the generation of a single SI (no ter/bis)' />
</params>
</command>
<command id= 'no force-combined-si' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'force-combined-si' doc= 'Force the generation of a single SI (no ter/bis)' />
</params>
</command>
<command id= 'codec-support fr' >
<params >
<param name= 'codec-support' doc= 'Codec Support settings' />
<param name= 'fr' doc= 'Fullrate' />
</params>
</command>
<command id= 'codec-support fr (hr|efr|amr)' >
<params >
<param name= 'codec-support' doc= 'Codec Support settings' />
<param name= 'fr' doc= 'Fullrate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
</params>
</command>
<command id= 'codec-support fr (hr|efr|amr) (hr|efr|amr)' >
<params >
<param name= 'codec-support' doc= 'Codec Support settings' />
<param name= 'fr' doc= 'Fullrate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
</params>
</command>
<command id= 'codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)' >
<params >
<param name= 'codec-support' doc= 'Codec Support settings' />
<param name= 'fr' doc= 'Fullrate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
</params>
</command>
<command id= 'codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)' >
<params >
<param name= 'codec-support' doc= 'Codec Support settings' />
<param name= 'fr' doc= 'Fullrate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
<param name= 'hr' doc= 'Half Rate' />
<param name= 'efr' doc= 'Enhanced Full Rate' />
<param name= 'amr' doc= 'Adaptive Multirate' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'depends-on-bts <0-255>' >
<params >
<param name= 'depends-on-bts' doc= 'This BTS can only be started if another one is up' />
<param name= '<0-255>' doc= 'BTS Number' />
</params>
</command>
<command id= 'depeneds-on-bts <0-255>' >
<params >
<param name= 'depeneds-on-bts' doc= 'Negate a command or set its defaults' />
<param name= '<0-255>' doc= 'This BTS can only be started if another one is up' />
</params>
</command>
<command id= 'amr tch-f modes (0|1|2|3|4|5|6|7)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
</params>
</command>
<command id= 'amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
</params>
</command>
<command id= 'amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
</params>
</command>
<command id= 'amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '6' doc= '10,2k' />
<param name= '7' doc= '12,2k' />
</params>
</command>
<command id= 'amr tch-f threshold (ms|bts) <0-63>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'threshold' doc= 'AMR threshold between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-f threshold (ms|bts) <0-63> <0-63>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'threshold' doc= 'AMR threshold between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-f threshold (ms|bts) <0-63> <0-63> <0-63>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'threshold' doc= 'AMR threshold between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-f hysteresis (ms|bts) <0-15>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'hysteresis' doc= 'AMR hysteresis between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-f hysteresis (ms|bts) <0-15> <0-15>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'hysteresis' doc= 'AMR hysteresis between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-f hysteresis (ms|bts) <0-15> <0-15> <0-15>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'hysteresis' doc= 'AMR hysteresis between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-f start-mode (auto|1|2|3|4)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-f' doc= 'Full Rate' />
<param name= 'start-mode' doc= 'Initial codec to use with AMR' />
<param name= 'auto' doc= 'Automatically' />
<param name= '1' doc= 'First codec' />
<param name= '2' doc= 'Second codec' />
<param name= '3' doc= 'Third codec' />
<param name= '4' doc= 'Fourth codec' />
</params>
</command>
<command id= 'amr tch-h modes (0|1|2|3|4|5)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
</params>
</command>
<command id= 'amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
</params>
</command>
