In each subdir that is a target for symlinks, automatically ignore the results
of gen_links():
- At the top of gen_links.sh.inc, clear the .gitignore.
- In the loop, add each link name to the local .gitignore.
- In selected gen_links.sh, there is also a "manual" link creationg. So that
this also ends up in the local .gitignore, have the link creation as separate
gen_link() macro which at the same time adds to ./.gitignore.
- in the root .gitignore, ignore all the subdirs' generated */.gitignore files.
Change-Id: I73c11fe8362358bf7e1bdf0e1be53399b5d3351b
First of all, use one common place to define the gen_links() macro, in
gen_links.sh.inc.
In this new file, add a 'shift' to exclude the $DIR arg from also appearing in
$FILES.
This prevents the following wrong symlinks in the source dirs:
M3UA_CNL113537/src/src
MTP3asp_CNL113337/src/src
SCCP_CNL113341/src/src
Change-Id: Ia8493e77df1ba8723f2c5d2a49816247b0fb55f7
The cell identifier used by the paging tests is 001-01, i.e. uses a
2-digit MNC. With the introduction of 3-digit MNC support in osmo-bsc,
the paging tests became incompatible with a osmo-bsc config with:
network country code 1
mobile network code 1
Explicitly declare a Cell_Identity with 2-digit MNC (includes an 'f').
Also, fix f_enc_mcc_mnc to properly encode 2-digit MNC values.
Related: OS#2847
Change-Id: Ide5228b403e43de8649b6eda18749ea2a9f592a9
bsc: add TC_bssmap_clear_does_not_cause_bssmap_reset(), but the same triggered
by an MS Rel Ind and a BSSMAP Clear Request sent to the MSC first.
This test will only succeed once TC_chan_rel_rll_rel_ind() succeeds, i.e. with
below osmo-bsc fix.
Related: OS#3041
Depends: I0f8c9c4e6b6850b15c70250fd3f88bdf75f9accf (osmo-bsc)
Change-Id: Ie4aa2f01c83b40303fa40ed64dbfce372b7cd96c
This test sends a REL IND from the MS and immediately expects an lchan release.
Instead, osmo-bsc patch I0f8c9c4e6b6850b15c70250fd3f88bdf75f9accf decides to
signal full BSSMAP Clear Request to the MSC first, so expect that first.
Note that this test currently fails, and said osmo-bsc.git patch will make this
test pass.
Change-Id: I737be141b69a250eb6eb38007f8042981c1a31cf
Same as TC_bssmap_rlsd_does_not_cause_bssmap_reset(), but with a proper BSSMAP
Clear from the MSC first.
Related: OS#3041
Change-Id: If6ca85d7b80a727cbfdabbf07529ced22602734e
A test with BSSMAP Clear involved would also be a nice addition, but this so
far tests a direct RLSD from the MSC.
(One way to invoke a typical release situation would be a scenario like in
TC_chan_rel_rll_rel_ind(), but that test currently fails; another would be to
directly invoke a BSSMAP Clear from the MSC first.)
Related: OS#3041
Change-Id: I168cf240383485a5ffbbde377b4f89c5d1f5ab93
If the T_guard runs out, unless we self.stop, we might run into this
potentially confusing follow-up error:
00:23:04.206712 mtc BSC_Tests.ttcn:322 Dynamic test case error: Copying an unbound value of type @RSL_Types.RSL_Message.
00:23:04.206778 mtc BSC_Tests.ttcn:322 setverdict(error): fail -> error
Change-Id: I1d373159483bdd9f74e8944e430913e73c289e03
The altstep as_handover does not exit as each of its branches is
equipped with a repeat statement on the end. This trapps us in
an endless loop.
- remove the repeat statement at the last logical step which is
at the RSL_REL_REQ.
Change-Id: I8cb57a9fef606f459542708206f5ea4de1def7a1
Currently we use isbound() in f_start_handler() to check if the BTS
which we want to connect is indeed populated. However. isbound()
seems never become true in this particular situation.
- Use isvalue() instead of isbound()
Change-Id: I25ddd55b7626087570311999b85ec7632b162c06
When the test component ends and the underlaying
components are shut down. Messages from the system
under test may still be picked up and forwared. When
a message is handed from one component to one that
is already shut down, the testcase is flagged as
errornous setverdict(error).
