Fix SCCPlite run of TC_cm_reestablishment.
I'm not sure why it works for AoIP before this patch, but now it works
for both SCCPlite and AoIP.
Related: SYS#5130
Change-Id: I1c87272c5bb1ac452927054a9eef104d795e02f8
Avoid test breakage in ttcn3-bsc-test-sccplite, due to different
osmo-bsc configuration.
Related: SYS#5542
Change-Id: Iaf976ac12dbb2ee1930a7acfcf3cb452db34beed
Add two new tests to verify occupied and available PDCH stats if MS is
not known by the PCU.
Related: SYS#4878
Change-Id: Id21d4056a21b73ff612956700d2056d838eb54f8
Extend the test to verify that TTCN3.bts.0.pdch.occupied.gprs and
TTCN3.bts.0.pdch.occupied.egprs work as expected. These new stats are
needed for performance measurements in 3GPP TS 52.402 § B.2.1.54-55.
Related: SYS#4878
Depends: osmo-pcu I0c0a1121b4ae5f031782e7e63a0c28eb0b6c8b42
Change-Id: Ia98de17187810acb2e1b327c37beab79a0c211b8
Enable multiple TRX to verify that counters work as expected if the
allocator spreads TBFs over multiple TRX.
Related: SYS#4878
Change-Id: Ibde5be120e893fcecceb72a888483d5a6bb8ce50
New versions of osmo-pcu support Neighbor Address Resolution over this
interface, and deprecated the old CTRL interface.
Let's use it by default while still keeping support for the old one for
a while to avoid breakage of existing deployments.
Tests run to validate:
* Old osmo-pcu still passes tests using CTRL interface
* New osmo-pcu (with new iface support) still passes tests using CTRL
interface
* New osmo-pcu (with new iface support) passes tests using new iface
Related: SYS#4971
Change-Id: I05f1aabc64fc5bc4740b0d8afd8990b485eacd50
I want to add tests that verify the stat items reflecting the MSC
connection status. To be able to run a test expecting fewer connected
MSC after a test that launched more MSCs requires the links to be reset.
Related: SYS#5542
Depends: I1975941b790d2b30d0904d41e456220cba26ecff (osmo-bsc)
Change-Id: Ice3056dc46c94f9399f8379db7aeb7193782f2f2
Add a delay between sending the RSL Conn Fail IND and checking the stats
values, so that osmo-bsc has a good chance of receiving the message and
promoting the failure into the stats values first.
Even though jenkins shows no failures, when testing locally, this test
fails a lot for me without that bit of delay.
Change-Id: Iaf0173239528337283b23f70840d36ad25f14950
Also test the early IA feature for non-dyn TS in 'pre-ts-ack' mode, for
completeness' sake.
Related: SYS#5559
Change-Id: I6ba84b4b618dd99ec2095aaf611209e525f2b5f4
Tests have shown that the Training Sequence Set was not correct in early
IMM ASS messages. Add validation of the TSC and ARFCN in IMM ASS
messages for all early IA related tests. This makes the tests fail.
Related osmo-bsc patch linked below makes the tests pass again.
Related: SYS#5559
Related: I9f26074154600d854a0b3baee2f38a6666f4cb56 (osmo-bsc)
Change-Id: I4479244b0c53648e62e84e1ebf986f51d659484f
This TC produces an abort of the ns2 dummy by the memory sanitizer.
Test if SNS fails when removing a bind which has the last valid connection.
The ns2 has 2 binds, ttcn3 1 bind. There are 2 NSVCs.
Bind -- NSVCs -- Bind.
(ns2) (ttcn3)
1*-----------*1
/
2*-broken--/
Remove the 1st ns2 bind after the other NSVC has failed.
Change-Id: I8f7daee7a3bcadf64e8ae607619425adbefe3c4b
Test new stats bts.N.pdch.available/occupied, which count available
PDCHs (3GPP TS 52.402 § B.2.1.38) as well as occupied PDCHs
(§ B.2.1.42-44).
Related: SYS#4878
Related: osmo-pcu I74760a68ee055510a79e80854ec7bf1521669119
Change-Id: I607b4729740159c161af824317f9fc04878eb13d
1. do SNS configuration
2. add a bind
3. receive the SNS_ADD
4. before answering the SNS_ADD, change the weight via vty and remove the bind
Change-Id: I1a3d2273279f3def0d225ba78d400fb52a958c64
The test case tests the wrong side. The signalling
and data weight are valid for the other side. The correct
test case needs to add a second bind on the ttcn3 side because
the signalling and data weight is valid for the remote side.
Change-Id: Ice79a038b0b8df9e69232bb24b2f2b18b3632758
Allow the .cfg to define which tests should be run.
The new SGSN role SNS tests have their own configurations for
TTCN3 and osmo-nsdummy.
Change-Id: If8162f256428e2e1f353ffbf42a7c0cd24bcecd9
The mentioned bug was fixed 3 years ago, and there are already lots of
tests below so remove the comment.
Related: OS#3182
Change-Id: I3df4dbd1647dae78eccd31c49c3aec3cf9e12a6f
The module parameter mp_test_ip was added with the following commit:
Change-Id I61e23e264bc85eb36d07431c7839fb445c110947
There is already mp_local_ipv4, which has the same function, so we
should remove mp_test_ip again and use mp_local_ipv4 to set up the
receiving of statsd information.
Change-Id: I70f33aed4102c67118cc6701c2578a70c0dfe604
Related: SYS#5535
Test the experimental 'immediate-assignment pre-ts-ack' implemented in
I19e6a3d614aa5ae24d64eed96caf53e6f0e8bb74
Related: SYS#5559
Change-Id: I2ae28cd92910d4bc341a88571599347a64a18fe5
Add tests for the new early IMM ASS feature in osmo-bsc:
'immediate-assignment (post-chan-ack|pre-chan-ack)'
Related: 0b44493d3de03d2750527e224df67b473fe39f93 (osmo-bsc)
Related: SYS#5559
Change-Id: If71f4562d532b6c5faf55f5fd073449a8a137ebf
The recently added test TC_dlcx_wildcarded depends on statsd information
from osmo-mgw but in the osmo-mgw configuration no statsd is configured.
Change-Id: I35e07a6b1853234559ab4d7e044f3899e8d0a3e8
Related: SYS#5535
Prepare to use this shared function in a new test with additional
commands between init, the function and shutdown.
Related: SYS#4878
Change-Id: I6fd523c7f5ab496b3356cf896a8ceaf9b6e874d2
Disable test TC_rkm_unreg_never_registered for current latest version of
osmo-stp (1.4.0), as it does not clean up properly and now causes other
tests to fail.
With this patch, test results for -latest are restored to how it was
before I7d2f9eb298778a8e60c7e73f314bc73528e85406 and
I31fcba85d23a8767eb0ceb513ff5b440558a475b were merged.
Related: OS#4239
Change-Id: Ice8fe9597a0a12eb4ec26172982a0f5cd01a148b
Rename the option to mp_osmo_stp_newer_than_1_4_0, because I'm going to
use the variable in the next patch for something unrelated to the asp
quirk and so we can avoid introducing another variable.
Related: docker-playground I6a32398242b53c827a94cf65e4a35900a7c4171a
Related: OS#4239
Change-Id: I43b1aa2c029c88c88320d40f60df46a5eb6c4c24
The TC_idle() won't be call by the control as this TC is only intended for manual
human based testing.
Change-Id: Ie1b5936447755dcaebd65396b7bb5cc3f31c17b5