<command id= 'amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
</params>
</command>
<command id= 'amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'modes' doc= 'Codec modes to use with AMR codec' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
<param name= '0' doc= '4,75k' />
<param name= '1' doc= '5,15k' />
<param name= '2' doc= '5,90k' />
<param name= '3' doc= '6,70k' />
<param name= '4' doc= '7,40k' />
<param name= '5' doc= '7,95k' />
</params>
</command>
<command id= 'amr tch-h threshold (ms|bts) <0-63>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'threshold' doc= 'AMR threshold between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-h threshold (ms|bts) <0-63> <0-63>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'threshold' doc= 'AMR threshold between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-h threshold (ms|bts) <0-63> <0-63> <0-63>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'threshold' doc= 'AMR threshold between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
<param name= '<0-63>' doc= 'Threshold between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-h hysteresis (ms|bts) <0-15>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'hysteresis' doc= 'AMR hysteresis between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-h hysteresis (ms|bts) <0-15> <0-15>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'hysteresis' doc= 'AMR hysteresis between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-h hysteresis (ms|bts) <0-15> <0-15> <0-15>' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'hysteresis' doc= 'AMR hysteresis between codecs' />
<param name= 'ms' doc= 'MS side' />
<param name= 'bts' doc= 'BTS side' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
<param name= '<0-15>' doc= 'Hysteresis between codec 1 and 2' />
</params>
</command>
<command id= 'amr tch-h start-mode (auto|1|2|3|4)' >
<params >
<param name= 'amr' doc= 'Adaptive Multi Rate settings' />
<param name= 'tch-h' doc= 'Half Rate' />
<param name= 'start-mode' doc= 'Initial codec to use with AMR' />
<param name= 'auto' doc= 'Automatically' />
<param name= '1' doc= 'First codec' />
<param name= '2' doc= 'Second codec' />
<param name= '3' doc= 'Third codec' />
<param name= '4' doc= 'Fourth codec' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'pcu-socket PATH' >
<params >
<param name= 'pcu-socket' doc= 'PCU Socket Path for using OsmoPCU co-located with BSC (legacy BTS)' />
<param name= 'PATH' doc= 'Path in the file system for the unix-domain PCU socket' />
</params>
</command>
2016-02-20 09:56:10 +00:00
<command id= 'trx <0-255>' >
<params >
<param name= 'trx' doc= 'Radio Transceiver' />
<param name= '<0-255>' doc= 'Select a TRX to configure' />
</params>
</command>
<command id= 'is-connection-list (add|del) <0-2047> <0-2047> <0-255>' >
<params >
2017-09-18 16:32:30 +00:00
<param name= 'is-connection-list' doc= 'Interface Switch Connection List' />
2016-02-20 09:56:10 +00:00
<param name= 'add' doc= 'Add to IS list' />
<param name= 'del' doc= 'Delete from IS list' />
<param name= '<0-2047>' doc= 'ICP1' />
<param name= '<0-2047>' doc= 'ICP2' />
<param name= '<0-255>' doc= 'Contiguity Index' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'abis-lower-transport (single-timeslot|super-channel)' >
<params >
<param name= 'abis-lower-transport' doc= 'Configure thee Abis Lower Transport' />
<param name= 'single-timeslot' doc= 'Single Timeslot (classic Abis)' />
<param name= 'super-channel' doc= 'SuperChannel (Packet Abis)' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'con-connection-group <1-31>' >
<params >
<param name= 'con-connection-group' doc= 'Configure a CON (Concentrator) Connection Group' />
<param name= '<1-31>' doc= 'CON Connection Group Number' />
</params>
</command>
2017-09-18 16:32:30 +00:00
<command id= 'del-connection-group <1-31>' >
<params >
<param name= 'del-connection-group' doc= 'Delete a CON (Concentrator) Connection Group' />
<param name= '<1-31>' doc= 'CON Connection Group Number' />
</params>
</command>
2016-02-20 09:56:10 +00:00
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-net-bts-trx' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'arfcn <0-1023>' >
