Both f_mo_call_establish() and f_mt_call_establish() were testing barely half a
voice call setup. For example, f_mo_call_establish() used to be satisfied with
just two CRCX, but no actual RTP connections being made.
Add numerous MNCC and MGCP messages more closely resembling an actual call.
The main reason is to achieve a state that passes both current osmo-msc master
as well as the upcoming inter-MSC Handover refactoring.
Add log markers to f_*_call_*(): often when a test halts, it is not at all
clear why. With these log markers it is saner to figure out what has happened
and what hasn't.
Change-Id: I162985045bb5e129977a3a797b656e30220990df
Randomly, this test issues the Clear Command so fast that the MGW has not yet
been set up, and hence the test cannot possibly see DLCX for endpoint conns
that haven't been set up at all. So, simply wait a bit before clearing.
Change-Id: Idd0b3810916efd02a499e0ac060a6a275265b8c3
This function is required not only for the MSC_Tests, but also for
the upcoming Iu related SGSN tests
Change-Id: Ic23669671ce79151046f2330726bb68542faeb0e
This might look a bit like copy+paste programming for our testcases.
However, we actually want the Iu related tests show up as separate
'testscase' in the TTCN-3 sense, so there's no way that's more elegant
than this :/
Change-Id: I3b56e17487c9df839e67ed390a1ff89979683e8e
The new function will check the RAN type and dispath to
f_bssap_compl_l3() in case of 2G/GERAN and to f_ranap_initial_ue()
on case of 3G/UTRAN.
Change-Id: Ia27afa265d441d1a0cbb40cc2d938aff46fa25f9
Particularly the C++ files generated for the rather comprehensive
3GPP asn.1 specified protocols like MAP, RANAP, ... result in very
large source files and subsequently g++ processes that consume well
into the multiple gigabyte range of memory.
Let's use the '-U 5' option to ask the ttcn3_compiler to split all
c++ files into 5 chunks, resulting in more files to compile, but
smaller individual files.
I also tested '-U type' before, but it was still grinding my 16GB RAM
laptop to unusable deep-swapping state when running 'make -j8' for
the IuCS extended MSC test suite.
Change-Id: I013b623e98d58a39dd7bb2b0db4a911725028535
The module parameter mp_ipa_up_delay ads a delay after the ipa bring up.
This is relevant for the tests with real BTS hardware, but it is not
relavent for the regular TTCN3 tests.
Lets set the default to 0.0, since the delay caused problems with
TC_rsl_ms_pwr_ctrl and TC_si_sched_13_2bis_2ter_2quater.
Change-Id: I7663cad5df1ee5a8bcdbbf522881999f1be9f4fe
Related: OS#3960
So far, RAN_Emulation only handled BSSAP and hence could be used
to emulate BSCs towards the MSC. Let's extend it with RANAP support
so we can also emulate RNCs towards the MSC.
We try to share as much code and logic as possible betweeb the two.
Related: OS#2856, OS#2857
Change-Id: Ie79bda764162e5c5a42608bde5c5f486ea531f33
This patch introduces protocol codecs for the HNBAP, RUA and RANAP
protocols, which is mandatory for testing IuCS, IuPS or Iuh in
the future.
As Eclipse TITAN ASN.1 only supports the BER codec and the above
protocols all use APER, we need to use an external transcoder from
APER to BER and vice-versa. This was implemented using a proprietary
ASN.1 compiler / trnaslator which sysmocom is packaging as
libfftranscode, which is made available as binary package
for Debian 9 at https://ftp.osmocom.org/binaries/libfftranscode/
Related: OS#2856, OS#2857, OS#2858
Change-Id: If4a72de9bc54d6e6a7daaca78a4d4aa5684203a5
The RAN_Emulation currently unconditionally provides BSSAP and MGCP support.
Let's re-structure the code so that support for those protocols is now
possible to enable/disable at compile time.
This patch is in preparation of introducing RANAP support in RAN_Emulation.
Change-Id: Id53ba3ff05f9946230e0e4a759245de14a0f9fbd
Related: OS#2856
This test case reproduces a bug in OsmoSGSN where it would crash
as a result to sending LLC NULL frames.
Change-Id: I38326f2ebaaff009d4357edad9511ce2ce7736fd
Related: OS#3952
When running tests with real hardware it is important to wait for some
time (3 sec. should be enough) before exiting f_init(). This is to
ensure that the BTS supplies a stable carrier before the test proceeds.
Change-Id: Ib78633a33a15cd40514e15b6ebf9a0a8fb7b9c68
Related: OS#3863
The default value for the module parameter mp_ipa_up_timeout is set to
10 sec. Given that the sysmobts needs around 10-11 sec. to perform one
restart cycle this is to low and causes tests to fail occasionally. Lets
increase the default value to 15 sec to get reliable.
Change-Id: I5bb290d00a02a25672305688352a03f3bf484ff3
Related: OS#3863
According to 3GPP TS 04.60, section 11.2.5a, the extended (11-bit)
Access Burst on RACH/PRACH is used by the MS to indicate its EGPRS
capability. One of the alternative synch. sequences (see 3GPP TS
05.02, TS1 and TS2) shall be used.
Add a test case to verify extended (11-bit) RACH decoding.
