osmo-bts does currently not use the signaled lchan BS power level, nor
does it update the BS power IE returned in the measurement results.
Change-Id: If91fb57b4070c60bb277d0b55d69ee3dde47ee48
The testcase failed becaues of an unexpected RSL Error Indication from
the LAPDm system which was in the RSL emulation queue when tearing down
the test environment.
By calling f_rsl_chan_deact() the queue gets flushed until the RSL
deactivate channel is received. It's also more clean to release the
channel.
Fixes: OS#4051
Change-Id: I55827626803ca81b68f905fd0df3126367951f39
A large number of our tests is currently failing with
BTS_Tests.ttcn:341 Dynamic test case error: IPL4 Test Port not mapped
which was introduced by Change-Id Ie7d311bf8f03bf9b1d29b5bb28ffad793f215fd1
Change-Id: Ia1ef4ac7dcfec137a8613bc49a7f312d81a86153
Test that the BTS will take no action when it receives an SABM frame
with the C bit set wrong (R); Inspired by TS 51.010-1 25.2.5.2
Implemented as TC_sabm_incorrect_c().
Related: OS#4032
Change-Id: I4fbe7e708c9b1a2c04e5d24a205b5b5af20ff8c7
Before this patch, sending special TRXC commands to FakeTRX, such as
FAKE_TOA and FAKE_RSSI, from ConnHdlr resulted in a receive timeout
waiting for the response.
As it turned out, both the test_CT and the ConnHdlr have a TRXC port,
as depending on the test one would want to globally control it
from test_CT or from within a ConnHdlr.
However, only one of the two should be active (connected) at any given
point in time. Otherwise we'll have two UDP sockets on the same bind
port, and it's more or less random on which of them it ends up.
Let's add an optional parameter 'trxc_comp', which would indicate
whether we need to control TRXC from ConnHdlr or not.
Let's get rid of both f_trxc_connect() and f_main_trxc_connect(),
which basically do the same, but run on different components.
Change-Id: Ie7d311bf8f03bf9b1d29b5bb28ffad793f215fd1
Closes: OS#4039
This adds the following test cases to BTS_Tests_LAPDm.ttcn:
* TC_sabm_retransmit_bts()
* TC_sabm_invalid_resp()
* TC_sabm_dm()
* TC_establish_ign_first_sabm()
* TC_iframe_seq_and_ack()
* TC_iframe_timer_recovery()
Change-Id: I4e1136c0c0f10d5bc8d01e826ae5d92f17a0b2aa
The f_init() function itself can very well derive the identity using
the built-in testcasename() function. There's no need asking users
to do that - many of them don't do it in the first place :/
Change-Id: I17a61a84fba4df31b8baab1f631c8aa55d894dbd
The idea of this test case (as can bee seen from its name) is to
verify handover RACH detection. What we basically do is:
1. Activate a logical channel on the BTS side (HO_SYNC for now);
2. Switch the MS (e.g. trxcon) to that channel without waiting
for Immediate Assignment and sending Access Burst;
3. Send an Access Burst on that channel using RA = HO_REF;
4. Wait for RSL HANDOver DETected from the BTS;
5. Release a dedicated connection.
There is no way to verify if the Handover Reference received
from the MS matches the one that was sent to the BTS. We can
introduce a separate test case that would just send an Access
Burst with RA != HO_REF.
Change-Id: If2e8d9c9947823df62f4bcc9a7fcd20734ff7858
Depends on: (trxcon) Ia967820a536c99966ba2c60b63d2ea9edb093f46
In BTS_Tests.ttcn we used to compose L1ctlDataReq manually. This
can be done by ts_L1CTL_DATA_REQ_SACCH() template itself, so
let's abstract BTS_Tests.ttcn from doing that.
Change-Id: I1ae948bd0314cdf15c21ce4b6346d5e32f1fcf95
When no PCU is connected to the BTS, the BTS should mask the GPRS
indicator from the SI3 rest octets to indicate "no GPRS support"
in the cell. This will cause phones not even trying to send us
RACH requests for GPRS ATTACH, RAU, etc.
Change-Id: I37efb712ee0c513aea230beeb35e7dabce698a34
Related: OS#4023
Related: OS#3075
This test will currently fail due to a MODE MODIFY NACK, even though the
channel mode is not modified.