<params >
<param name= 'arfcn' doc= 'Set the ARFCN for this TRX' />
<param name= '<0-1023>' doc= 'Absolute Radio Frequency Channel Number' />
</params>
</command>
<command id= 'description .TEXT' >
<params >
2017-09-18 16:32:30 +00:00
<param name= 'description' doc= 'Save human-readable description of the object' />
2016-02-20 09:56:10 +00:00
<param name= '.TEXT' doc= 'Text until the end of the line' />
</params>
</command>
<command id= 'no description' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'description' doc= 'Remove description of the object' />
</params>
</command>
<command id= 'nominal power <0-100>' >
<params >
<param name= 'nominal' doc= 'Nominal TRX RF Power in dBm' />
<param name= 'power' doc= 'Nominal TRX RF Power in dBm' />
<param name= '<0-100>' doc= 'Nominal TRX RF Power in dBm' />
</params>
</command>
<command id= 'max_power_red <0-100>' >
<params >
<param name= 'max_power_red' doc= 'Reduction of maximum BS RF Power (relative to nominal power)' />
<param name= '<0-100>' doc= 'Reduction of maximum BS RF Power in dB' />
</params>
</command>
<command id= 'rsl e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)' >
<params >
<param name= 'rsl' doc= 'RSL Parameters' />
<param name= 'e1' doc= 'E1/T1 interface to be used for RSL' />
<param name= 'line' doc= 'E1/T1 interface to be used for RSL' />
<param name= 'E1_LINE' doc= 'E1/T1 Line Number to be used for RSL' />
<param name= 'timeslot' doc= 'E1/T1 Timeslot to be used for RSL' />
<param name= '<1-31>' doc= 'E1/T1 Timeslot to be used for RSL' />
<param name= 'sub-slot' doc= 'E1/T1 Sub-slot to be used for RSL' />
<param name= '0' doc= 'E1/T1 Sub-slot 0 is to be used for RSL' />
<param name= '1' doc= 'E1/T1 Sub-slot 1 is to be used for RSL' />
<param name= '2' doc= 'E1/T1 Sub-slot 2 is to be used for RSL' />
<param name= '3' doc= 'E1/T1 Sub-slot 3 is to be used for RSL' />
<param name= 'full' doc= 'E1/T1 full timeslot is to be used for RSL' />
</params>
</command>
<command id= 'rsl e1 tei <0-63>' >
<params >
<param name= 'rsl' doc= 'RSL Parameters' />
<param name= 'e1' doc= 'Set the TEI to be used for RSL' />
<param name= 'tei' doc= 'Set the TEI to be used for RSL' />
<param name= '<0-63>' doc= 'TEI to be used for RSL' />
</params>
</command>
<command id= 'rf_locked (0|1)' >
<params >
<param name= 'rf_locked' doc= 'Set or unset the RF Locking (Turn off RF of the TRX)' />
<param name= '0' doc= 'TRX is NOT RF locked (active)' />
<param name= '1' doc= 'TRX is RF locked (turned off)' />
</params>
</command>
<command id= 'timeslot <0-7>' >
<params >
<param name= 'timeslot' doc= 'Select a Timeslot to configure' />
<param name= '<0-7>' doc= 'Timeslot number' />
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-net-bts-trx-ts' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'phys_chan_config (none|ccch|ccch+sdcch4|tch/f|tch/h|sdcch8|pdch|tch/f_pdch|unknown|ccch+sdcch4+cbch|sdcch8+cbch|tch/f_tch/h_pdch)' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'phys_chan_config' doc= 'Physical Channel Combination' />
<param name= 'none' doc= 'Physical Channel not configured' />
<param name= 'ccch' doc= 'FCCH + SCH + BCCH + CCCH (Comb. IV)' />
<param name= 'ccch+sdcch4' doc= 'FCCH + SCH + BCCH + CCCH + 4 SDCCH + 2 SACCH (Comb. V)' />
<param name= 'tch/f' doc= 'TCH/F + FACCH/F + SACCH (Comb. I)' />
<param name= 'tch/h' doc= '2 TCH/H + 2 FACCH/H + 2 SACCH (Comb. II)' />
<param name= 'sdcch8' doc= '8 SDCCH + 4 SACCH (Comb. VII)' />
<param name= 'pdch' doc= 'Packet Data Channel for GPRS/EDGE' />
<param name= 'tch/f_pdch' doc= 'Dynamic TCH/F or GPRS PDCH' />
<param name= 'unknown' doc= 'Unknown / Unsupported channel combination' />
2017-03-08 14:37:25 +00:00
<param name= 'ccch+sdcch4+cbch' doc= 'FCCH + SCH + BCCH + CCCH + CBCH + 3 SDCCH + 2 SACCH (Comb. V)' />
<param name= 'sdcch8+cbch' doc= '7 SDCCH + 4 SACCH + CBCH (Comb. VII)' />
<param name= 'tch/f_tch/h_pdch' doc= 'Dynamic TCH/F or TCH/H or GPRS PDCH' />
2016-02-20 09:56:10 +00:00
</params>
</command>
<command id= 'phys_chan_config PCHAN' >
<params >
<param name= 'phys_chan_config' doc= 'Physical Channel configuration (TCH/SDCCH/...)' />
