For 12+ days, suspend/resume related SGSN + PCU TTCN3 tets have been failing.
It was the introduction of the BSSGP_CT:GLOBAL test port in
I40d973d80709f5d56f59247e8647b52754f09bc8 +
I805372f3024a0ec2491a24422e02c0bc6dc669d2 which caused the related PDUs
now to no longer show up where they used to.
Change-Id: I1977302fef4868dc1c330bc6f48f6a6608949393
Closes: OS#4902
There are some messages/procedures on a PTP BVC which are not related
to one specific TLLI, but affect the whole PTP BVC. First and foremost
that is the FLOW-CONTROL-BVC. Let's check if the user is interested in
handling those internally (by connecting to the GLOBAL port). If not,
fall back to acknowledging all incoing FC-BVC and ignoring all ACKs.
Related: OS#4891
Change-Id: Ib80a6a522dbcb33fd0e7bd31a73ef28fdc636f57
This port is used for sending/receiving RIM related BSSGP messages. It
exists once per BSSGP_CT Component (i.e. once per NSE), as RIM is global
for the entire NSE.
Change-Id: I04511df5dffbfe19faabf22014acc72b7673b7d6
Particularly in case both sides initiate a BLOCK or UNBLOCK procedure
at almost the same time, it can happen thet we're already in BLOCKED
state and receive a late BLOCK-ACK or in UNBLOCKED state and receive a
late UNBLOCK-ACK.
Let's just silently discard them instaed of generating NS-STATUS which
may confuse the peer.
Change-Id: I2e5b934e1cf6c6cf982d5ab1dbb32e8920b91071
These allow passing N vty configurations on the bts / msc node without
requiring subsequent 'exit'.
As an example, use f_vty_cfg_msc() in BSC_Tests.ttcn AMR config.
Change-Id: I9f3e485f692acb3d2a7620e9b454b372651be78e
f_vty_config2() makes it convenient to enter a specific vty node without
needing to send 'exit'/'end' explicitly. However, to pass multiple
commands on the same node, the VTY would enter and exit the node for
each call of f_vty_config2(). The new f_vty_config3() also allows
multiple commands to be run on that same node without intermediate
exiting.
Change-Id: If969ac645aa82e5a36245d974de2a251633de111
When the SGSN is sending an OVERLOAD message, we expect that to
propagate down to every BSS on the other side.
Change-Id: Ic61fabd9c633bcb3f256fe7aa5834e66cc66a4fb
This tests the LLC-DISCARDED message, which relates to a BVCI but
is itself sent on BVCI=0. We expect it transparently passes from BSS
to SGSN.
Change-Id: I98d02d6fa68bddf15b732d06dab00e91e72995d1
the existing ordering of altsteps unfortunately caused some
receive clauses never to be hit, as they are only in the default
altstep, while more generic receive clauses are already in the
state-specific altsteps.
Let's introduce an as_allstate_pre() and an as_allstate_post() to
solve this ordering problem.
Change-Id: Icc4da95833557931d6685826fb30bdc60bf460c1
We recently introduced a MGMT port in the per-BVC component for the
PTP BVC. Let's add this also to the signaling BVC.
Change-Id: I24df4cb290c9f9dc1a7398994af101711f12d42e
This notifies the user via the MGMT port about the fact that an inbound
BVC-RESET procedure just happened.
Change-Id: I54d0d5e0e06a330a90dfb1da06062d65022efe81
We need to change to BLOCKED local state in order to activate
the altstep which handles the inbound BVC-RESET-ACK.
Change-Id: I32ede586f0977b7d96af9fe3ea5fae485184ea98
We cannot handle this in as_ptp_allstate(), as the respective clauses
are never hit: In as_ptp_unblocked() we broadcast all BSSGP messages
without a TLLI, "hiding" the BVC-RESET handling.
Change-Id: Ie3e7a997554e6af42ae7e7294829b6f8d2447d60
Add a log label argument to f_vty_wait_for_prompt(), and feed the sent
command from f_vty_transceive*(), so that the failure verdict already
lists the vty command that caused the failure.
A common error is to issue insufficient 'exit' commands, so that I often
think the newly added VTY command failed, even though it is a subsequent
command causing the failure. I want to shorten the "time-to-aha" there.
