With Icaa2775cc20a99227dabe38a775ff808b374cf98, osmo-bsc no longer allows
configuring CBSP as both server and client at the same time, and the 'cbc' VTY
section has a different structure.
Adjust the 'cbc' section in osmo-bsc.cfg.
For each CBSP test init, switch osmo-bsc's CBSP link to server or client mode
by new vty command 'cbc' / 'mode (server|client|disabled)'.
Related: Icaa2775cc20a99227dabe38a775ff808b374cf98 (osmo-bsc)
Related: I9e9760121265b3661f1c179610e975cf7a0873f1 (docker-playground)
Related: OS#4702
Change-Id: I7eea0dd39de50ed80af79e0f10c836b8685d8644
The bsc/BSC_Tests_CBSP.ttcn rely on a configuration where the first three BTS
carry out SMSCB messaging, and the fourth BTS does not. That requires a CBCH
channel config on bts 0, 1, 2.
Side effects:
- adjust the number of available SDCCH (for TC_chan_exhaustion).
- there now is a CBCH channel description in SI4, add this to
SystemInformationConfig_default.
Related: Idbcc703ace7012fb395f0eef3e445df28b368d74 (docker-playground)
Change-Id: Iac46ee2cc5bc0978d5f5baa550baf493a7c56b1b
It appears some changes were made only to the files in
docker-playground.git, but not here. This means that running
tests locally produced unexpected results.
We must always ensure that the tests run both without and with
docker, which means making sure the configs are all maintained!
Change-Id: I3a3f4c572b8a390882fb8f12807018ca19e4827c
This was removed when libfilter was removed from osmo-bsc.
For some strange reason apparently the config files were not used/tested
while testing the removal of libfilter.
Also, irrespective of breaking TTCN3 test execution, we must introduce
a dummy 'access-list' VTY command to osmo-bsc to ensure we don't break
virtually every config file out there.
Change-Id: I5d703b9f2f1066654daa43519999585cf9ec7e78
osmo-bsc does not use an rtp-base for years, ever since we're using an MGW.
Related: Id14fa3066ca5d472a817593074a6222f159168a8
Change-Id: Ia4866fc603877b2ab8ce16683e9f6145764117c7
Since osmo-bsc commit "neighbor config: allow re-using ARFCN+BSIC pairs"
(I29bca59ab232eddc74e0d4698efb9c9992443983), osmo-bsc considers only those
cells as neighbors that are explicitly listed, or all local cells if none are
listed. This lead to breaking TC_ho_int, because the osmo-bsc.cfg has only one
remote-cell neighbor for bts 0, and hence a handover to local cell bts 1 is now
regarded as invalid.
The remote-cell neighbor is needed for inter-BSC handover tests; also consider
that the TC_ho_neighbor_config_* tests each place individual neighbor
configuration by live VTY interaction.
Hence make all of these tests more robust: remove the neighbor config from the
osmo-bsc.cfg file, and instead include VTY interaction for each test case that
sets the particularly needed neighbor configuration at runtime.
An analogous osmo-bsc.cfg change in docker-playground is in change
If44dd6b578cdc55076c8180707d1c2d69fe5f2a8.
(It is not actually harmful to leave the neighbor config in osmo-bsc.cfg, but
remove that since it is also not needed anymore.)
Change-Id: If44dd6b578cdc55076c8180707d1c2d69fe5f2a8
Add tests to play through various neighbor configurations.
Tests will pass as soon as osmo-bsc I29bca59ab232eddc74e0d4698efb9c9992443983
is merged.
Add RSL2 to allow triggering handover to BTS 2.
Adjust osmo-bsc.cfg to match the new tests. Also applied in docker-playground
I1c57a04747f5ec004ccf4657954dcb0b003c24fc.
- Actually enable handover.
- Add bts 3
Depends: osmo-bsc I8623ab581639e9f8af6a9ff1eca990518d1b1211 ('no neighbors')
Related: OS#4056
Change-Id: Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
The osmo-bsc.cfg should work on localhost. Having arbitrary IP address
in it seems confusing and might lead to hard-to-debug errors.
Change-Id: Ideb8a78348af435f9992c42bce0bb197d1e73e04
Add f_gen_handover_req() like f_gen_ass_req(), to match AoIP or SCCPlite
requirements.
For incoming HO, MSC_ConnHdlr needs to know the SCCP addresses to expect the
incoming SCCP Connection from MSC to BSC. Add 'handover' section to
TestHdlrParams, and pass in the addresses from test_CT via that.
In osmo-bsc.cfg, add a remote neighbor config, so that the VTY command
'handover any to arfcn 123 bsic any' can trigger an outgoing inter-BSC HO.
Add various BSSMAP handover templates to BSSMAP_Templates.ttcn.
Add RR Ho Command template to L3_Templates.ttcn.
Move ts_BSSAP_Conn_Req() from msc/BSC_ConnectionHandler.ttcn to
library/BSSMAP_Emulation.ttcn, so we can also model an SCCP Connection Request
in BSC_Tests.ttcn (this time from MSC to BSC).
Add the two new tests to bsc/expected-results.xml.
Related: OS#2283
Change-Id: Id22852d4be7f127d827e7a8beeec55db27c07f03
The osmo-bsc.cfg file in docker-playground/ttcn3-bsc-test contains
codec, encryption, and ipaccess settings which were missing from
the corresponding configuration file in this repository. This caused
spurious test failures when running BSC_Tests outside of Jenkins.
Change-Id: If392dcd42fb741c7ab8ae204bbefde89f05f0afe
All three BTS are configured for ARFCN 871 and BSIC 63, which causes trouble
for handover tests. Set BSICs to 10, 11 and 12 (not 0,1,2 to mark the
distinction from the cell_identity).
It wasn't a problem so far since we cheated by passing the BTS target number
from VTY. But as soon as we will start identifying handover target cells by
ARFCN+BSIC exclusively, TC_ho_int would fall on its face without this patch.
See also: docker-playground I29a117aa54aa06ca49646f25a08af8521832fd8d
Change-Id: I2ea8889ea40953f5a23eab40db52585556a410bc
At the moment we use onle TCH/F and PDCH in our osmo-bsc config,
but the tests TC_assignment_codec_amr_h and TC_assignment_codec_h
requre a half rate channel in order to work. Configuring one TCH/F
to TCH/H seems not to hurt any tests except TC_chan_exhaustion
- also regard half rate channels in TC_chan_exhaustion
- change included sample osmo-bsc.cfg
Change-Id: Idd5a9602f1b49b5aa0fc510faa151fe16c0b404d
Related: OS#3100
The settings concerning the IPA ping are a leftover from the
time where osmo-bsc used an IPA multiplex to support the the
SCCP lite A interface dialect. Since the related code is now
removed and osmo-bsc has been migrated to libosmo-sccp and
real AoIP interface, the configuration is no longer needed.
Change-Id: If67cdba2a043c5dbf23f998659c5000db924a7df
The provided osmo-bsc.cfg does not contain any codec list, this
causes failure of the assignment related tests.
- add missing codec list
Change-Id: Id2509bcac4c54c910efd2db749eaa2085daa358d
The paging tests expect BTS 0 and 1 in LAC 1, and BTS 2 in LAC 2.
BUt the osmo-bsc configuration file had BTS 1 in LAC 2, and BTS 2 in LAC 1.
Change-Id: I1d6b02fe06116dee59977422bc93bcafcd3aba76
This allows us to verify if the BSC pages *only* where it is supposed
to page based on the cell identity list in the 08.08 PAGING.
Change-Id: I53ffe44279a7b83e045b3fdb25da64529955d457