<param name= 'PCHAN' doc= 'Physical Channel' />
</params>
</command>
<command id= 'training_sequence_code <0-7>' >
<params >
<param name= 'training_sequence_code' doc= 'Training Sequence Code of the Timeslot' />
<param name= '<0-7>' doc= 'TSC' />
</params>
</command>
<command id= 'hopping enabled (0|1)' >
<params >
<param name= 'hopping' doc= 'Configure frequency hopping' />
<param name= 'enabled' doc= 'Enable or disable frequency hopping' />
<param name= '0' doc= 'Disable frequency hopping' />
<param name= '1' doc= 'Enable frequency hopping' />
</params>
</command>
<command id= 'hopping sequence-number <0-63>' >
<params >
<param name= 'hopping' doc= 'Configure frequency hopping' />
<param name= 'sequence-number' doc= 'Which hopping sequence to use for this channel' />
<param name= '<0-63>' doc= 'Hopping Sequence Number (HSN)' />
</params>
</command>
<command id= 'hopping maio <0-63>' >
<params >
<param name= 'hopping' doc= 'Configure frequency hopping' />
<param name= 'maio' doc= 'Which hopping MAIO to use for this channel' />
<param name= '<0-63>' doc= 'Mobile Allocation Index Offset (MAIO)' />
</params>
</command>
<command id= 'hopping arfcn add <0-1023>' >
<params >
<param name= 'hopping' doc= 'Configure frequency hopping' />
<param name= 'arfcn' doc= 'Configure hopping ARFCN list' />
<param name= 'add' doc= 'Add an entry to the hopping ARFCN list' />
<param name= '<0-1023>' doc= 'ARFCN' />
</params>
</command>
<command id= 'hopping arfcn del <0-1023>' >
<params >
<param name= 'hopping' doc= 'Configure frequency hopping' />
<param name= 'arfcn' doc= 'Configure hopping ARFCN list' />
<param name= 'del' doc= 'Delete an entry to the hopping ARFCN list' />
<param name= '<0-1023>' doc= 'ARFCN' />
</params>
</command>
<command id= 'e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)' >
<params >
<param name= 'e1' doc= 'E1/T1 channel connected to this on-air timeslot' />
<param name= 'line' doc= 'E1/T1 channel connected to this on-air timeslot' />
<param name= 'E1_LINE' doc= 'E1/T1 line connected to this on-air timeslot' />
<param name= 'timeslot' doc= 'E1/T1 timeslot connected to this on-air timeslot' />
<param name= '<1-31>' doc= 'E1/T1 timeslot connected to this on-air timeslot' />
<param name= 'sub-slot' doc= 'E1/T1 sub-slot connected to this on-air timeslot' />
<param name= '0' doc= 'E1/T1 sub-slot 0 connected to this on-air timeslot' />
<param name= '1' doc= 'E1/T1 sub-slot 1 connected to this on-air timeslot' />
<param name= '2' doc= 'E1/T1 sub-slot 2 connected to this on-air timeslot' />
<param name= '3' doc= 'E1/T1 sub-slot 3 connected to this on-air timeslot' />
<param name= 'full' doc= 'Full E1/T1 timeslot connected to this on-air timeslot' />
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'oml' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'change-adm-state (locked|unlocked|shutdown|null)' >
<params >
<param name= 'change-adm-state' doc= 'Change the Administrative State' />
<param name= 'locked' doc= 'Locked' />
<param name= 'unlocked' doc= 'Unlocked' />
<param name= 'shutdown' doc= 'Shutdown' />
<param name= 'null' doc= 'NULL' />
</params>
</command>
<command id= 'opstart' >
<params >
<param name= 'opstart' doc= 'Send an OPSTART message to the object' />
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'om2k' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'reset-command' >
<params >
<param name= 'reset-command' doc= 'Reset the MO' />
</params>
</command>
<command id= 'start-request' >
<params >
<param name= 'start-request' doc= 'Start the MO' />
</params>
</command>
<command id= 'status-request' >
<params >
<param name= 'status-request' doc= 'Get the MO Status' />
</params>
</command>
<command id= 'connect-command' >
<params >
<param name= 'connect-command' doc= 'Connect the MO' />
</params>
</command>
<command id= 'disconnect-command' >
<params >
<param name= 'disconnect-command' doc= 'Disconnect the MO' />
</params>
</command>
<command id= 'enable-request' >
<params >
<param name= 'enable-request' doc= 'Enable the MO' />
</params>
</command>
<command id= 'disable-request' >
<params >
<param name= 'disable-request' doc= 'Disable the MO' />
</params>
</command>
<command id= 'operational-info <0-1>' >
