Extend BSC_ConnHdlr with new check IMEI related parameters. Add tests
for check IMEI and check IMEI early for multiple auth variations, as
well as variants where the HLR would respond with NOK or ERR.
Note that we can safely set "check-imei-rqd 0" in f_init(), because the
latest OsmoMSC version already suppors this VTY command.
Two tests do not always pass, sometimes the RAN connection breaks
before the test finishes (TC_lu_imsi_auth_tmsi_check_imei_err and
TC_lu_imsi_auth_tmsi_check_imei_nack). I have added them as expected
errors in the expected-results.xml.
Related: OS#2542
Change-Id: Ic34bb8dc8547cafb5a53df03884554dd4f72956d
* Some scenarios like MGW BSC-attached in SCCPlite require handling of
2 MGCP-over-UDP sockets in MGCP Emulation: 1 for regular
libosmomgcp-client from osmo-bsc and another one from the forward socket
from osmo-bsc (of MGCP-over-IPA messages communicated with MSC).
* Old port is kept for backward compatibility with other tests and
enabled by default. It's also interesting to keep it because it makes
tests without special needs (2 sockets) to use the old port/API which
produces simpler code to read and mantain.
* Users of the new port have to enable multi_conn_mode parameter and
expect to interact with port MGCP_CLIENT_MULTI instead of MGCP_CLIENT,
which will offer messages containing information about the UDP
connection being used by that message.
Change-Id: Ic0ba8c5cde068c07671512a83095d83e28b86746
The new test case is aimed to verify that OsmoMSC properly does
reject (call independent) SS/USSD messages for non-existing
transactions.
Change-Id: I231142c88b0d3308039c797aa2bccadd79dce18b
Related: OS#2931
This test case is aimed to verify HLR-/EUSE-initiated abort of an
active SS/USSD session according to the following scenario:
1. (HLR/EUSE -> MSC) GSUP_PROC_SS_REQ with random facility;
2. Network-originated connection establishment:
2.a. (MSC -> BSC -> MS) Paging Request;
2.b. ...
2.c. (MS -> BSC -> MSC) Paging Response;
3. (MSC -> MS) GSM 04.80 REGISTER with random facility;
4. (HLR/EUSE -> MSC) GSUP_PROC_SS_ERR (abort);
5. (MSC -> MS) GSM 04.80 RELEASE COMPLETE;
6. Connection release.
As can be seen, HLR/EUSE initiates the session abort right after
the GSM 04.80 REGISTER message is delivered to the MS, and just
before the MS sends anything back in response.
Change-Id: I5586a88136c936441a842f49248824680603672e
Related: OS#2931
The idea of this test case is to check that OsmoMSC does inform
HLR/EUSE that a subscriber did not respond to Paging Request in
case of network-originated SS/USSD.
Both f_expect_gsup_msg() and f_expect_dtap_msg() were extended
with optional timeout value, as we need to wait longer than
2.0 seconds (default). Let's stick to 10.0 seconds.
Change-Id: I1f53c56d569c8ac4071835685bbe3bc9e0ebd7f0
Related: OS#2931
The idea of this test case is to check that OsmoMSC properly
rejects GSUP PROC_SS messages for unknown sessions.
As it turned out, OsmoMSC doesn't send GSUP PROC_SS ERROR
as expected. The fix has been submitted.
Change-Id: Ie267ee174c5061cd3fc102a2824abe03d73f3aac
Related: OS#2931
The idea of this test case is to check that OsmoMSC properly
rejects SS/USSD requests for unknown subscribers.
Running this test case against the current OsmoMSC helped
to discover several problems:
- OsmoMSC doesn't print anything in such cases;
- IMSI in the response error message is empty;
- both session state and ID IEs are omited;
which are going to be fixed soon.
Change-Id: Id35cd3ec15d1bab15260312d7bbb41e2d10349fe
Related: OS#2931
ttcn3-bsc-test-latest currently fails on most tests because it tries to
use "osmux off" VTY param and only current osmo-msc master supports
it.
Change-Id: I53d58b2d905905ebf1df322d0389b3715a48212f
Initially it was thought safe to only enable it since the osmux test was
at the end, but actually IU tests run after it, and those don't expect
osmux to be enabled.
This way we also always match osmo-msc osmux state with whatever the
test expects (and sets through f_init()).
Change-Id: I8fb48af7d37f1a2391a39c19f5ec5064cd5869d2
Some of our files didn't have a copyright notice at all, let's add
it. Also, update the notices in other files and ensure a SPDX
identifier is present in all but the most trivial files.
Change-Id: If7fa19ce484b415bc645e39b3d0d666b44b5f0fd
Add three tests which exercise MSC behaviour when a CIPHER MODE
COMPLETE command lacks the optional chosenEncryptionAlgorithm IE.
Check for behaviour with A5/1, A5/3, and A5/1 + A5/3 configured
in the network, and expect the location update to succeed.