An idea to fix thisis to stop all test ports using
all port.stop. However, this does not solve the
problem entirely. We still observing errors.
- add f_shutdown_helper() and call it from the
end of each testcase
- perform an all port.stop; in f_shutdown_helper()
to freeze all communications between the ports
of the different components.
Change-Id: Id3bc840c0428d08dfbeedacc408b3dd1cd0fa7ec
The testcase TC_paging_imsi_a_reset sends a paging request that
causes pagings on all cells. Then it performs a BSSMAP reset and
checks if the paging has stopped. In order to be sure that paging
requests from before the reset procedure are not mistakenly
detected as after-reset-pagings the RSL queue is cleared. However
this is only done for IPA_RSL[0], which means IPA_RSL[1] and
IPA_RSL[2] still contain old paging requests, which lets the test
fail.
- Clear IPA_RSL[1] and IPA_RSL[2] as well.
Change-Id: If0cdc0325fd0e1dcf3e4ce52e4de27adb4d9cf48
RSL_Emulation has recently gained a port for the common channel
management messages, but BSC_Tests was not updated with this port,
resulting in RSL_Emulation enqueuing messages to the port which then
creates dynamic test case failures.
Let's simply connect to the port, even though we currently are not
interested in any of the messages received there (mainly
RSL_MT_BCCH_INFO during startup).
Change-Id: Id8a3c4409599783ca4cd0b49f2570bcb3bb34952
The testcase TC_paging_imsi_nochan assumes that a paging for no
channel, with no specifc cell associated and without TMSI is
illegal. This is not correct. All these fields have legal values
and the TMSI field is optional.
- Replace the testcase implementation, use f_pageing_helper() to
create the paging.
Change-Id: I6a56fb0ee06ae7e72a7ac2b6b058ad54f94127ab
Let's use the preprocessor to avoid IPA_Emulation pulling *all*
dependencies into each and any of our projects. The code readability
suffers a bit from the many #ifdefs, but compilation speed increases
if we don't have to pull in all those (recursive) dependencies.
After all, a BTS test case will never need SCCP, GSUP or MGCP.
Change-Id: Ic0231adbd2171214de133d26b3fbf36130ee8aa0
This adds two new tests: One for RSL, and a second one which performs
the same test on the OML port. Both tests open an IPA connection and
send a unit ID which is unknown to the BSC. The tests expect the BSC
to close the connection immediately.
We need to add handling for a socket error in IPA_Emulation because
otherwise these tests do not pass reliably as some closed connections
are not properly detected.
Change-Id: I6a947d7411a016e4d7650031396cae3575756453
The provided BSC_Tests.cfg, which contains as a commented line for
local debugging, does not contain all tests from the control section.
- Update BSC_Tests.cfg so that it contains all tests from the
control section
Change-Id: I67f5906c3c67ae5793d88eee81b58ceac0bed658
The provided osmo-bsc.cfg does not contain any codec list, this
causes failure of the assignment related tests.
- add missing codec list
Change-Id: Id2509bcac4c54c910efd2db749eaa2085daa358d
The testcase TC_paging_counter is missing in the control section.
This means that if it is not started explicitly, it is not executed.
- Add TC_paging_counter to control section
Change-Id: Ie37b8cb554ea1db64a8d7927eb300d368ce67137
Let's make sure we share common configuration between the test
suites and split the config file into a "default" part which is
used (but not copied) in the Docker images, and a "local" part
which is basically those overrides that the user (or docker image)
wants to do from the default.
Change-Id: I3db452e24e5238aa05254d903739c64d202e61db
This allows each ConnHandler to issue telnet commands to the VTY
As a side-effect, it puts some more stress on the VTY interface,
as each [parallel] DchanHdlr now has its own telnet connection.
Change-Id: Ibd726af53219d829286da80b44ea4d9fb2ffdf3d
When f_expect_chan_rel() is called after receiving the BSSMAP
RESET and DISC.ind f_expect_chan_rel() is called. The flush
parameter is not set, which means the default flush = true is
valid. This leads into an early flush of the RSL Queue and
tosses the RSL RELEASE REQUEST we expect, so the test can not
pass, even when the BSC sends the RLEASE REQUEST.