Depends: (OsmocomBB) I36fd20cd5502ce33c52f644ee4c22abb83350df8
Change-Id: I8fe156aeac9de3dc1e71a4950821d4942ba9a253
Related: OS#1854
According to 3GPP TS 04.60, section 11.2.5a, the extended (11-bit)
Access Burst on RACH/PRACH is used by the MS to indicate its EGPRS
capability. One of the alternative synch. sequences (see 3GPP TS
05.02, TS1 and TS2) shall be used.
Change-Id: If037cb2f2687697f168d10a033eeb20d20183328
Related: OS#1854
This allows to start ConnHdlr on specific RAN connections, i.e.
on different emulated BSCs (and soon RNCs).
Change-Id: I3d7ec567a7b69d8c6f79d26971bf1c94e077d5f5
So far, BSSMAP_Emulation supported only a transport over BSSMAP.
However, we soon intend to merge support for RANAP in order to
simulate RANAP/Iu connections as well as BSSMAP. Let's start
by renaming some of the existing types/functions/ports/modules
without introducing any functional changes just yet.
Related: OS#2857, OS#2856
Change-Id: Iecbcb0c6c136baad9460eca40606bb4010d8882d
PCU is using BcdMccMnc as it's encoded as 24.008.
But SGSN code is using it as it would be byte by byte
sorted.
Fixes: OS#3878
Change-Id: Ie8f67f16f18e4c5090bc5a4c46a866a7e7e00206
An MSC might decide to repeatedly retry Paging if it failed the first time, but
osmo-msc currently has no such mechanism. Instead, it so far had a bug that
retriggered a failed Paging from a start in a situation where there are SMS
pending for only one subscriber, and sending the SMS fails. osmo-msc patch
I24bf9f1c1167efe1080ae4cf47ed2ef0bd981e49 changes this behavior to accept a
Paging failure and not launch the same SMS again numerous times.
Adjust the tests to this new behavior.
Depends: I24bf9f1c1167efe1080ae4cf47ed2ef0bd981e49 (osmo-msc)
Change-Id: I7dce12942a65eaaf97f78ca69401c7f93faacb9e
If an MT SMS is triggered and not handled in the test, it is so far left behind
when the test ends. That causes Paging to retrigger for that SMS at any later
point during subsequent test runs, causing stray bogus test failures.
Actually remove the SMS from the SMS database and the queue with a new VTY
command: The vty command to clear failed SMS from the db is added in osmo-msc
I637cbd7adc075a192f49752b38779391472ff06d
Depends: I637cbd7adc075a192f49752b38779391472ff06d (osmo-msc)
Change-Id: I4ff05187131e93f5bc58dc7ea44546f770e5b4c1
Currently we do not simulate a situation where the HLR is unreachable to
the MSC. Lets add a test wehere the HLR is disconnected and an LU via
SGsAP is tried. The SGs interface should then carry out a reset
procedure.
Change-Id: I830d0b936cbe9d73d1e0b1f4792c2be3d0b08cb9
Related: OS#3859
The GSUP link between testsuit and osmo-msc is currently on by default
and can not be disabled. However, there may be situations where a
missing GSUP connection must be simulated. Lets add add a parameter to
disable GSUP if necessary.
Change-Id: I7c86aa0a906a0d7e8be765f9109a65b4b4387bc6
Related: OS#3859
The Template tr_SGsAP_RESET_IND is invalid since it requires vlr and mme
name at once, which is not a valid constellation in the real world. Lets
have two separate templates, one for MME and VLR, just like we have it
already with the ts_ versions of the templates.
Change-Id: Ifdf6030bb42ebd99c2030d600e87127e3619d7ad
Related: OS#3859
When a subscriber is detached from non eps services, it gets fully
detached from 2G, which means that the VLR is supposed to remove the
subscriber. Lets check if the subscriber is in deed no longer known by
the VLR.
Change-Id: I2ec3f548dfcf5a9b99f10214a8bfd0c6978e253b
Related: OS#3614
We have a testcase that sends an explicit (UE-Initiated) imsi detach
from EPS services. Lets also cover the case for an implicit
(Network-initated) detach.
Change-Id: I63ebc32ae457dd74214d4abee4f511cde28de4a7
Related: OS#3614
We have a testcase that sends an explicit (UE-Initiated) imsi detach
from non EPS services. Lets also cover the case for an implicit
(Network-initated) detach.
Change-Id: I76049e6717680c54c18f97b7cd51944901a81ae7
Related: OS#3614
The control interface of osmo-msc is able to return a list with all
active subscribers from the VLR. Lets add a function, so that we can
check from TTCN3 if a specified subscriber is known by the VLR or not.
Change-Id: I7661ae55afe34795c3701d59795331b32d64c988
Related: OS#3614
In the most use cases of f_SS_expect() we are not interested in
GSUP_PDU returned by this function. Calling it without storing
the returned value causes TTCN-3 compiler to complain:
warning: The value returned by function
`@HLR_Tests.f_SS_expect' is not used
Let's make use of previously unused variable 'res', and save
the returned GSUP_PDU to make the TTCN-3 compiler happy.
Change-Id: Ifda42aa18af8076013b436364513296b2b008731