Change-Id: Icfd739db150d86e9256a224f12dc979dcd77879f
The per-NSE BSSGP_CT gets a new GLOBAL port which is used for procedures
that are not specific to one BVC, such as the SUSPEND/RESUME related
PDUs, which all are on the signalling BVC without any BVCI in the BSSGP.
Change-Id: I40d973d80709f5d56f59247e8647b52754f09bc8
In some cases GsmArfcn itself is not enough. It case of L1CTL
and GSMTAP, it needs to be equipped with a band discriminator:
- DCS / PCS (as the numbers may overlap),
- Downlink / Uplink (not yet there).
Let's rename this record and move it to GSM_Types. Also, add
send / receive tamplates, so we can add new fields later.
Change-Id: I7a63f03bbd15a06caafb786122dc12991d115771
The primitive normally only contains NSE + BVCI, but in a tester
we actually want to verify which NS-VC a given message has arrived on,
and hence it makes sense to add the NSVCI, too.
Change-Id: I9402bf0be47e5b93c9cfb081eb8f9fa6734c9227
This took me quite some time: Tried to use NS_PROVIDER_FR, but the
code was compiled without support for it. It just failed silently
without printing any error or ever sending any message on the FR link.
Change-Id: I96475127a2079830b3456a8e288adf4c6c908887
This port can (optionally) be connected to, and it will receive
state change notifications as well as permit the user to block/unblock
and reset the specific PTP BVC.
Change-Id: I1f0289c8805168e3daace4a7d76764b45cead3d0
The existing BSSGP Code assumed that the TLLIs were always known "a
priori" by the test case. With the newly-introduced create_cb,
the user can provide a function to handle any incoming messages for an
unknown TLLL. The default handler behaves like before: fail +
terminate.
Change-Id: Ice0e145f5a6518ff79547dd851042b7965f38e00
The template restrictions are quite useful, becaue they give hints
to the TTCN-3 compiler, so it can spot more bugs. For example,
the lack of thereof would not prevent one from passing 'omit' to
a template, that assigns a value to a non-optional field, so that
might lead to a DTE at run-time in some cases.
Since adding 'template (restriction) ' to each template parameter
obviously makes templates look more cumbersome, let's move the
part with template name and arguments onto a separate line, just
like it's sometimes done for function definitions in C.
Change-Id: I7e6846381e0b3fb611059fcfbafb19bd6c15cfd8
Those functions don't depend on any L3 specific data structurs, and
it is not a good idea to burden every user with having to impot all
of a 2G/3G Layer3 just to generate some hexstring identifiers.
Change-Id: I6fc41ed94e97e0ec44dc4ea56d110bdd9ac77a72
Those functions don't depend on any L3 specific data structurs, and
it is not a good idea to burden every user with having to impot all
of a 2G/3G Layer3 just to generate some hexstring identifiers.
Change-Id: I7880633a46afc607f16f8aa6ea1a277f7958c95b
The Load Sharing Function distributes traffic among all unblocked NS-VC
within a NS-VCG. The sharing is done based on a LSP (Link Selector
Parameter) which is passed with the NS-UNITDATA.req primitive from BSSGP
to NS. Details are implementation specific, but NS must ensure that all
traffic of one LSP is always sent through the same NS-VC, as long as
that NS-VC is alive/unblocked.
We use the LSP as follows:
* Signaling BVC always only uses lsp 0
* PTP BVC messages unrelated to user straffic use a per-BVC static LSP,
which is the BVCI
* User traffic can set whatever LSP it wants
* NS keeps an array of NSVCs currently unblocked and uses the LSP modulo
the array size as an index into it
Change-Id: I8b960ec4d729f50cadca353bb52685311cd45eed
Related: SYS#5084
In case of a NS-VCG with multiple NS-VC, we must BVC-RESET only when the
first NS-VC becomes unblocked, i.e. as soon as we have any connection
to the peer at all. Whether we have further additional links doesn't
matter, at least not in the sense that all state should be reset.
Change-Id: I69b2e9bd919fc981f189b6671b4234c3642e2449
Harald Welte
Neels Hofmeyr
Daniel Willmann
Vadim Yanitskiy
Pau Espin