These tests pass on master, but they should somehow verify the
cipher the MSC ends up using. I am not quite sure how to do that.
Would inspecting the MSC's VTY be a reasonable approach? How
could his be done by code which runs on BSC_ConnectionHandler?
Change-Id: I1a2a126795c544613a7a87e238e1fc8c4e943885
Related: OS#2872
Verify that the MSC rejects a location update from a Cell/BSC that
contains a PLMN which does not match the core network's PLMN.
Related: OS#3162
Change-Id: I676894358259b9cc0f973769ce552ba58a2a58a1
Tests like TC_lu_imsi_reject, TC_lu_imsi_timeout_gsup and
TC_cmserv_imsi_unknown all expected a reject straight in response
to the LU REQ / CM SERV REQ. However, the MSC may very well decide
to perform authentication beforehand. It's an implementation
detail when a MSC/VLR performs authentication, so the tests should
be tolerant to this.
This primarily shows up in 3G/Iu/RANAP related tests, as authentication
is mandatory there.
Change-Id: Icdd3f34eca08092703ab2ba9a8e755e2d609a59b
We were using '?' for the protocolExtensions in RANAP messages,
which required that such extensions existed. In reality, we want
to use '*' which accepts paging messages whether or not there
are any protocolExtensions present. As this is the default in
all our RANAP receive template, callers don't even need to specify
it.
This should fix all Iu paging related test failures in MSC_Tests*.ttcn
Change-Id: If22e16ecb301c86b9073ffde0af9e03bc85fbcc7
Both f_mo_call_establish() and f_mt_call_establish() were testing barely half a
voice call setup. For example, f_mo_call_establish() used to be satisfied with
just two CRCX, but no actual RTP connections being made.
Add numerous MNCC and MGCP messages more closely resembling an actual call.
The main reason is to achieve a state that passes both current osmo-msc master
as well as the upcoming inter-MSC Handover refactoring.
Add log markers to f_*_call_*(): often when a test halts, it is not at all
clear why. With these log markers it is saner to figure out what has happened
and what hasn't.
Change-Id: I162985045bb5e129977a3a797b656e30220990df
This might look a bit like copy+paste programming for our testcases.
However, we actually want the Iu related tests show up as separate
'testscase' in the TTCN-3 sense, so there's no way that's more elegant
than this :/
Change-Id: I3b56e17487c9df839e67ed390a1ff89979683e8e
The new function will check the RAN type and dispath to
f_bssap_compl_l3() in case of 2G/GERAN and to f_ranap_initial_ue()
on case of 3G/UTRAN.
Change-Id: Ia27afa265d441d1a0cbb40cc2d938aff46fa25f9
This allows to start ConnHdlr on specific RAN connections, i.e.
on different emulated BSCs (and soon RNCs).
Change-Id: I3d7ec567a7b69d8c6f79d26971bf1c94e077d5f5
So far, BSSMAP_Emulation supported only a transport over BSSMAP.
However, we soon intend to merge support for RANAP in order to
simulate RANAP/Iu connections as well as BSSMAP. Let's start
by renaming some of the existing types/functions/ports/modules
without introducing any functional changes just yet.
Related: OS#2857, OS#2856
Change-Id: Iecbcb0c6c136baad9460eca40606bb4010d8882d
An MSC might decide to repeatedly retry Paging if it failed the first time, but
osmo-msc currently has no such mechanism. Instead, it so far had a bug that
retriggered a failed Paging from a start in a situation where there are SMS
pending for only one subscriber, and sending the SMS fails. osmo-msc patch
I24bf9f1c1167efe1080ae4cf47ed2ef0bd981e49 changes this behavior to accept a
Paging failure and not launch the same SMS again numerous times.
Adjust the tests to this new behavior.
Depends: I24bf9f1c1167efe1080ae4cf47ed2ef0bd981e49 (osmo-msc)
Change-Id: I7dce12942a65eaaf97f78ca69401c7f93faacb9e
If an MT SMS is triggered and not handled in the test, it is so far left behind
when the test ends. That causes Paging to retrigger for that SMS at any later
point during subsequent test runs, causing stray bogus test failures.
Actually remove the SMS from the SMS database and the queue with a new VTY
command: The vty command to clear failed SMS from the db is added in osmo-msc
I637cbd7adc075a192f49752b38779391472ff06d
Depends: I637cbd7adc075a192f49752b38779391472ff06d (osmo-msc)
Change-Id: I4ff05187131e93f5bc58dc7ea44546f770e5b4c1
Currently we do not simulate a situation where the HLR is unreachable to
the MSC. Lets add a test wehere the HLR is disconnected and an LU via
SGsAP is tried. The SGs interface should then carry out a reset
procedure.
