/////////////////////////////////////////////////////////////////////////////// // // // Copyright Test Competence Center (TCC) ETH 2016 // // // // The copyright to the computer program(s) herein is the property of TCC. // // The program(s) may be used and/or copied only with the written permission // // of TCC or in accordance with the terms and conditions stipulated in the // // agreement/contract under which the program(s) has been supplied. // // // /////////////////////////////////////////////////////////////////////////////// // // File: MobileL3_CC_Types.ttcn // Rev: R1B // Prodnr: CNL 113 832 // Contact: http://ttcn.ericsson.se // Reference: 3GPP TS 24.008 v13.4.0 module MobileL3_CC_Types { import from General_Types all; import from MobileL3_CommonIE_Types all; //============================================================================ // 24.008/ 10.5.4 Call control information elements //============================================================================ // 10.5.4.1 Extensions of codesets //-- // 10.5.4.2 Locking shift procedure //-- // 10.5.4.3 Non-locking shift procedure //-- // 10.5.4.4 Auxiliary states type record AuxiliaryStates_TLV { OCT1 elementIdentifier, //24'O LIN1 lengthIndicator, BIT2 mPTYAuxiliaryState, BIT2 holdAuxState, BIT3 spare_3, BIT1 ext //'1'B } with { variant (lengthIndicator) "LENGTHTO(mPTYAuxiliaryState,holdAuxState, spare_3,ext)"}; type record AuxiliaryStates_LV { LIN1 lengthIndicator, BIT2 mPTYAuxState, BIT2 holdAuxiliaryState, BIT3 spare_3, BIT1 ext //'1'B }with { variant (lengthIndicator) "LENGTHTO(mPTYAuxState,holdAuxiliaryState, spare_3,ext)"}; //24.008/ 10.5.4.4a Backup Bearer Capacity (BBC) type record BBC_octet3 { BIT3 informationTransferCapability, // '000'speech B // '001'B UDI // '010'B 3.audio 1kHz // '101'oITC B (see octet 5a) // '110'B speech auxiliary // '111'B reserved BIT1 transferMode, // '0'B mode circuit // '1'B packet mode BIT1 codingStandard, // '0'B GSM/PCS coding standardized // '1'B reserved BIT2 radioChannelRequirement, // '01'B MSC/VLR to MS; // '00'B MS (supports) towards MSC/VLR rate dual (half preferred) // '01'B MS (supports) towards MSC/VLR full only rate // '10'B rate dual (half preferred) // '11'B rate dual (full preferred) BIT1 extension_octet_3 //'0'B or '1'B (THe RAW encoder will overwrite this bit) } with { variant "EXTENSION_BIT (yes)"}; // "type record BC_octet4" is the same as "type record BC_octet4" type record BBC_octet5 { BIT3 signallingAccessProtocol, // '001'B I.440/450 // '010'B X.21 // '011'B X.28 dedicated PID, ind. NUI // '100'B X.28 dedicated PID, uni. NUI // '101'B X.28 PID non_dedicated // '110'B X.32 BIT2 rateAdaptation, // '00'B no adaptation rate (RA) // '01'B V.110/X.30 adaptation rate // '10'B CCITT X.31 flag stuffing // '11'B RA other (see octet 5a) BIT2 accessId, // '00'B identifier octet BIT1 extension_octet_5, // '0'B or '1'B (if no octet 5A following) //octet 5a BIT3 spare2_3 optional, // B'...._000 BIT2 otherRateAdaptation optional, // B'.._00.._ V.interworking 120 BIT2 otherInformationTransferCapability optional, // B'_00...._ interworking RDI BIT1 extension_octet_5a optional // '1'B } with { variant "EXTENSION_BIT (yes)"}; // BBC_octet6, BBC_octet7 not required type record BackupBearerCapacity { OCT1 elementIdentifier, LIN1 lengthIndicator, // the following octet fields representing an octet group BBC_octet3 octet3, // 1- BC_octet4 octet4 optional, //1 octet; opt. by def, but always fill in!!! BBC_octet5 octet5 optional, //1-2 octets BC_octet6 octet6 optional, //1-8 octets BC_octet7 octet7 optional //1 octet } with { variant (lengthIndicator) "LENGTHTO(octet3,octet4,octet5,octet6, octet7)"}; // 10.5.4.5 Bearer Capacity type record BC_octet7 { BIT5 userInformationLayer2Protocol, //octet 7: // '00110'B rec. X.25, level link // '01000'B ISO 6429 // '01001'B X.75 (teletex) // '01010'B profile Videotext // '01011'B FAX group 3 // '01100'COPnoF1Ct B // '01101'B X.75 (CAPI) BIT2 layer2Id, // '10'B identifier octet BIT1 extension_octet_7 // '1'B } with { variant "EXTENSION_BIT (yes)"}; type record BC_octet6 { BIT1 synchronous_asynchronous, // '0'synchronous B // '1'B asynchronous BIT4 userInformationLayer1Protocol, // '0000'B default layer protocol 1 BIT2 layer1Id, // '01'B identifier octet BIT1 extension_octet_6, // '0'B (octet 6a following) or '1'B // OCTET 6a: BIT4 userRate optional, // '0001'B 0.kbps 3 (X.1 and V.110) // '0010'B 1.kbps 2 (X.1 and V.110) // '0011'B 2.kbps 4 (X.1 and V.110) // '0100'B 4.kbps 8 (X.1 and V.110) // '0101'B 9.kbps 6 (X.1 and V.110) // '0110'B 12.0 transparent kbps // '0111'B 1.2 kbps/75bps asymmetric BIT1 numberDataBits optional, // '0'B bits 7 (data) // '1'B bits 8 (data) BIT1 negotiation optional, // '0'B inband negotiation possible not BIT1 numberStopBits optional, // '0'B bit 1 // '1'B 2 bits BIT1 extension_octet_6a optional, // '0'B or '1'B // OCTET 6b: BIT3 parity optional, // '000'odd B (number) // '010'even B // '011'B none // '100'B forced 0 to // '101'B forced to 1 BIT1 nicOnRX optional, // '0'B no data accepted clock with // '1'B data accepted with clock BIT1 nicOnTX optional, // '0'B no data required clock with // '1'B data required with clock BIT2 intermediateRate optional, // '00'reserved B // '01'B reserved // '10'B kbps 8 // '11'B 16 kbps BIT1 extension_octet_6b optional, // '0'B or '1'B // OCTET 6c: BIT5 modemType optional, // '00000'none B // '00001'B V.21 // '00010'B V.22 // '00011'B V.22bis // '00100'B V.23 // '00101'B V.26ter // '00110'B V.32 // '00111'B modem for interfaces undefined // '01000'B autobauding type 1 // '11111'B V.42 BIT2 connectionElement optional, // '00'transparent B (T) // '01'non_transparent B (NT) // '10'B both, preferred T // '11'B both, NT preferred BIT1 extension_octet_6c optional,//'0'B or '1'B no octet following 6d // OCTET 6d: BIT5 fixedNetworkUserRate optional, // '00000'B FNUR applicable not // '00001'B 9.kbps 6 (X.1 and V.110) // '00010'B 14.kbps 4 (X.1 and V.110) // '00011'B 19.kbps 2 (X.1 and V.110) // '00100'B 28.kbps 8 (X.1 and V.110) // '00101'B 38.kbps 4 (X.1 and V.110) // '00110'B 48.kbps 0 (X.1 and V.110) // '00111'B 56.kbps 0 (X.1 and V.110) // '01000'B 64.0 transparent kbps BIT2 otherModemType optional, //'00'B no other modem specified type // '11'B V.34 BIT1 extension_octet_6d optional,//'0'B or '1'B no octet following 6e // OCTET 6e: BIT3 maxNumberOfTrafficChannels optional, // '000'B TCH 1 // '001'B 2 TCH // '010'B TCH 3 // '011'B 4 TCH // '100'B TCH 5 // '110'B 6 TCH // '101'B TCH 7 // '111'B 