Looking further up in the code. IPA_RSL[0].clear is called,
so the Queue is flushed to get rid of unwanted messages from
the IMMEDIATE ASSIGN. There is no need to flush the queue
a second time anyway.
- Do not flush the RSL queue, set flush=false when calling
f_expect_chan_rel()
Change-Id: I2962f741e0b13dec08ac6c918d326828beb65a6a
A problem with the parameter ordering inside the mgcp-client
(osmo-mgw) prevented TTCN3 from accepting the SDP data that
was generated by the IUT. The problem is now fixed and the
hack can be removed.
- remove hack
Change-Id: Ic37f78c2676e7c98144f10e9f3b55bc9651a4f7c
Related: OS#2818
The representation of the chiphering algorithm is different bssmap
and RSL. BSSMAP uses a bitmask and RSL a numeric value. For A50 and
A51 the values match up by coincidence, from A5/2 onwards they differ.
- Add a function to convert the BSSMAP representation to the RSL
representation and use the converted value to set up the temlate
for the expected RSL message
Change-Id: I274c1ff0b5636c48411f994f918e783b468cb3be
The altstep guard statements are to restrictive so they do not
match on an expected assignment failure anymore.
- Add a new altstep for expected assignment failures.
Change-Id: I78b839f0bcb7e2da61bff0add3abc452bfea40a2
When we page an unknown/unsupported CellIdentifier format, OsmoBSC
decides to page on all BTSs to be safe. This way we have a chance of
making communication happen, rather than breaking it.
Change-Id: Ibd0ba986d9e18758b519e852c36f4dbbb6b367ea
We now test all of the cell identification types specified in BSSMAP,
and also lists with a length != 1 entry.
Change-Id: I261f948d6054d0c90078c1dd0b2785a967b0a49b
We have to wait for sime time until some RSL paging command would have
arrived, rather than continuing too quickly.
Change-Id: I63827aa3c42f77648ecad401b3cc4bae927b3b94
MGCP permits for the CallAgent to send a wildcarded endpoint name,
at which point the MGW itself must allocate an endpoint name and
return it as SpecificEndpointId parameter in the CRCX response.
Change-Id: I704bbe4e11b27e83a6ae6a71aa6a715dc8301f34
We shouldn't "pass" f_establish_fully() in the assignment case
as long as the old RF channel hasn't been released via RSL.
Change-Id: If7c7c8c4826feba47f8a0395c291157a0e48cd9d
This adds code for the rather intricated and nested transactions
happening on RSL, BSSAP, MGCP and RSL-IPA. We use explicit
invocation of altsteps to simplify the main function f_establish_fully.
Change-Id: I5f830b010ea1b466ae74fa810df86638a74a3b8b
During assignment or hand-over, a given TTCN-3 component may be
interested in registering more than one channel number. Add an explicit
procedure port with associated registration procedure, similar to what
we already do in GSUP, MNCC and others.
Change-Id: Iba37bf9541c779b79e179f995cdfa677633fadeb
The point of this test is to verify that *no* paging messages are sent
if "No cell" is given as cell identifier list by the MSC. We can thus
not use the existing pageing_helper function, but have to handle this
a bit differently.
This makes TC_paging_imsi_nochan runs pass.
Change-Id: Iec1086bd42f42de1986bb00b91af718977f73b30
There's no point in listing non-existing module parameters. Instead,
list those that the BSC testsuite actually has
Change-Id: I3cb756750cafba4ca481a0a98d19e27cb58395df
This test case was incomplete in that it didn't account for a RLL REL
REQ/RESP before RF_CHAN_REL.
Together with OsmoBSC Change-Id
I64a46b5bcd4272e3fa2ff4ee824c2f3fdff6854b, this test now passes.
Change-Id: Ia5af254d4fc572c1d324f70b5ec99d87bdaf9eb9
This test case was incomplete in that it
* applied the wrong timeout T3101 instead of T3210
* didn't account for a RLL REL REQ/RESP before RF_CHAN_REL
Let's fix it. Together with OsmoBSC Change-Id
Ie11d7d06353ba1b1e2fab6763dd7b032ce8a5d2c this check now actually
passes for the first time.
Change-Id: I9ed41d246cf153735fd4e71cc6cc174ede32a76b