<params >
<param name= 'operational-info' doc= 'Set operational information' />
<param name= '<0-1>' doc= 'Set operational info to 0 or 1' />
</params>
</command>
<command id= 'test-request' >
<params >
<param name= 'test-request' doc= 'Test the MO' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'capabilities-request' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'capabilities-request' doc= 'Request MO capabilities' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'configuration-request' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'configuration-request' doc= 'Send the configuration request for current MO' />
2016-02-20 09:56:10 +00:00
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'om2k-con-group' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'con-path (add|del) <0-2047> <0-255> deconcentrated <0-63>' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'con-path' doc= 'CON Path (In/Out)' />
<param name= 'add' doc= 'Add CON Path to Concentration Group' />
<param name= 'del' doc= 'Delete CON Path from Concentration Group' />
<param name= '<0-2047>' doc= 'CON Conection Point' />
<param name= '<0-255>' doc= 'Contiguity Index' />
<param name= 'deconcentrated' doc= 'De-concentrated in/outlet' />
<param name= '<0-63>' doc= 'TEI Value' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'con-path (add|del) <0-2047> <0-255> concentrated <1-16>' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'con-path' doc= 'CON Path (In/Out)' />
<param name= 'add' doc= 'Add CON Path to Concentration Group' />
<param name= 'del' doc= 'Delete CON Path from Concentration Group' />
<param name= '<0-2047>' doc= 'CON Conection Point' />
<param name= '<0-255>' doc= 'Contiguity Index' />
<param name= 'concentrated' doc= 'Concentrated in/outlet' />
<param name= '<1-16>' doc= 'Tag Number' />
2016-02-20 09:56:10 +00:00
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-mncc-int' >
2016-02-20 09:56:10 +00:00
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'default-codec tch-f (fr|efr|amr)' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'default-codec' doc= 'Set default codec' />
<param name= 'tch-f' doc= 'Codec for TCH/F' />
<param name= 'fr' doc= 'Full-Rate' />
<param name= 'efr' doc= 'Enhanced Full-Rate' />
<param name= 'amr' doc= 'Adaptive Multi-Rate' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'default-codec tch-h (hr|amr)' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'default-codec' doc= 'Set default codec' />
<param name= 'tch-h' doc= 'Codec for TCH/H' />
<param name= 'hr' doc= 'Half-Rate' />
<param name= 'amr' doc= 'Adaptive Multi-Rate' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'meas-feed destination ADDR <0-65535>' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'meas-feed' doc= 'Measurement export related' />
<param name= 'destination' doc= 'destination' />
<param name= 'ADDR' doc= 'address or hostname' />
<param name= '<0-65535>' doc= 'port number' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'meas-feed scenario NAME' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'meas-feed' doc= 'Measurement export related' />
<param name= 'scenario' doc= 'scenario' />
<param name= 'NAME' doc= 'Name up to 31 characters included in report' />
2016-02-20 09:56:10 +00:00
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-nitb' >
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'subscriber-create-on-demand [no-extension]' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'subscriber-create-on-demand' doc= 'Make a new record when a subscriber is first seen.' />
<param name= '[no-extension]' doc= 'Do not automatically assign extension to created subscribers' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'subscriber-create-on-demand random <1-9999999999> <2-9999999999>' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'subscriber-create-on-demand' doc= 'Set random parameters for a new record when a subscriber is first seen.' />
<param name= 'random' doc= 'Set random parameters for a new record when a subscriber is first seen.' />
<param name= '<1-9999999999>' doc= 'Minimum for subscriber extension' />