8 TCH BIT4 acceptableChannelCodings optional,//'0'B TCH/F4.8 not acceptable // '1'B TCH/F4.8 acceptable // '0'B TCH/F9.6 not acceptable // '1'B TCH/F9.6 acceptable // '0'spare B // '0'B TCH/F14.4 not acceptable // '1'B TCH/F14.acceptable 4 BIT1 extension_octet_6e optional,//'0'B or '1'B _ no octet following 6d // OCTET 6f: BIT4 wantedAirInterfaceUserRate optional, //octet 6f (MS to MSC/VLR only): // '0000'B WAIUR applicable not // '0001'B 9.6 kbps // '0010'B 14.kbps 4 // '0011'B 19.2 kbps // '0100'B 19.kbps 2 // '0101'B 28.8 kbps // '0110'B 38.kbps 4 // '0111'B 43.2 kbps // '1000'B 57.kbps 6 // '1001'B 38.4 kbps // '1010'B 38.kbps 4 // '1011'B 38.4 kbps // '1101'B 38.kbps 4 BIT3 uimi optional, // '000'B user initiated mod. allowed not // '001'B UIMI allowed upto 1 TCH/F // '010'B UIMI allowed upto 2 TCH/F // '011'B UIMI allowed upto 3 TCH/F // '100'B UIMI allowed upto 4 TCH/F BIT1 extension_octet_6f optional,// '0'B or '1'B _ no octet following 6f BIT2 spare optional, //'00'B BIT2 asymetryIndication optional, // spare BIT3 acceptableChannelCodingsExt optional, // spare, set to 0 BIT1 extension_octet_6g optional // '1'B; } with { variant "EXTENSION_BIT (yes)"}; type record BC_octet5 { BIT3 signallingAccessProtocol, // '001'B I.440/450 // '010'B X.21 // '011'B X.28 dedicated PID, ind. NUI // '100'B X.28 dedicated PID, uni. NUI // '101'B X.28 PID non_dedicated // '110'B X.32 BIT2 rateAdaptation, // '00'B no adaptation rate (RA) // '01'B V.110/X.30 adaptation rate // '10'B CCITT X.31 flag stuffing // '11'B RA other (see octet 5a) BIT2 accessId, // '00'B identifier octet BIT1 extension_octet_5, // '0'B or '1'B (if no octet 5A following) BIT3 spare2_3 optional, // B'...._000 BIT2 otherRateAdaptation optional, // B'.._00.._ V.interworking 120 BIT2 otherInformationTransferCapability optional, // B'_00...._ interworking RDI BIT1 extension_octet_5a optional, // B'x......_ BIT1 spare3_1 optional, // B'......_0 BIT1 inbandNegotiation optional, BIT1 assignor_assignee optional, BIT1 lli optional, BIT1 mode optional, BIT1 multiframe optional, BIT1 hdrNohdr optional, BIT1 extension_octet_5b optional // B'x......_ } with { variant "EXTENSION_BIT (yes)"}; type record BC_octet4 { BIT1 establishment, // '0'demand B BIT1 nirr, // '0'B no associated meaning // '1'B data 4.8, FR, NT, 6.0 BIT1 configuration, // '0'B point point to BIT1 duplexMode, // '0'B duplex half // '1'B full duplex BIT2 structure, // '00'B service data integrity unit // '11'B unstructured BIT1 compresion, // '0'B no DC possible/allowed // '1'B DC possible/allowed BIT1 extension_octet_4 // '1'B } with { variant "EXTENSION_BIT (yes)"}; type record Speech_AuxiliarySpeech { BIT4 speechVersionIndication, //octet 3a (speech MS to MSC/VLR): // B'....0000 speech full rate 1 version // B'....0010 speech full rate version 2 // B'....0100 speech full rate 3 version // B'....0001 speech half rate version 1 // B'....0011 speech half rate 2 version // B'....0101 speech half rate version 3 BIT1 spare1_1, // B'..00.... BIT1 cTM_or_Spare, // CTM text telephony supported '1'B, not supported '0'B, or spare BIT1 coding, // B'_0...... extension octet ITC // B'_1...... other extension octet BIT1 extension_octet_3a_3b // B'x......_ } with { variant "EXTENSION_BIT (yes)"}; type set of Speech_AuxiliarySpeech Speech_AuxiliarySpeech_List with { variant "EXTENSION_BIT (yes)"}; type record BC_octet3 { BIT3 informationTransferCapability, // '000'speech B // '001'B UDI // '010'B 3.audio 1kHz // '101'oITC B (see octet 5a) // '110'B speech auxiliary // '111'B reserved BIT1 transferMode, // '0'B mode circuit // '1'B packet mode BIT1 codingStandard, // '0'B GSM/PCS coding standardized // '1'B reserved BIT2 radioChannelRequirement, // '01'B MSC/VLR to MS; // '00'B MS (supports) towards MSC/VLR rate dual (half preferred) // '01'B MS (supports) towards MSC/VLR full only rate // '10'B rate dual (half preferred) // '11'B rate dual (full preferred) BIT1 extension_octet_3, //'0'B or '1'B (THe RAW encoder will overwrite this bit) Speech_AuxiliarySpeech_List speech_aux_3a_3b optional } with { variant "EXTENSION_BIT (yes)"}; type record BearerCapability_TLV { OCT1 elementIdentifier, // '04'O LIN1 lengthIndicator, // 1..12 // the following octet fields representing an octet group BC_octet3 octet3, // 1- BC_octet4 octet4 optional, // 1 octet BC_octet5 octet5 optional, // 1-3 octets BC_octet6 octet6 optional, // 1-8 octets BC_octet7 octet7 optional // 1 octet } with { variant (lengthIndicator) "LENGTHTO (octet3, octet4, octet5, octet6, octet7)"}; type record BearerCapability_LV { LIN1 lengthIndicator, // 1..12 // the following octet fields representing an octet group BC_octet3 octet3, // 1- BC_octet4 octet4 optional, // 1 octet BC_octet5 octet5 optional, // 1-3 octets BC_octet6 octet6 optional, // 1-8 octets BC_octet7 octet7 optional // 1 octet } with { variant (lengthIndicator) "LENGTHTO (octet3, octet4, octet5, octet6, octet7)"}; //10.5.4.5a Call Control Capabilities type record CallControlCapabilities { OCT1 elementIdentifier, LIN1 lengthIndicator, BIT1 dTMF, BIT1 pCP, BIT1 eNICM, BIT1 mcat, BIT4 maxNumberOfSupportedBearers, BIT4 maxNumberOfSpeechBearers, BIT4 spare2 // '0000'B } with { variant (lengthIndicator) "LENGTHTO (dTMF,pCP,eNICM,mcat, maxNumberOfSupportedBearers,spare2)" }; //10.5.4.6 Call State type record CallState_V { BIT6 callStateValue, BIT2 codingStd }; type record CallState_TV { OCT1 elementIdentifier, BIT6 callStateValue, BIT2 codingStd }; //24.008/10.5.4.7 Called Party BCD Number type record CalledPartyBCD_Number { OCT1 elementIdentifier, // '5E'O LIN1 lengthIndicator, // 1..15 BIT4 numberingPlanIdentification, // '0000'unknown B // '0001'B ISDN/telephony // '0011'data B // '0100'B telex // '1000'national B // '1001'B private // '1111'B reserved extension for BIT3 typeOfNumber, // '000'unknown B // '001'B international number // '010'B number national // '011'B network specific number // '100'B dedicated access code short // '101'B reserved // '110'reserved B // '111'B reserved for extension BIT1 ext1, // '0'B or '1'B hexstring digits optional } with { variant (lengthIndicator) "LENGTHTO (numberingPlanIdentification, typeOfNumber, ext1, digits)"; variant (digits) "PADDING(yes)"; variant (digits) "PADDING_PATTERN('1'B)"}; //24.008/10.5.4.8 Called Party SubAddress type record CalledPartySubAddress { OCT1 elementIdentifier, // H'6D LIN1 lengthIndicator, // 0..21 BIT3 spare1_3 optional, // B'...._000 BIT1 odd_evenIndicator optional, // B'....0.._ even number of digits address // B'....1.._ odd number of address digits BIT3 typeOfSubAddress optional, // B'_000.... NSAP // B'_010.... specified user BIT1 ext1 optional, // B'1......