Related: OS##3750
Change-Id: I4cbea499bb6a331d314e6573548a4540945208b5
When executing the test on our build slaves, we ran into the following:
> Number of TDMA Frames (1100) not matching (1073 .. 1093)
> Number of TDMA Frames (1096) not matching (1073 .. 1093)
So it seems the tolerance was a bit too tight. If the timer runs
for a bit more than the requested amount of seconds (e.g. due to
high system load), the number of TDMA frames is likely a bit higher
and hence we need to permit a larger tolerance.
Change-Id: Ib00bb7e7f223fb0329d00e3835127b8c31299e27
This adds TC_pcu_socket_connect_multi, which verifies that a second
connection to the PCU Intrerface socket is denied while the first
connection is still established.
Change-Id: Ib484a0a39e719cb2ce00a9464fc1207357ec9e93
Related: OS#4023
Bring our TTCN-3 view of how RSL channel numbers are defined in sync
with that of our other implementations (BTS, libosmocore, trxcon, ...)
Change-Id: I48908058ac2501a3b5ae7c74e4e8527cbaee1b01
Related: OS#4027
In OsmocomBB/trxcon Change-Id Ia94ebf22a2ec439dfe1f31d703b832ae57b48ef2
we introduced a new mode CCCH_MODE_COMBINED_CBCH to indicate that the
channel combination is a CCCH+SDCCH/4 with one SDCCH stolen for CBCH.
Let's make sure we actually use that mode in our CBCH related tests
Change-Id: I27ee2c81bec7175c1ea09d4f3f6037f2866fe242
Some of our files didn't have a copyright notice at all, let's add
it. Also, update the notices in other files and ensure a SPDX
identifier is present in all but the most trivial files.
Change-Id: If7fa19ce484b415bc645e39b3d0d666b44b5f0fd
This test opens a SDCCH and sends a RR SUSPEND message from the
simulated MS. It then expects the BTS to pick that up and forward
it to the PCU socket rather than via RSL to the BSC.
Change-Id: I4da6e9d7c5dfbd0e017d2a63c6474da700c38e52
Related: OS#2249
Related: OS#4023
The four existing test in BTS_Tests.ttcn so far didn't have any chance
to verify if the invalid messages actually ended up on the air interface
or not. By using virtphy instead of trxcon, we can finally add that missing part.
Change-Id: Ie05d6b1530bd4d4cf4eaa574b068870682439ee4
Related: OS#4023
As trxcon+fake_trx don't have GPRS (TBF) support yet, we cannot do
any PCU related tests involving the Um interface yet. Instead, let's
use virtphy to fill that gap. Using virtphy, we can actually
receive/transmit GPRS blocks on the simulated Um interface.
TC_pcu_data_req_{pdtch,ptcch} are moved to a new test suite
"BTS_Tests_virtphy.ttcn" which should symbolize that the related tests
are to be executed with osmo-bts-virtual + virtphy instead of
osmo-bts-trx + fake_trx + trxcon.
You also have to set the following module parameter to make this work:
BTS_Tests.mp_bts_trxc_port := -1
Related: OS#4023
Change-Id: I677f660b1076148b3317b08b06eb3d6551d9b577
This new test verifies that the expected amount of PCUIF_RTS_REQ are
observed on the PCU Interface for both PTCCH and PDTCH.
Change-Id: Ic27cdd4f4adf11f871b84bd72692a03280274fe2
Related: OS#4023
As we don't yet speak OML directly from the TTCN3 test suite,
this requires a currently "RFC/WIP" state patch turning OML
Failure Event Reports into CTRL TRAP on the BSC, see
https://gerrit.osmocom.org/#/c/osmo-bsc/+/14177
Change-Id: I6c7641b37b6ee2177d43127140cc0b625409379c
Depends: osmo-bsc I4f8a9737c6ef1b951ea8e742cdbd3689371a99d5
Related: OS#4023
Add three BTS_Tests.ttcn test cases for verifying the BTS behavior
regarding CCCH LOAD IND (RACH).
Related: OS#3750
Change-Id: I6c9dee1d7d3eaa218fdce7ebb8e334858aedb736
Eric Wild
Pau Espin
Alexander Couzens
Harald Welte