e86c02e107
bsc: Move the BSC<->MSC variables to a new struct.
...
Move the MSC related information out of the bsc_data and update
the code to use this BSC configuration. This is greatly cleaning
up the code and in theory there might now be two BSC and two MSCs
that one application can handle (minus the missing VTY config)
2011-02-10 20:09:09 +01:00
ee63d7d15e
stp: Allow/Disallow to inject messages on the UDP/M2UA interface
2011-02-10 20:09:08 +01:00
0452f22a21
stp: Add code that allows to inject messages on any linkset
...
This can be useful to test out certain messages without having
any of the linksets be fully connected. It is not possible to
get the result. In the future this code should reply with an
M2UA error message if something went wrong.
2011-02-10 20:09:08 +01:00
f603f28488
isup: Make it possible for the STP to handle/not handle ISUP messages
...
Add an option to decide if we should handle GROUP BLOCK and RESET
messages inside the STP or if we should forward those as well.
2011-01-30 00:24:15 +01:00
3a1c0af868
udp: Create a SNMP session per UDP
...
We do not have the multiple callbacks from SNMP under control
and we can only save the last request if the SNMP Session is
inside the link. This is mostly a workaround for Net-SNMP and
the missing documentation on the async functionality.
2011-01-24 20:21:11 +01:00
36260e915a
pcap: Classify the direction of such a message
2011-01-22 21:33:18 +01:00
ddf8eae7da
pcap: Run all pcap operations through one method
2011-01-22 21:33:11 +01:00
c6bfa27b5e
udp: Allow to create multiple links via UDP
...
This is the easiest way to support multiple links over UDP.
Specify the number you want and they will be initiated. All
these links will run via the same UDP port.
2011-01-22 17:24:06 +01:00
a310e53243
vty: Classify the application that we run and provide different options
...
The VTY interface is used for three different application and not
every option will make sense for every app. In the long run we will
split the vty interface but for now we just qualify the application.
2011-01-22 16:34:16 +01:00
eab20964b2
udp: Make the SNMP code asynchronous
...
Do not block the application when doing a SNMP request. Work
with the results coming back from the callback. Right now a
link can only be taken down and up.
2011-01-21 19:40:49 +01:00
083a30b9b8
udp: Poll SNMP for timeouts and fd every 100ms
...
This is the easiest way to integrate net-snmp with the event loop,
every 100ms we are going to check for timeouts or incoming messages
2011-01-21 18:01:36 +01:00
f38114eee2
udp: Allow to run multiple links through the same socket
...
The UDP socket will be shared between multiple links, the
snmp session will be also shared between multiple links on
the same hardware.
2011-01-21 18:01:36 +01:00
a8ce061d86
mtp: Move the link testing into a new file for mtp_link
...
The link testing should work under the linkset and if the
SLTM is failing the link should be taken down and it should
be restarted.
2011-01-20 19:07:16 +01:00
d8a73e24d2
isup: Allow to have a different OPC for ISUP messages.
2011-01-20 11:49:39 +01:00
9cf11bc109
stp: Create a M2UA link by hand and connect the SCCP routines
...
This is a hacked version that will just forward SCCP from one
linkset to another one. It is missing configuration and ISUP.
2011-01-20 11:37:50 +01:00
0e2f9116f8
mtp: Rename link_data to mtp_link and move out the transport specific things
...
Rename link_data to mtp_link and move it into the mtp_data header
file, also remove the union to ease creating more of the subtypes.
This is done in preparation to the linkset knowing more about the
link (e.g. having a link test per link instead of per link).
2011-01-17 14:11:26 +01:00
0f833b084b
mtp: take the linkset down when the last link is failing
2011-01-17 11:27:01 +01:00
85e17d1224
mtp: Remove the forced_down as it is never read in that application
2011-01-17 11:27:00 +01:00
fe72c160e2
mtp: Turn the MTPl2 link into a list of links.
2011-01-17 11:27:00 +01:00
644aafbc94
mtp: Make the link_data be a child of the link_set
...
Change the order of the link and linkset. The link will be
below the linkset. This change should make it more easy to
introduce multiple linksets.
2011-01-17 11:21:11 +01:00
c8405692b3
mtp: Propagate link and linkset failures in two stages
...
Handle a single link failure in links.c and if all the
links have failed propagate it up. This is preparing the
multiple links support.
2011-01-17 11:21:11 +01:00
569f1e171d
mtp: Rename mtp_link to mtp_link_set as this is the linkset
...
The link_udp is actually below the linkset. We need to get this
right now and then can have multiple links.
2011-01-17 11:21:11 +01:00
b6edf97481
linkset: Prepare the UDP support to support multiple links.
2011-01-17 11:21:10 +01:00
016ba29ec2
msc: Remove the msc_clear_queue now that it is not needed
2011-01-17 11:21:10 +01:00
a99b04b700
mtp: Move the link code into a new file called links.
2011-01-17 11:21:09 +01:00
f9b4a86e8d
misc: Remove the link_c7 dummy methods
2011-01-17 11:21:09 +01:00
de56c22702
license: Switch to the GNU AGPLv3 for this network service
2011-01-16 20:35:13 +01:00
7a72556577
mtp: Allow to have a different POC for SCCP
2011-01-01 13:34:58 +01:00
b38b33b884
mtp: Make the spare/ni configurable
2010-11-26 21:21:04 +01:00
7694381f52
udt: Add a forward_only to the bsc struct and use it for the msc_conn
...
Simply forward everything, no need for inspecting things.
2010-11-16 11:16:37 +01:00
594ee9a8c4
udt_relay: Add a forked copy of main to just relay messages
...
Do not run any of the header rewriting for messages. This will
simply relay SCCP friends to the MTP library. Some work on msc_conn.c
is needed to avoid calling most of it.
2010-11-16 11:03:19 +01:00
5d930f8745
mtp: Store the mtp_link inside the connection
...
Prepare to have multiple links to the BSC.
2010-10-08 23:18:15 +08:00
0e4e35fdd6
bsc: Be able to configure the LAC/MNC/MCC...
2010-09-30 03:04:28 +08:00
7942abc95d
vty: Move the vty code to a new file, move config params.
2010-09-30 00:34:46 +08:00
7b7c297c8f
msc: Separate the BSC and MSC link completly...
...
Make the msc_conn responsible for creating the link to
the core network and reopening it, make the BTS code just
call the msc methods and the MSC will throw away data in
case it can not be forwarded.
This avoids a problem that we start a reconnect timer
while we have a connection in progress and then add the
same file descriptor twice. This is mostly a speculative
fix to the problem.
2010-08-07 05:41:06 +08:00
0c95c6ac93
msc: Rename closing to msc_link_down
...
This is the indicator if the MSC is connected and authenticated
or not. This name should be better than closing.
2010-08-07 02:39:37 +08:00
43d9eec14b
msc: Make close_msc public, call it from main..
...
We would have not stopped the timer, fix that by only
having one function to close the connection to the msc.
2010-08-07 01:54:19 +08:00
cf381e2447
Update SCCP includes for the new location of files.
2010-08-04 18:39:26 +08:00
cbf7d18bb9
Use libosmocore instead of the old temporary laF0rge1 lib..
2010-08-04 06:08:40 +08:00
5aa17014de
u_int8_t -> uint8_t
2010-07-31 04:37:26 +08:00
97f66e2b53
Public release of the cellmgr_ng code to convert E1 to IPA SCCP
2010-07-28 03:36:32 +08:00
Holger Hans Peter Freyther