_ OCTN subAddressInformation optional } with { variant (lengthIndicator) "LENGTHTO (spare1_3, odd_evenIndicator, typeOfSubAddress, ext1, subAddressInformation)"}; //10.5.4.9 Calling Party BCD Number type record CallingOrCalled_Number_oct3 { BIT4 numberingPlanIdentification, // Applies for type number of // = 000, 001, 010 and 100 // B'....Unknown 0000 // B'....0001 ISDN/telephony number plan // B'....0011 data numbering plan // B'....0100 telex numbering plan // B'....1000 national numbering plan // B'....1001 private numbering plan // B'....1111 reserved for extension BIT3 typeOfNumber, // B'_000.... Unknown // B'_001.... international number // B'_010.... national number // B'_011.... network specific number // B'_100.... dedicated access, short code // B'_101.... reserved // B'_110.... reserved // B'_111.... reserved for extension BIT1 ext1, // B'1......_ BIT2 screeningIndicator optional, // B'......00 User_provided, not screened // B'......01 User_provided, verified and passed // B'......10 User_provided, verified and failed // B'......11 Network provided BIT3 spare1_3 optional, // B'.._000.. BIT2 presentationIndicator optional, // B'_00 Presentation allowed // B'_01 Presentation restricted // B'_10 Number not available due to interworking // B'_11 Reserved BIT1 ext2 optional // B'1......_ } with { variant "EXTENSION_BIT (yes)"}; type record CallingPartyBCD_Number { OCT1 elementIdentifier, // '5C'O -table 9.70 LIN1 lengthIndicator, // 1..12 CallingOrCalled_Number_oct3 oct3, hexstring digits optional } with { variant (lengthIndicator) "LENGTHTO (oct3,digits)"; variant (digits) "PADDING(yes)"; variant (digits) "PADDING_PATTERN('1'B)"}; //10.5.4.10 Calling Party SubAddress type record CallingPartySubAddress { OCT1 elementIdentifier, // H'5D LIN1 lengthIndicator, // 0..21 BIT3 spare1_3 optional, // B'...._000 BIT1 odd_evenIndicator optional, // B'....0.._ even number of digits address // B'....1.._ odd number of address digits BIT3 typeOfSubAddress optional, // B'_000.... NSAP // B'_010.... specified user BIT1 ext1 optional, // B'1......_ OCTN subAddressInformation optional } with { variant (lengthIndicator) "LENGTHTO (spare1_3, odd_evenIndicator, typeOfSubAddress, ext1, subAddressInformation)"}; //24.008/10.5.4.11 Cause //moved into MobileL3_CommonIE_Types //24.008/10.5.4.11a/b type record CLIR { OCT1 elementIdentifier }; //24.008/10.5.4.12 Congestion level type record CongestionLevel { BIT4 congestionLevel, // '0000'B receiver ready // '1111'B receiver not ready BIT4 elementIdentifier }; type BIT4 CongestionLevelV; //24.008/10.5.4.13 Connected Number type record ConnectedNumber { OCT1 elementIdentifier, // H'4C LIN1 lengthIndicator, // 2..12 CallingOrCalled_Number_oct3 oct3, hexstring digits optional } with { variant (lengthIndicator) "LENGTHTO (oct3,digits)"; variant (digits) "PADDING(yes)"; variant (digits) "PADDING_PATTERN('1'B)"}; //**************************************************************************** type record ConnectedSubAddress { OCT1 elementIdentifier, // H'4D LIN1 lengthIndicator, // 0..21 BIT3 spare1_3 optional, // B'...._000 BIT1 odd_evenIndicator optional, // B'....0.._ even number of digits address // B'....1.._ odd number of address digits BIT3 typeOfSubAddress optional, // B'_000.... NSAP // B'_010.... specified user BIT1 ext1 optional, // B'1......_ OCTN subAddressInformation optional } with { variant (lengthIndicator) "LENGTHTO (spare1_3, odd_evenIndicator, typeOfSubAddress, ext1, subAddressInformation)" }; //10.5.4.15 Facility IE (see also 24.080/3.6 // moved to Mobile_L3_CommonIE_Types , because it is used by SS and CC // 10.5.4.16 HighLayerCompatibility type record HLC_octet3 { BIT2 presentationMethod, BIT3 interpretation, BIT2 codingStandard, BIT1 extension_octet_3 // '1'B octet4 should follow } with { variant "EXTENSION_BIT (yes)"}; type record HLC_octet4 { BIT7 highLayerCharId, BIT1 extension_octet_4, //octet4a: BIT7 extendedHighLayerCharId optional, BIT1 extension_octet_4a optional // '1'B } with { variant "EXTENSION_BIT (yes)"}; type record HighLayerCompatibility { OCT1 elementIdentifier, // H'7D LIN1 lengthIndicator, // 0..3 HLC_octet3 octet3 optional, HLC_octet4 octet4 optional // if octet3 used, octet4 should use, see 10.5.4.16.1 //replaced this: octetstring highLayerCompatibilityContents length(1..3) optional } with { variant (lengthIndicator) "LENGTHTO (octet3, octet4)"}; //10.5.4.17 Keypad Facility type record KeypadFacility { OCT1 elementIdentifier, // BIT7 keypadInformation, //IA5 char BIT1 spare_1 }; //10.5.4.18 Low Layer Compatibility // see also ITU Q.931 type record LowLayerCompatibility { OCT1 elementIdentifier, // H'7C LIN1 lengthIndicator, // 0..13 octetstring lowLayerCompatibilityContents length(2..16) optional //commented out to simplify the type /* BIT5 informationTransferCapability optional, BIT2 codingStandard optional, BIT1 ext1 optional, // B'x........ BIT6 spare1_6 optional, // B'..0000000 BIT1 negotiationIndicator optional, BIT1 ext2 optional, // B'x........ BIT5 informationTransferRate optional, BIT2 transferMode optional, BIT1 ext3 optional, // B'x........ BIT2 establishment optional, BIT2 configuration optional, BIT3 structure optional, BIT1 ext4 optional, // B'x........ BIT5 informationTransferRateDestOrig optional, BIT2 symetry optional, BIT1 ext5 optional, // B'x........ BIT5 userInformationLayer1Protocol optional, BIT2 layer1Identity optional, BIT1 ext6 optional, // B'x........ BIT5 userRate optional, BIT1 negotiation optional, BIT1 synchronous_asynchronous optional, BIT1 ext7 optional, // B'x........ BIT1 spare2_1 optional, // B'........0 BIT1 flowControlOnRX optional, BIT1 flowControlOnTX optional, BIT1 nicOnRX optional, BIT1 nicOnTX optional, BIT2 intermediateRate optional, BIT1 ext8 optional, // B'x........ BIT1 spare3_1 optional, // B'........0 BIT1 inband_outbandNegotiation optional, BIT1 assignor_assignee optional, BIT1 lliNegotiation optional, BIT1 mode optional, BIT1 multiFrameSupport optional, BIT1 hdrNohdr optional, BIT1 ext9 optional, // B'x........ BIT3 parity optional, BIT2 numberDataBits optional, BIT2 numberStopBits optional, BIT1 ext10 optional, // B'x........ BIT6 modemType optional, BIT1 duplexMode optional, BIT1 ext11 optional, // B'x........ BIT5 userInformationLayer2Protocol optional, BIT2 layer2Id optional, BIT1 ext12 optional, // B'x........ BIT5 userInformationLayer3Protocol optional, BIT2 layer3Id optional, BIT1 ext13 optional, // B'x........ BIT7 optionalLayer3ProtocolInformation optional, BIT1 ext14 optional // B'x........ */ } with { variant (lengthIndicator) "LENGTHTO (lowLayerCompatibilityContents)"}; //10.5.4.19 More Data /* type record MoreData { OCT1 elementIdentifier //'A0'O }; */ //10.5.4.20 NotificationIndicator type record NotificationIndicator { // OCT1 elementIdentifier, OCT1 notificationDescription // '80'O : user suspended // '81'O : user resumed // '82'O : bearer change }; //10.5.4.21 Progress Indicator type record ProgressIndicator_LV { LIN1 lengthIndicator, // '02'O BIT4 location, // '0000'user B // '0001'B private network, local user // '0010'B public network, user local // '0100'B public network, remote user // '0101'B private network, user remote // '1010'B Network beyond interworking pt. BIT1 spare1_1, // '0'B BIT2 codingStandard, // '00'B coding according Q.931 // '01'B reserved for standards other // '10'B National standard // '11'B standard other BIT1 ext1, // '1'B BIT7 progressDescription, //'0000001'B call is not end_to_end PLMN/ISDN // '0000010'B destination address is not PLMN/ISDN // '0000011'B origination address is not PLMN/ISDN // '0000100'B call has returned to the PLMN/ISDN // '0001000'B inband info available PLMN/ISDN // '0100000'B call is end_to_end PLMN/ISDN BIT1 ext2 // '1'B } with { variant (lengthIndicator) "LENGTHTO (location, spare1_1, codingStandard, ext1, progressDescription, ext2)"}; type record ProgressIndicator_TLV { OCT1 elementIdentifier, LIN1 lengthIndicator, // '02'O BIT4 location, // '0000'user B // '0001'B private network, local user // '0010'B public network, user local // '0100'B public network, remote user // '0101'B private network, user remote // '1010'B Network beyond interworking pt. BIT1 spare1_1, // '0'B BIT2 codingStandard, // '00'B coding according Q.931 // '01'B reserved for standards other // '10'B National standard // '11'B standard other BIT1 ext1, // '1'B BIT7 progressDescription, //'0000001'B call is not end_to_end PLMN/ISDN // '0000010'B destination address is not PLMN/ISDN // '0000011'B origination address is not PLMN/ISDN // '0000100'B call has returned to the PLMN/ISDN // '0001000'B inband info available PLMN/ISDN // '0100000'B call is end_to_end PLMN/ISDN BIT1 ext2 // '1'B // removed by ethbaat:ProgressIndicator_LV progressIndicator_LV } with { variant (lengthIndicator) "LENGTHTO (location, spare1_1, codingStandard, ext1, progressDescription, ext2)"}; //24.008/10.5.4.21a Recall Type type record RecallType { OCT1 elementIdentifier, BIT3 recallType, BIT5 spare_5 }; //24.008/10.5.4.21b Redirecting party BCD number type record RedirectingPartyBCDNumberTLV { OCT1 elementIdentifier, LIN1 lengthIndicator, CallingOrCalled_Number_oct3 oct3, hexstring digits optional } with { variant (lengthIndicator) "LENGTHTO (oct3,digits)"; variant (digits) "PADDING(yes)"; variant (digits) "PADDING_PATTERN('1'B)" }; //24.008/10.5.4.21c Redirecting party Subaddress type record RedirectingPartySubaddressTLV { OCT1 elementIdentifier, LIN1 lengthIndicator, BIT3 spare1_3 optional, // B'...._000 BIT1 odd_evenIndicator optional, // B'....0.._ even number of digits address // B'....1.._ odd number of address digits BIT3 typeOfSubAddress optional, // B'_000.... NSAP // B'_010.... specified user BIT1 ext1 optional, // B'1......_ OCTN subAddressInformation optional } with { variant (lengthIndicator) "LENGTHTO (spare1_3, odd_evenIndicator, typeOfSubAddress, ext1, subAddressInformation)"}; //24.008/10.5.4.22 Repeat Indicator type record RepeatIndicator { BIT4 RepeatIndication, BIT4 elementIdentifier }; //10.5.4.22a Reverse Call Setup Direction type record ReverseCallSetupDirection { OCT1 elementIdentifier }; //10.5.4.22b Setup Contatiner CCBS type record SetupContatinerCCBS { OCT1 elementIdentifier, LIN1 lengthIndicator, OCTN setupMessage } with { variant (lengthIndicator) "LENGTHTO (setupMessage)"}; type record SetupContatinerCCBS_LV { LIN1 lengthIndicator, OCTN setupMessage } with { variant (lengthIndicator) "LENGTHTO (setupMessage)"}; //10.5.4.23 Signal type record ML3_Signal { OCT1 elementIdentifier, // H'34 OCT1 signalValue // B'00000000 0. Dial tone on // B'00000001 1. Ring back on tone // B'00000010 2. Intercept tone on // B'00000011 3. Network congestion on tone // B'00000100 4. Busy tone on // B'00000101 5. Confirm on tone // B'00000110 6. Answer tone on // B'00000111 7. Call waiting on tone // B'00001001 9. Off_hook warning tone on // B'00111111 63. off Tones // B'01001111 79. Alerting off }; //10.5.4.24 SS Version Indicator //moved to MobileL3_CommonIE_Types //10.5.4.25 User-user type record User_user_LV { LIN1 lengthIndicator, OCT1 user_userProtocolDiscriminator, octetstring user_userInformation length(0..129) //transparent } with { variant (lengthIndicator) "LENGTHTO(user_userInformation)" }; type record User_user_TLV { OCT1 elementIdentifier, LIN1 lengthIndicator, OCT1 user_userProtocolDiscriminator, octetstring user_userInformation length(0..128) //transparent } with { variant (lengthIndicator) "LENGTHTO(user_userInformation)" }; type record User_userShort { OCT1 elementIdentifier, LIN1 lengthIndicator, OCT1 user_userProtocolDiscriminator, octetstring user_userInformation length(0..32) } with { variant (lengthIndicator) "LENGTHTO(user_userInformation)" }; //10.5.4.26 Alerting Pattern type record AlertingPattern { OCT1 elementIdentifier, //'19'O LIN1 lengthIndicator, BIT4 alertingPattern_FIELD, BIT4 spare } with { variant (lengthIndicator) "LENGTHTO (alertingPattern_FIELD,spare )"}; //10.5.4.27 Allowed Actions type record AllowedActions { OCT1 elementIdentifier, //'19'O LIN1 lengthIndicator, BIT7 spare_7, BIT1 ccbsActivation //'0'B activation is not possible //'1'B activation is possible } with { variant (lengthIndicator) "LENGTHTO (spare_7,ccbsActivation)"}; //10.5.4.28 Stream Identifier type record StreamIdentifier { OCT1 elementIdentifier, // '2D'O integer lengthf, // '01'O OCT1 streamIdentifierValue // value 0..255 } with { variant (lengthf) "LENGTHTO (streamIdentifierValue)"}; // 24.008/10.5.4.29 Network Call Control Capabilities type record NetworkCallControlCapabilities { OCT1 elementIdentifier, //'2F'O LIN1 lengthIndicator, BIT1 mcs, // multicall support '0'B: no support // '1'B :support BIT7 spare } with { variant (lengthIndicator) "LENGTHTO (mcs,spare)"}; //10.5.4.30 CauseofNoCli type record CauseofNoCli { OCT1 elementIdentifier, //'3A'O LIN1 lengthIndicator, OCT1 