Add tests to play through various neighbor configurations.
Tests will pass as soon as osmo-bsc I29bca59ab232eddc74e0d4698efb9c9992443983
is merged.
Add RSL2 to allow triggering handover to BTS 2.
Adjust osmo-bsc.cfg to match the new tests. Also applied in docker-playground
I1c57a04747f5ec004ccf4657954dcb0b003c24fc.
- Actually enable handover.
- Add bts 3
Depends: osmo-bsc I8623ab581639e9f8af6a9ff1eca990518d1b1211 ('no neighbors')
Related: OS#4056
Change-Id: Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
Some of our files didn't have a copyright notice at all, let's add
it. Also, update the notices in other files and ensure a SPDX
identifier is present in all but the most trivial files.
Change-Id: If7fa19ce484b415bc645e39b3d0d666b44b5f0fd
We cannot notify RSL Emulation layer about expecting a specific FN
(during ts_RSLDC_ChanRqd) because we only know the FN after sending the
RACH request, and since notification to RSL Emulation happens async, it
can happen (verified) that ChanRqd message from BTS arrives and is
handled before we register the RACH req into the ConnectionTable.
Change-Id: I438fd3ee82d88498d928dbcc89ce9bd80d37ab64
Otherwise RSL layer fails this way when this event is received:
RSL_Emulation.ttcn:429 Receive operation on port IPA_PT succeeded, message from TC_chan_act_a51-RSL-IPA(3): @IPA_Emulation.ASP_IPA_Event: { up_down := ASP_IPA_EVENT_DOWN (0) } id 9
- Function main_client was stopped. PTC terminates.
RSL_Emulation.ttcn:429 Message with id 9 was extracted from the queue of IPA_PT.
RSL_Emulation.ttcn:430 setverdict(fail): none -> fail reason: "Received unknown primitive from IPA", new component reason: "Received unknown primitive from IPA"
We now fail with a clearer message "Lost IPA connection!". These
failures seem to happen under high load when the BTS doesn't get a
steady clock from osmo-trx.
Change-Id: Idc6565c9de72d98015d56a41e5616c46051c8a8d
This will prevent subsequent failures from overwriting the verdict so we
can easily see the root cause of the test failure.
Using testcase.stop instead for errors internal to our test
infrastructure to mark them as test errors instead of failed.
Change-Id: Idc6819aaf0b01e70c38fad828dd44dcec6bdd778
procedure ports (like message ports) require us to specify the
destination of a message ("reply") in case it is connected 1:N and not
just 1:1. This didn't show up as a problem so far, as we typically only
had one component talking to those procedure ports at any given point
in time.
Change-Id: I696ec67080815348bb95e43ecbbf262e533e39a3
In I483ddd45c1cf631a5a9d8f862b6ca728b38bdc14 we introduced code
that makes the IPA_Emulation code to emut an ASP_IPA_EVENT_ID_ACK
[also] to the RSL port, irrespective of client/server status.
However, RSL_Emulation only handled this event in the BTS role
for BSC testing, but not in in the BSC role for BTS testing.
Change-Id: I99a5c58ea8d1e74b2ad51aed23009af6322a1007
Don't use explicit log() statements for normal message forwarding
between ports. This will be visible in the automatically-generated log
statements anyway...
Change-Id: Idcfb1897dd00df1839cf1a0182a5a030bf71c0cb
The LastActTable stores a copy of the decoded RSL CHAN_ACT for
each channel number. This can be used by a RSL_DchanHandler to
learn parameters of its own activation.
Change-Id: I629d66e27cbe4c8b02e704a7181b3bff843e9aa4
So far we only dispatched received Common Channel messages from the
wire / IUT into the CCHAN_PT. Now the tester can also send Common
Channel messages back to the wire / IUT.
Change-Id: If3d5516c14ea3fbbd8c3de35eaa8ea5f18a00933
When emulating the BSC side of RSL, this can be used by a test case
to wait for the RSL connection to be established.
Change-Id: Iad2f6e4cb6a8f3b77e452f36a83ec11e7554e6c7
So far we assumed we emulate the BTS side and talk to a BSC.
Let's make this configurable and disable the BTS-side spcific code
paths by means of a 'bts_role' boolean type.
Change-Id: I0d0460cbb633b470f6117d07643f68aefb1530eb
We introduce a procedure by which any DchanHandler can globally
disable all receiving/processing of DChan related messages. This is
required in upcoming handover code, as we need to block handling
of messages such as RSL IPAC CRCX on the new Dchan before we have
processed the RR HANDOVER CMD and raised an associated expect here in
the RSL emulation code.
Change-Id: Ibef65f87d0d481accbc0e019874dd43b3f9a5dbc
Also, extend RSLEM_{register,unregister}() with an optional third
argiment, so the RSL_DchanHdlr can register 'expect' also for
that secondary BTS/port during hand-over
Change-Id: Ic22778f17dc4b93ef54837cf400ddd7d1732ae7e
During assignment or hand-over, a given TTCN-3 component may be
interested in registering more than one channel number. Add an explicit
procedure port with associated registration procedure, similar to what
we already do in GSUP, MNCC and others.
Change-Id: Iba37bf9541c779b79e179f995cdfa677633fadeb
By default all the elements in the conn table seem to be considered
<unbound>.
f_cid_create() manages to set ra, ra_fn and comp_ref in the
ConnectionData element, but checking for
ispresent(ConnectionTable[i].ra) still returns false while
log(ConnectionTable[i].ra) returns 23. Setting every optional element to
omit as f_cid_clear() does before using the connection table seems to
solve this issue.
The assignment_fr_* tests now continue after receiving the Immediate
Assignment, but still fail after receiving the CM Service Request.
Change-Id: I24205425c5b6ae5b8a0f6288ba89ea5a1dc4669d
The existing tests were implemented directly on top of the BSSMAP
and RSL CodecPorts. If we loop in the RSL_Emulation and
BSSMAP_Emulation components, we can properly multiplex/demultiplex
multiple MS (radio channels) on both the RSL and the MSC (SCCP
connection) side.
In order to have a single component that handles both the RSL and the
BSSAP side of a given channel/subscriber/call, we introduce the concept
of BSSMAP "Expects", where the test csse can register the L3 INFO that
it sends in the RLL ESTablish INDication on the RSL side, so the BSSMAP
handler cna route the BSC-originated SCCP connection with that L3 INFO
back to the same component. This is a bit inspired "in spirit" of the
"expect" mechanism of netfilter connection tracking.
Change-Id: I71f777cd4f290422fa68897952b6505875e35f0e
Neels Hofmeyr
Harald Welte
Pau Espin
Daniel Willmann