Change-Id: I830d0b936cbe9d73d1e0b1f4792c2be3d0b08cb9
Related: OS#3859
The GSUP link between testsuit and osmo-msc is currently on by default
and can not be disabled. However, there may be situations where a
missing GSUP connection must be simulated. Lets add add a parameter to
disable GSUP if necessary.
Change-Id: I7c86aa0a906a0d7e8be765f9109a65b4b4387bc6
Related: OS#3859
When a subscriber is detached from non eps services, it gets fully
detached from 2G, which means that the VLR is supposed to remove the
subscriber. Lets check if the subscriber is in deed no longer known by
the VLR.
Change-Id: I2ec3f548dfcf5a9b99f10214a8bfd0c6978e253b
Related: OS#3614
We have a testcase that sends an explicit (UE-Initiated) imsi detach
from EPS services. Lets also cover the case for an implicit
(Network-initated) detach.
Change-Id: I63ebc32ae457dd74214d4abee4f511cde28de4a7
Related: OS#3614
We have a testcase that sends an explicit (UE-Initiated) imsi detach
from non EPS services. Lets also cover the case for an implicit
(Network-initated) detach.
Change-Id: I76049e6717680c54c18f97b7cd51944901a81ae7
Related: OS#3614
The control interface of osmo-msc is able to return a list with all
active subscribers from the VLR. Lets add a function, so that we can
check from TTCN3 if a specified subscriber is known by the VLR or not.
Change-Id: I7661ae55afe34795c3701d59795331b32d64c988
Related: OS#3614
The only reason to omit f_sgsap_bssmap_screening() in this was the still
pending SMS in the database. Since SMS are now removed,
f_sgsap_bssmap_screening() will succeed.
Change-Id: Ibea1e1fb33e0dde7e8bf51ff226d5e57c5a5d763
For the sole reason that f_vty_sms_send() was put on MTC_CT for no apparent
reason, we start the test function and send an SMS with an arbitrary two
seconds delay.
Instead move it to BSC_ConnHdlr and place SMS sending in the actual test
function flow where it belongs.
Change-Id: I5f348b3d30342b7c4871a1fc8f94648923e82eea
When aborting a call with a Clear Request, it is actually a good idea to
release an ongoing call with a CC Release message from the MSC. Allow this.
Change-Id: I8378f7602fecac8262b31b47ad9327a3782c1bcd
When a CSFB voice call is cleared by the MSC, it must include the
CSFB INDICATOR in order to trigger the BSC to perform actions
required for Fast Return to LTE.
This patch changes TC_sgsap_lu_and_mt_call() and
TC_bssap_lu_sgsap_lu_and_mt_call() to ensure the CSFB INDICATOR IE
is present as expected.
Change-Id: I6ce3a34f85aca7143cf7925cb9319bc679e8d395
At the moment the SGs interface is started and connected in all tests in
the testsuite. This may be a problem because the IUT may lack the SGs
support. In this case all tests would fail because of the missing SGs
interface.
Lets initalize and connect the SGs interface only for SGs related tests
to prevent unrelated test failures.
Change-Id: I8e012e3599ad00db2e132b6463499f8a4a2307f1
Related: OS#3614
The testcase TC_gsup_mt_multi_part_sms is known to fail osmo-msc in a
way that meaninful sms delivery is not possible anymore. This is due to
a bug in osmo-msc, but in the testsuit it makes running certain normally
working testcases impossible. Lets move at at the end of the testsuite
so that it rus late and other tests won't get blocked.
Change-Id: I581cd80895ea992a15389c6f73816769864e6d4c
Related: OS#3614
The IMSIs used with the SGs tests are partially re-used in other SGs
testcases and also in unrelated testcases. Lets give each SGs test a
unique IMSI to prevent unrelated interference with other tests.
Change-Id: I417d9c5f0fbab7483d1b31dc20a99f63ee1bbfe6
Related: OS#3614
The idea of this test case is to verify SM-RP-MR assignment for
a few concurrent MO/MT SMS being sent over GSUP.
Basically, the algorythm is the following:
1.0 establish a RAN connection,
1.1 send CM Service Request for MO SMMA indication,
1.2 submit MO SMMA indication on DTAP,
1.3 expect MO-ForwardSM-Req on GSUP,
2.0 send MT SMS using MT-ForwardSM-Req on GSUP,
2.1 expect CP-DATA/RP-DATA for MT SMS on DTAP,
3.0 compare both SM-RP-MR values (for MT, assigned by the MSC),
3.1 send MO-ForwardSM-Res for MO SMMA on GSUP,
3.1.1 expect CP-DATA/RP-ACK for MO SMMA on DTAP,
3.2 send CP-DATA/RP-ACK for MT SMS on DTAP,
3.2.1 expect MT-ForwardSM-Res for MT SMS on GSUP.
Change-Id: I17cbbaa64d9bce770f985588e93cd3eecd732120
Oliver Smith
Vadim Yanitskiy
Pau Espin
Harald Welte
Philipp Maier