causeofNoCli_FIELD } with { variant (lengthIndicator) "LENGTHTO (causeofNoCli_FIELD)"}; //10.5.4.31 Immediate Modification Indicator // VOID // 10.5.4.33 Service Category (TLV) type record ServiceCategory { OCT1 elementIdentifier, LIN1 lengthIndicator, BIT7 emergencyServiceCategory, BIT1 spare_1 } with { variant (lengthIndicator) "LENGTHTO( emergencyServiceCategory, spare_1 )"}; // 10.5.4.34 REDIAL (T) type Type2 Redial; //10.5.4.35 Network Initiated Service Upgrade Indicator type record NetworkInitiatedServiceUpgradeIndicator { OCT1 elementIdentifier }; //============================================================================ // 20.008/9.3 Messages for circuit-switched call control (CC) //============================================================================ // 9.3.1.1 Alerting (NW->MS) //**************************************************************************** type record PDU_ML3_Alerting_NW_MS { BIT6 messageType, // '000001'Alerting B BIT2 nsd, Facility_TLV facility optional, ProgressIndicator_TLV progressIndicator optional, User_user_TLV user_user optional } with { variant "TAG ( facility, elementIdentifier = '1C'O; progressIndicator, elementIdentifier = '1E'O; user_user, elementIdentifier = '7E'O ) "} // 9.3.1.2 Alerting (MS->NW) //**************************************************************************** type record PDU_ML3_Alerting_MS_NW { BIT6 messageType, // B'..000001 (Alerting) BIT2 nsd, Facility_TLV facility optional, User_user_TLV user_user optional, SS_VersionIndicator ss_VersionIndicator optional } with { variant "TAG ( facility, elementIdentifier = '1C'O; user_user, elementIdentifier = '7E'O; ss_VersionIndicator, elementIdentifier = '7F'O ) "}; // 9.3.2 Call confirmed (MS->NW) //**************************************************************************** type record PDU_ML3_CallConfirmed { BIT6 messageType, // '001000'CallConfirmed B BIT2 nsd, RepeatIndicator repeatIndicator optional, // successive selection: //only present also if //BC1&BC2 are present // H'circular D1 // H'D3 sequential BearerCapability_TLV bearerCapability1 optional, BearerCapability_TLV bearerCapability2 optional, ML3_Cause_TLV cause optional, CallControlCapabilities cC_Capabilities optional, StreamIdentifier streamIdentifier optional, SupportedCodecList supportedCodecs optional } with { variant "TAG ( repeatIndicator, elementIdentifier = '1101'B; bearerCapability1, elementIdentifier = '04'O; bearerCapability2, elementIdentifier = '04'O; cause, elementIdentifier = '08'O; cC_Capabilities, elementIdentifier = '15'O; streamIdentifier, elementIdentifier = '2D'O;) "}; // 9.3.3 Call Proceeding (NW->MS) //**************************************************************************** type record PDU_ML3_CallProceeding { BIT6 messageType, // '000010'CallProceeding B BIT2 nsd, RepeatIndicator repeatIndicator optional, //successive selection: //only present also if //BC1&BC2 are present // H'circular D1 // H'D3 sequential BearerCapability_TLV bearerCapability1 optional, BearerCapability_TLV bearerCapability2 optional, Facility_TLV facility optional, ProgressIndicator_TLV progressIndicator optional, PriorityLevel_ML3 priorityGranted optional, NetworkCallControlCapabilities networkCCCapabilities optional //10.5.4.29 } with { variant "TAG ( repeatIndicator, elementIdentifier = '1101'B; bearerCapability1, elementIdentifier = '04'O; bearerCapability2, elementIdentifier = '04'O; facility, elementIdentifier = '1C'O; progressIndicator, elementIdentifier = '1E'O; priorityGranted, elementIdentifier = '1000'B; networkCCCapabilities, elementIdentifier = '2F'O;) "}; // 9.3.4 Congestion Control (NW->MS) //**************************************************************************** type record PDU_ML3_CongestionControl { BIT6 messageType, // '111001'B CongestionControl BIT2 nsd, CongestionLevelV congestionLevel, BIT4 spare_4, ML3_Cause_TLV cause optional } with { variant "TAG ( cause, elementIdentifier = '08'O )"}; // 9.3.5 Connect //**************************************************************************** // 9.3.5.1 Connect (NW->MS) type record PDU_ML3_Connect_NW_MS { BIT6 messageType, // '000111'B (Connect) BIT2 nsd, Facility_TLV facility optional, ProgressIndicator_TLV progressIndicator optional, ConnectedNumber connectedNumber optional, ConnectedSubAddress connectedSubAddress optional, User_user_TLV user_user optional } with { variant "TAG ( facility, elementIdentifier = '1C'O; progressIndicator, elementIdentifier = '1E'O; connectedNumber, elementIdentifier = '4C'O; connectedSubAddress, elementIdentifier = '4D'O; user_user, elementIdentifier = '7E'O ) "}; // 9.3.5.2 Connect (MS->NW) type record PDU_ML3_Connect_MS_NW { BIT6 messageType, // '000111'B (Connect) BIT2 nsd, Facility_TLV facility optional, ConnectedSubAddress connectedSubAddress optional, User_user_TLV user_user optional, SS_VersionIndicator ss_VersionIndicator optional, StreamIdentifier streamIdentifier optional } with { variant "TAG ( facility, elementIdentifier = '1C'O; connectedSubAddress, elementIdentifier = '4D'O; user_user, elementIdentifier = '7E'O; ss_VersionIndicator, elementIdentifier = '7F'O; streamIdentifier, elementIdentifier = '2D'O ) "}; // 9.3.6 Connect Ack (NW->MS) (MS->NW) //**************************************************************************** type record PDU_ML3_ConnectAck { BIT6 messageType, // '001111'B (ConnectAck) BIT2 nsd }; // 9.3.7 Disconnect //**************************************************************************** // 9.3.7.1 Disconnect (NW-MS) type record PDU_ML3_Disconnect_NW_MS { BIT6 messageType, // '100101'B (Disconnect) BIT2 nsd, ML3_Cause_LV cause, Facility_TLV facility optional, ProgressIndicator_TLV progressIndicator optional, User_user_TLV user_user optional, AllowedActions allowedActions optional } with { variant "TAG ( facility, elementIdentifier = '1C'O; progressIndicator, elementIdentifier = '1E'O; user_user, elementIdentifier = '7E'O; allowedActions, elementIdentifier = '7B'O ) "}; // 9.3.7.2 Disconnect (MS->NW) type record PDU_ML3_Disconnect_MS_NW { BIT6 messageType, // '100101'B (Disconnect) BIT2 nsd, ML3_Cause_LV cause, Facility_TLV facility optional, User_user_TLV user_user optional, SS_VersionIndicator ss_VersionIndicator optional } with { variant "TAG ( facility, elementIdentifier = '1C'O; user_user, elementIdentifier = '7E'O; ss_VersionIndicator, elementIdentifier = '7F'O ) "}; // 9.3.8 Emergency Setup (MS->NW ) //**************************************************************************** type