<param name= '<2-9999999999>' doc= 'Maximum for subscriber extension' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'no subscriber-create-on-demand' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
2017-03-08 14:37:25 +00:00
<param name= 'subscriber-create-on-demand' doc= 'Make a new record when a subscriber is first seen.' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'assign-tmsi' >
2016-02-20 09:56:10 +00:00
<params >
2017-03-08 14:37:25 +00:00
<param name= 'assign-tmsi' doc= 'Assign TMSI during Location Updating.' />
2016-02-20 09:56:10 +00:00
</params>
</command>
2017-03-08 14:37:25 +00:00
<command id= 'no assign-tmsi' >
2016-02-20 09:56:10 +00:00
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
2017-03-08 14:37:25 +00:00
<param name= 'assign-tmsi' doc= 'Assign TMSI during Location Updating.' />
2016-02-20 09:56:10 +00:00
</params>
</command>
</node>
2017-09-18 16:32:30 +00:00
<node id= 'config-smpp' >
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'smpp-first' >
<params >
<param name= 'smpp-first' doc= 'Try SMPP routes before the subscriber DB' />
</params>
</command>
<command id= 'no smpp-first' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'smpp-first' doc= 'Try SMPP before routes before the subscriber DB' />
</params>
</command>
<command id= 'local-tcp-port <1-65535>' >
<params >
<param name= 'local-tcp-port' doc= 'Set the local TCP port on which we listen for SMPP' />
<param name= '<1-65535>' doc= 'TCP port number' />
</params>
</command>
<command id= 'local-tcp-ip A.B.C.D <1-65535>' >
<params >
<param name= 'local-tcp-ip' doc= 'Set the local IP address and TCP port on which we listen for SMPP' />
<param name= 'A.B.C.D' doc= 'Local IP address' />
<param name= '<1-65535>' doc= 'TCP port number' />
</params>
</command>
<command id= 'system-id ID' >
<params >
<param name= 'system-id' doc= 'Set the System ID of this SMSC' />
<param name= 'ID' doc= 'Alphanumeric SMSC System ID' />
</params>
</command>
<command id= 'policy (accept-all|closed)' >
<params >
<param name= 'policy' doc= 'Set the authentication policy of this SMSC' />
<param name= 'accept-all' doc= 'Accept all SMPP connections independeint of system ID / passwd' />
<param name= 'closed' doc= 'Accept only SMPP connections from ESMEs explicitly configured' />
</params>
</command>
<command id= 'esme NAME' >
<params >
<param name= 'esme' doc= 'Configure a particular ESME' />
<param name= 'NAME' doc= 'Alphanumeric System ID of the ESME to be configured' />
</params>
</command>
<command id= 'no esme NAME' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'esme' doc= 'Remove ESME configuration' />
<param name= 'NAME' doc= 'Alphanumeric System ID of the ESME to be removed' />
</params>
</command>
</node>
<node id= 'config-smpp-esme' >
<command id= 'help' >
<params >
<param name= 'help' doc= 'Description of the interactive help system' />
</params>
</command>
<command id= 'list' >
<params >
<param name= 'list' doc= 'Print command list' />
</params>
</command>
<command id= 'write terminal' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'terminal' doc= 'Write to terminal' />
</params>
</command>
<command id= 'write file' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'file' doc= 'Write to configuration file' />
</params>
</command>
<command id= 'write memory' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
<param name= 'memory' doc= 'Write configuration to the file (same as write file)' />
</params>
</command>
<command id= 'write' >
<params >
<param name= 'write' doc= 'Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id= 'show running-config' >
<params >
<param name= 'show' doc= 'Show running system information' />
<param name= 'running-config' doc= 'running configuration' />
</params>
</command>
<command id= 'exit' >
<params >
<param name= 'exit' doc= 'Exit current mode and down to previous mode' />
</params>
</command>
<command id= 'end' >
<params >
<param name= 'end' doc= 'End current mode and change to enable mode.' />
</params>
</command>
<command id= 'password PASSWORD' >
<params >
<param name= 'password' doc= 'Set the password for this ESME' />
<param name= 'PASSWORD' doc= 'Alphanumeric password string' />