record PDU_ML3_EmergencySetup { BIT6 messageType, // '001110'B BIT2 nsd, BearerCapability_TLV bearerCapability optional, StreamIdentifier streamIdentifier optional, SupportedCodecList supportedCodecs optional, ServiceCategory emergencyCategory optional } with { variant "TAG ( bearerCapability, elementIdentifier = '04'O; streamIdentifier, elementIdentifier = '2D'O; emergencyCategory, elementIdentifier = '2E'O; ) "}; // 9.3.9.1 (NW->MS) and 9.3.9.2 (MS->NW) Facility (CallControl!!!) //**************************************************************************** type record PDU_ML3_Facility { BIT6 messageType, // facilityIEI BIT2 nsd, Facility_LV facility, //10.5.4.15 SS_VersionIndicator ss_version optional // only for MS->NW } with { variant "TAG ( ss_version, elementIdentifier = '7F'O ) "}; //9.3.10 Hold (MS->NW) //**************************************************************************** type record PDU_ML3_Hold { BIT6 messageType, // '011000'Hold B BIT2 nsd }; //9.3.11 Hold Acknowledge (NW->MS) //**************************************************************************** type record PDU_ML3_HoldAcknowledge { BIT6 messageType, // '011001'B Acknowledge Hold BIT2 nsd }; //9.3.12 Hold Reject (NW->MS) //**************************************************************************** type record PDU_ML3_HoldReject { BIT6 messageType, //'011010'B BIT2 nsd, ML3_Cause_LV cause }; //9.3.13 Modify (MS->NW) (NW->MS) //**************************************************************************** type record PDU_ML3_Modify { BIT6 messageType, //'010111'B BIT2 nsd, BearerCapability_LV bearerCapability, LowLayerCompatibility lowLayerCompatibility optional, HighLayerCompatibility highLayerCompatibility optional, ReverseCallSetupDirection reverseCallSetupDirection optional, NetworkInitiatedServiceUpgradeIndicator networkInitiatedServiceUpgradeIndicator optional } with { variant "TAG ( lowLayerCompatibility, elementIdentifier = '7C'O; highLayerCompatibility, elementIdentifier = '7D'O; reverseCallSetupDirection, elementIdentifier = 'A3'O; networkInitiatedServiceUpgradeIndicator, elementIdentifier = 'A4'O ) "}; //9.3.14 Modify Complete (MS->NW) (NW->MS) //**************************************************************************** type record PDU_ML3_ModifyComplete { BIT6 messageType, //'011111'B BIT2 nsd, BearerCapability_LV bearerCapability, LowLayerCompatibility lowLayerCompatibility optional, HighLayerCompatibility highLayerCompatibility optional, ReverseCallSetupDirection reverseCallSetupDirection optional } with { variant "TAG ( lowLayerCompatibility, elementIdentifier = '7C'O; highLayerCompatibility, elementIdentifier = '7D'O; reverseCallSetupDirection, elementIdentifier = 'A3'O;) "}; //9.3.15 Modify Reject (MS->NW) (NW->MS) //**************************************************************************** type record PDU_ML3_ModifyReject { BIT6 messageType, //'010011'B BIT2 nsd, BearerCapability_LV bearerCapability, ML3_Cause_LV cause, LowLayerCompatibility lowLayerCompatibility optional, HighLayerCompatibility highLayerCompatibility optional } with { variant "TAG ( lowLayerCompatibility, elementIdentifier = '7C'O; highLayerCompatibility, elementIdentifier = '7D'O;) "}; //9.3.16 Notify (MS->NW) (NW->MS) //**************************************************************************** type record PDU_ML3_Notify { BIT6 messageType, //'111110'B BIT2 nsd, NotificationIndicator notificationIndicator }; // 9.3.17 Progress (NW->MS) //**************************************************************************** type record PDU_ML3_Progress { BIT6 messageType, // '000011'Progress B BIT2 nsd, ProgressIndicator_LV progressIndicator, User_user_TLV user_user optional } with { variant "TAG (user_user, elementIdentifier = '7E'O; ) "}; // 9.3.17a CC Establishment (NW->MS) //**************************************************************************** type record PDU_ML3_CC_Establishment { BIT6 messageType, // '000100' BIT2 nsd, SetupContatinerCCBS_LV container } // 9.3.17b CC Establishment Confirmed (MS->NW) //**************************************************************************** type record PDU_ML3_CC_EstablishmentConf { BIT6 messageType, // 'CC_EstablishmentConf' BIT2 nsd, RepeatIndicator repeatIndicator optional, BearerCapability_TLV bearerCapability1, BearerCapability_TLV bearerCapability2 optional, ML3_Cause_TLV cause optional, SupportedCodecList supportedCodecs optional } with { variant "TAG ( repeatIndicator, elementIdentifier = '1101'B; bearerCapability2, elementIdentifier = '04'O; cause, elementIdentifier = '08'O; ) "}; // 9.3.18.1 Release (NW->MS) //**************************************************************************** type record PDU_ML3_Release_NW_MS { BIT6 messageType, // '101101'Release B BIT2 nsd, ML3_Cause_TLV cause optional, ML3_Cause_TLV secondCause optional, Facility_TLV facility optional, User_user_TLV user_user optional } with { variant "TAG ( cause, elementIdentifier = '08'O; secondCause, elementIdentifier = '08'O; facility, elementIdentifier = '1C'O; user_user, elementIdentifier = '7E'O ) "}; // 9.3.18.2 Release (MS->NW) //**************************************************************************** type record PDU_ML3_Release_MS_NW { BIT6 messageType, // '101101'Release B BIT2 nsd, ML3_Cause_TLV cause optional, ML3_Cause_TLV secondCause optional, Facility_TLV facility optional, User_user_TLV user_user optional, SS_VersionIndicator ss_VersionIndicator optional } with { variant "TAG ( cause, elementIdentifier = '08'O; secondCause, elementIdentifier = '08'O; facility, elementIdentifier = '1C'O; user_user, elementIdentifier = '7E'O; ss_VersionIndicator, elementIdentifier = '7F'O ) "}; // 9.3.18a Recall (CCBS) (NW->MS) //**************************************************************************** type record PDU_ML3_Recall { BIT6 messageType, // '001011'Recall BIT2 nsd, RecallType recallType, Facility_LV facility }; // 9.3.19.1 Release Complete (NW->MS) //**************************************************************************** type record PDU_ML3_ReleaseComplete_NW_MS { BIT6 messageType, // '101010'B ReleaseComplete BIT2 nsd, ML3_Cause_TLV cause optional, Facility_TLV facility optional, User_user_TLV user_user optional } with { variant "TAG ( cause, elementIdentifier = '08'O; facility, elementIdentifier = '1C'O ; user_user, elementIdentifier = '7E'O ) "}; // 9.3.19.2 Release Complete (MS->NW) //**************************************************************************** type record