</params>
</command>
<command id= 'no password' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'password' doc= 'Remove the password for this ESME' />
</params>
</command>
<command id= 'route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX' >
<params >
<param name= 'route' doc= 'Configure a route for MO-SMS to be sent to this ESME' />
<param name= 'prefix' doc= 'Prefix-match route' />
<param name= 'unknown' doc= 'Unknown type-of-number' />
<param name= 'international' doc= 'International type-of-number' />
<param name= 'national' doc= 'National type-of-number' />
<param name= 'network' doc= 'Network specific type-of-number' />
<param name= 'subscriber' doc= 'Subscriber type-of-number' />
<param name= 'alpha' doc= 'Alphanumeric type-of-number' />
<param name= 'abbrev' doc= 'Abbreviated type-of-number' />
<param name= 'unknown' doc= 'Unknown numbering plan' />
<param name= 'isdn' doc= 'ISDN (E.164) numbering plan' />
<param name= 'x121' doc= 'X.121 numbering plan' />
<param name= 'f69' doc= 'F.69 numbering plan' />
<param name= 'e212' doc= 'E.212 numbering plan' />
<param name= 'national' doc= 'National numbering plan' />
<param name= 'private' doc= 'Private numbering plan' />
<param name= 'ermes' doc= 'ERMES numbering plan' />
<param name= 'ip' doc= 'IP numbering plan' />
<param name= 'wap' doc= 'WAP numbeing plan' />
<param name= 'PREFIX' doc= 'Destination number prefix' />
</params>
</command>
<command id= 'no route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'route' doc= 'Configure a route for MO-SMS to be sent to this ESME' />
<param name= 'prefix' doc= 'Prefix-match route' />
<param name= 'unknown' doc= 'Unknown type-of-number' />
<param name= 'international' doc= 'International type-of-number' />
<param name= 'national' doc= 'National type-of-number' />
<param name= 'network' doc= 'Network specific type-of-number' />
<param name= 'subscriber' doc= 'Subscriber type-of-number' />
<param name= 'alpha' doc= 'Alphanumeric type-of-number' />
<param name= 'abbrev' doc= 'Abbreviated type-of-number' />
<param name= 'unknown' doc= 'Unknown numbering plan' />
<param name= 'isdn' doc= 'ISDN (E.164) numbering plan' />
<param name= 'x121' doc= 'X.121 numbering plan' />
<param name= 'f69' doc= 'F.69 numbering plan' />
<param name= 'e212' doc= 'E.212 numbering plan' />
<param name= 'national' doc= 'National numbering plan' />
<param name= 'private' doc= 'Private numbering plan' />
<param name= 'ermes' doc= 'ERMES numbering plan' />
<param name= 'ip' doc= 'IP numbering plan' />
<param name= 'wap' doc= 'WAP numbeing plan' />
<param name= 'PREFIX' doc= 'Destination number prefix' />
</params>
</command>
<command id= 'default-route' >
<params >
<param name= 'default-route' doc= 'Set this ESME as default-route for all SMS to unknown destinations' />
</params>
</command>
<command id= 'no default-route' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'default-route' doc= 'Remove this ESME as default-route for all SMS to unknown destinations' />
</params>
</command>
<command id= 'deliver-src-imsi' >
<params >
<param name= 'deliver-src-imsi' doc= 'Enable the use of IMSI as source address in DELIVER' />
</params>
</command>
<command id= 'no deliver-src-imsi' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'deliver-src-imsi' doc= 'Disable the use of IMSI as source address in DELIVER' />
</params>
</command>
<command id= 'osmocom-extensions' >
<params >
<param name= 'osmocom-extensions' doc= 'Enable the use of Osmocom SMPP Extensions for this ESME' />
</params>
</command>
<command id= 'no osmocom-extensions' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'osmocom-extensions' doc= 'Disable the use of Osmocom SMPP Extensions for this ESME' />
</params>
</command>
<command id= 'dcs-transparent' >
<params >
<param name= 'dcs-transparent' doc= 'Enable the transparent pass-through of TP-DCS to SMPP DataCoding' />
</params>
</command>
<command id= 'no dcs-transparent' >
<params >
<param name= 'no' doc= 'Negate a command or set its defaults' />
<param name= 'dcs-transparent' doc= 'Disable the transparent pass-through of TP-DCS to SMPP DataCoding' />
</params>
</command>
</node>
</vtydoc>