PDU_ML3_ReleaseComplete_MS_NW { BIT6 messageType, // '101010'B (ReleaseComplete) BIT2 nsd, ML3_Cause_TLV cause optional, Facility_TLV facility optional, User_user_TLV user_user optional, SS_VersionIndicator ss_VersionIndicator optional } with { variant "TAG ( cause, elementIdentifier = '08'O; facility, elementIdentifier = '1C'O; user_user, elementIdentifier = '7E'O; ss_VersionIndicator, elementIdentifier = '7F'O ) "}; //9.3.20 Retrieve (MS->NW) //**************************************************************************** type record PDU_ML3_Retrieve { BIT6 messageType, //'011100'B BIT2 nsd }; //9.3.21 Retrieve Acknowledge (NW->MS) //**************************************************************************** type record PDU_ML3_RetrieveAck { BIT6 messageType, //'011101'B BIT2 nsd }; //9.3.22 Retrieve Reject (NW->MS) //**************************************************************************** type record PDU_ML3_RetrieveRej { BIT6 messageType, //'011110'B BIT2 nsd, ML3_Cause_LV cause }; // 9.3.23.1 Setup NW->MS //**************************************************************************** type record PDU_ML3_Setup_NW_MS { BIT6 messageType, // '000101'B (Setup) BIT2 nsd, RepeatIndicator bcRepeatIndicator optional, // successive selection: // only present also if // BC1&BC2 are present // H'circular D1 // H'D3 sequential BearerCapability_TLV bearerCapability1 optional, BearerCapability_TLV bearerCapability2 optional, Facility_TLV facility optional, ProgressIndicator_TLV progressIndicator optional, ML3_Signal signal optional, CallingPartyBCD_Number callingPartyBCD_Number optional, CallingPartySubAddress callingPartySubAddress optional, CalledPartyBCD_Number calledPartyBCD_Number optional, CalledPartySubAddress calledPartySubAddress optional, RedirectingPartyBCDNumberTLV redirectingPartyBCDNumber optional, RedirectingPartySubaddressTLV redirectingPartySubaddress optional, RepeatIndicator llc_RepeatIndicator optional, // H'circular D1 // H'D3 sequential LowLayerCompatibility lowLayerCompatibility1 optional, LowLayerCompatibility lowLayerCompatibility2 optional, RepeatIndicator hlc_RepeatIndicator optional, // H'circular D1 // H'D3 sequential HighLayerCompatibility highLayerCompatibility1 optional, HighLayerCompatibility highLayerCompatibility2 optional, User_userShort user_user optional, PriorityLevel_ML3 priority optional, AlertingPattern alert optional, //10.5.4.26 NetworkCallControlCapabilities networkCCCapabilities optional, //10.5.4.29 CauseofNoCli causeofNoCli optional, //10.5.4.30 BackupBearerCapacity backupBearerCapacity optional //10.5.4.4a } with { variant "TAG ( bcRepeatIndicator, elementIdentifier = '1101'B; bearerCapability1, elementIdentifier = '04'O; bearerCapability2, elementIdentifier = '04'O; facility, elementIdentifier = '1C'O; progressIndicator, elementIdentifier = '1E'O; signal, elementIdentifier = '34'O; callingPartyBCD_Number, elementIdentifier = '5C'O; callingPartySubAddress, elementIdentifier = '5D'O; calledPartyBCD_Number, elementIdentifier = '5E'O; calledPartySubAddress, elementIdentifier = '6D'O; redirectingPartyBCDNumber, elementIdentifier = '74'O; redirectingPartySubaddress, elementIdentifier = '75'O; llc_RepeatIndicator, elementIdentifier = '1101'B; lowLayerCompatibility1, elementIdentifier = '7C'O; lowLayerCompatibility2, elementIdentifier = '7C'O; hlc_RepeatIndicator, elementIdentifier = '1101'B; highLayerCompatibility1, elementIdentifier = '7D'O; highLayerCompatibility2, elementIdentifier = '7D'O; user_user, elementIdentifier = '7E'O; priority, elementIdentifier = '1000'B; alert, elementIdentifier = '19'O; networkCCCapabilities, elementIdentifier = '2F'O; causeofNoCli, elementIdentifier = '3A'O; backupBearerCapacity, elementIdentifier = '41'O ) "}; // 9.3.23.2 Setup MS->NW //**************************************************************************** type record PDU_ML3_Setup_MS_NW { BIT6 messageType, // '000101'B (Setup) BIT2 nsd, RepeatIndicator bcRepeatIndicator optional, // successive selection: // only present also if // BC1&BC2 are present // H'circular D1 // H'D3 sequential BearerCapability_TLV bearerCapability1, //mandatory!! BearerCapability_TLV bearerCapability2 optional, Facility_TLV facility optional, CallingPartySubAddress callingPartySubAddress optional, CalledPartyBCD_Number calledPartyBCD_Number, //mandatory!! CalledPartySubAddress calledPartySubAddress optional, RepeatIndicator llc_RepeatIndicator optional, // H'circular D1 // H'D3 sequential LowLayerCompatibility lowLayerCompatibility1 optional, LowLayerCompatibility lowLayerCompatibility2 optional, RepeatIndicator hlc_RepeatIndicator optional, // H'circular D1 // H'D3 sequential HighLayerCompatibility highLayerCompatibility1 optional, HighLayerCompatibility highLayerCompatibility2 optional, User_userShort user_user optional, SS_VersionIndicator ss_VersionIndicator optional, CLIR clir_Suppression optional, // H'A1 CLIR clir_Invocation optional, // H'A2 CallControlCapabilities cC_Capabilities optional, Facility_TLV facility_ccbs1 optional, Facility_TLV facility_ccbs2 optional, StreamIdentifier streamIdentifier optional, SupportedCodecList supportedCodecs optional, Redial redial optional } with { variant "TAG ( bcRepeatIndicator, elementIdentifier = '1101'B; //bearerCapability1, elementIdentifier = '04'O; bearerCapability2, elementIdentifier = '04'O; facility, elementIdentifier = '1C'O; callingPartySubAddress, elementIdentifier = '5D'O; //calledPartyBCD_Number, elementIdentifier = '5E'O; calledPartySubAddress, elementIdentifier = '6D'O; llc_RepeatIndicator, elementIdentifier = '1101'B; lowLayerCompatibility1, elementIdentifier = '7C'O; lowLayerCompatibility2, elementIdentifier = '7C'O; hlc_RepeatIndicator, elementIdentifier = '1101'B; highLayerCompatibility1, elementIdentifier = '7D'O; highLayerCompatibility2, elementIdentifier = '7D'O; user_user, elementIdentifier = '7E'O; ss_VersionIndicator, elementIdentifier = '7F'O; clir_Suppression, elementIdentifier = 'A1'O; clir_Invocation, elementIdentifier = 'A2'O; cC_Capabilities, elementIdentifier = '15'O; facility_ccbs1, elementIdentifier = '1D'O; facility_ccbs2, elementIdentifier = '1B'O; streamIdentifier, elementIdentifier = '2D'O; redial, elementIdentifier = 'A3'O; ) "}; //9.3.23a StartCC (MS->NW) //**************************************************************************** type record PDU_ML3_StartCC { BIT6 messageType, //''B; BIT2 nsd, CallControlCapabilities cC_Capabilities optional } with { variant "TAG (cC_Capabilities, elementIdentifier = '15'O;) "}; // 9.3.24 Start DTMF (MS->NW) //**************************************************************************** type record PDU_ML3_StartDTMF { BIT6 messageType, //'110101'B; BIT2 nsd, KeypadFacility keypadFacility }; // 9.3.25 Start DTMF Acknowledge (NW->MS) //**************************************************************************** type record PDU_ML3_StartDTMFAck { BIT6 messageType, //'110110'B; BIT2 nsd, KeypadFacility keypadFacility }; // 9.3.26 Start DTMF Reject (NW->MS) //**************************************************************************** type record PDU_ML3_StartDTMFRej { BIT6 messageType, //'110111'B; BIT2 nsd, ML3_Cause_LV cause }; // 9.3.27 Status (NW->MS) (MS->NW) //**************************************************************************** type record PDU_ML3_Status { BIT6 messageType, //'111101'B; BIT2 nsd, ML3_Cause_LV cause, CallState_V callState, AuxiliaryStates_TLV auxiliaryStates optional //'24'O } with { variant "TAG (auxiliaryStates,elementIdentifier ='24'O ) " }; // 9.3.28 Status enquiry (NW->MS) (MS->NW) //**************************************************************************** type record PDU_ML3_StatusEnquiry { BIT6 messageType, //'110100'B; BIT2 nsd }; // 9.3.29 Stop DTMF (MS->NW) //**************************************************************************** type record PDU_ML3_StopDTMF { BIT6 messageType, //'110001'B; BIT2 nsd }; // 9.3.30 Stop DTMF Ack (NW->MS) //**************************************************************************** type record PDU_ML3_StopDTMFAck { BIT6 messageType, //'110010'B; BIT2 nsd }; // 9.3.31.1 User Information //**************************************************************************** type record PDU_ML3_UserInformation { BIT6 messageType, //'010000'B; BIT2 nsd, User_user_LV user_user, OCT1 moreData optional }; // ************************************************************************** // * 9.3 Call Control Messages (MS->MSC) // * Ref:(24.008/Table 9.54 (order) and Table 10.3(messageType values) ) // ************************************************************************** type union PDU_ML3_CC_MS_NW { PDU_ML3_Alerting_MS_NW alerting_MS_NW, //Call establishment PDU_ML3_CallConfirmed callConfirmed, PDU_ML3_Connect_MS_NW connect_MS_NW, PDU_ML3_ConnectAck connectAck, PDU_ML3_EmergencySetup emergencySetup, PDU_ML3_CC_EstablishmentConf cc_EstablishmentConf, PDU_ML3_StartCC startCC, PDU_ML3_Setup_MS_NW setup_MS_NW, PDU_ML3_Modify modify, //call information phase msg PDU_ML3_ModifyComplete modifyComplete, PDU_ML3_ModifyReject modifyReject, PDU_ML3_UserInformation userInformation, PDU_ML3_Disconnect_MS_NW disconnect_MS_NW,//call clearing PDU_ML3_Release_MS_NW release_MS_NW, PDU_ML3_ReleaseComplete_MS_NW releaseComplete_MS_NW, PDU_ML3_Facility facility,//for Suppl.Service contr. PDU_ML3_Hold hold, PDU_ML3_Retrieve retrieve, PDU_ML3_Notify notify,//misc PDU_ML3_StartDTMF startDTMF, PDU_ML3_Status status, PDU_ML3_StatusEnquiry statusEnquiry, PDU_ML3_StopDTMF stopDTMF } with { variant "TAG ( alerting_MS_NW, messageType ='000001'B;//call establish callConfirmed, messageType ='001000'B; connect_MS_NW, messageType ='000111'B; connectAck, messageType ='001111'B; emergencySetup, messageType ='001110'B; cc_EstablishmentConf, messageType ='000110'B; startCC, messageType ='001001'B; setup_MS_NW, messageType ='000101'B; modify, messageType ='010111'B;//call inf.ph.msg modifyComplete, messageType ='011111'B; modifyReject, messageType ='010011'B; userInformation, messageType ='010000'B; disconnect_MS_NW, messageType ='100101'B;//call clearing release_MS_NW, messageType ='101101'B; releaseComplete_MS_NW, messageType ='101010'B; facility, messageType ='111010'B;//messages for SS hold, messageType ='011000'B; retrieve, messageType ='011100'B; notify, messageType ='111110'B; //misc startDTMF, messageType ='110101'B; status, messageType ='111101'B; statusEnquiry, messageType ='110100'B; stopDTMF, messageType ='110001'B; )" }; // *************************************************************************** // * 9.3 Call Control Messages MSC -> MS (24.008/Table 9.54 and Table 10.3) // *************************************************************************** type union PDU_ML3_CC_NW_MS { PDU_ML3_Alerting_NW_MS alerting_NW_MS, //call establish PDU_ML3_CallConfirmed callConfirmed, PDU_ML3_CallProceeding callProceeding, PDU_ML3_Connect_NW_MS connect_NW_MS, PDU_ML3_ConnectAck connectAck, PDU_ML3_Progress progress, PDU_ML3_CC_Establishment cc_Establishment, //PDU_ML3_Recall recall, PDU_ML3_Setup_NW_MS setup_NW_MS, PDU_ML3_Modify modify, //call information phase msg PDU_ML3_ModifyComplete modifyComplete, PDU_ML3_ModifyReject modifyReject, PDU_ML3_UserInformation userInformation, PDU_ML3_Disconnect_NW_MS disconnect_NW_MS, PDU_ML3_Release_NW_MS release_NW_MS, PDU_ML3_ReleaseComplete_NW_MS releaseComplete_NW_MS, PDU_ML3_Facility facility, //for Suppl.Service contr. PDU_ML3_HoldAcknowledge holdAcknowledge, PDU_ML3_HoldReject holdReject, PDU_ML3_RetrieveAck retrieveAck, PDU_ML3_RetrieveRej retrieveRej, PDU_ML3_CongestionControl congestionControl, //misc PDU_ML3_Notify notify, PDU_ML3_StartDTMFAck startDTMFAck, PDU_ML3_StartDTMFRej startDTMFRej, PDU_ML3_Status status, PDU_ML3_StatusEnquiry statusEnquiry, PDU_ML3_StopDTMFAck stopDTMFAck } with { variant "TAG ( alerting_NW_MS, messageType ='000001'B;//Call establishment callConfirmed, messageType ='001000'B; callProceeding, messageType ='000010'B; connect_NW_MS, messageType ='000111'B; connectAck, messageType ='001111'B; progress, messageType ='000011'B; cc_Establishment, messageType ='000100'B; //recall, messageType ='001011'B; setup_NW_MS, messageType ='000101'B; modify, messageType ='010111'B;//call inf.ph.msg modifyComplete, messageType ='011111'B; modifyReject, messageType ='010011'B; userInformation, messageType ='010000'B; disconnect_NW_MS, messageType ='100101'B;//call clearing release_NW_MS, messageType ='101101'B; releaseComplete_NW_MS, messageType ='101010'B; facility, messageType ='111010'B;//for SS contr. holdAcknowledge, messageType ='011001'B; holdReject, messageType ='011010'B; retrieveAck, messageType ='011101'B; retrieveRej, messageType ='011110'B; congestionControl, messageType ='111001'B;//misc notify, messageType ='111110'B; startDTMFAck, messageType ='110110'B; startDTMFRej, messageType ='110111'B; status, messageType ='111101'B; statusEnquiry, messageType ='110100'B; stopDTMFAck, messageType ='110010'B; )" }; }//end of module with { extension "version R1B" encode "RAW" }