We must respect this flag not only in "normal" PDUs but also
in the code path processing the "expect" handling.
Change-Id: I04a9197ac0b68c2dcb7542d035dc70c9f2b90473
In the out-of-this-BSC handover tests, a neighbor config of LAC 99 left
behind from a previous test obstructed the test from working:
% BTS 0 already had neighbor LAC:99 ARFCN-BSIC:123-45
% ERROR: duplicate Cell ID in neighbor config, with differing ARFCN+BSIC: LAC:99 ARFCN-BSIC:123-any
Add a 'no neighbor lac 99' before configuring the neighbor via VTY.
Also add the missing neighbor config to
f_tc_srvcc_eutran_to_geran_ho_out_main().
Affects tests:
BSC_Tests.TC_ho_out_of_this_bsc
BSC_Tests.TC_srvcc_eutran_to_geran_ho_out
BSC_Tests.TC_srvcc_eutran_to_geran_ho_out_forbid_fast_return
Change-Id: I7a7c97a47a06abb59c0d89638c6b503ab66eb359
This should hopefully fix HNB_Tests errors showing up in jenkins after
the test finishes:
Iuh_Emulation.ttcn:203 Dynamic test case error: Port HNBAP has neither connections nor mappings. Message cannot be sent on it.
Change-Id: Ide201425e81dcfe2fd395d820bdcbd74f5415ef5
As seen when running a test:
IuUP_Emulation.ttcn:150 Dynamic test case error: While RAW-encoding type '@IuUP_Types.IuUP_PDU': There are insufficient bits to encode '@IuUP_Types.IuUP_PDU_Type_0.frame_nr'
Change-Id: Ic9e69115c49545a7b9797d8f85568d5e91dfb329
Bring it in-line with all other test components: user-facing ports at
the top, IUT-facing ports at the bottom.
Change-Id: I1001601f5bb7c9beb40fd0ddd404c55e3d211608
* t_RSL_IE_ActType_PDCH is actually a constant, not a template.
* tr_RSL_CHAN_ACT_PDCH makes no use of parameter 'mode'.
* Accomplish tr_RSL_CHAN_ACT_PDCH with a send template.
* Use 'present' qualifier for receive template parameters.
Change-Id: Ie62a92daaacf4de5f05dd1f3f5b4a2a5e4ee6dd6
Prevent the script from idling for several minutes without any output if
obtaining the talloc report does not work. It seems to get killed
eventually, but trying for 5s should be enough.
Change-Id: I1bc5baeb94ecd25e1cdab98b060b99747c19d1f9
After replacing debian-stretch-titan with debian-bullseye-titan, tcpdump
does not run anymore, the binary is in /usr/bin and not in /usr/sbin.
Related: OS#4969
Change-Id: I18c88c45c7522c1120ca42cd48d67fe8f155cd39
According to feedback received from TITAN developers in
https://www.eclipse.org/forums/index.php?t=msg&th=1106652&goto=1848616&#msg_1848616
the use of alive-type components has the following advantage:
> Also the DTE during the shutdown can be avoided to use alive type
> components. The test ports of the alive components are not
> disconnected/unmapped when the component finished only when killed or
> the MTC terminated.
So the idea of this patch is to use alive-type components for all the
underlying infrastructure, such as the *_Emulation_CT starting from M3UA
to SCCP and further up the stack. This way, only the MTC and the
highest level of components (such as ConnHdlr) remain as normal
components.
The hope is that using more alive-type components in the lower protocol
layer emulations will reduce the probability of DTE during shutdown if
some message is received during the component shutdown after the MTC
has completed.
Change-Id: I61d791d6d1bfe9226aabbe223baafc5f8f6d4f04
According to RFC 6733, section 3 "Diameter Header", if the 'R' bit
is set, the message is a request. If the 'P' bit is set, the
message may be proxied, relayed, or redirected.
ts_DIA_AIR is a template for Authentication Information *Request*,
so the 'R' bit must be set. Also, let's allow this message to be
proxied, relayed, or redirected by setting the 'P' bit by default.
In tr_DIA_AIR, do not match all command flags, just ensure that
the message is a request. Other flags do not matter.
Change-Id: I7db3b632189eed09c1bdf98f9d588491d928e2f5
Related: SYS#5602
* Make both {hbh,ete}_id parameters last among the others;
* Use more elegant and consistent template formatting;
* Make DestinationRealm value configurable;
* Make SessionId value configurable.
Change-Id: Iaf6472fecbadd58e86b78c59348d9924ab57f97d
Related: SYS#5602
* Make both {hbh,ete}_id parameters last among the others;
* Use more elegant and consistent template formatting;
* Make Origin{Host,Realm} values configurable;
* Make DestinationRealm value configurable;
* Make SessionId value configurable.
Change-Id: I0585e306a87453c212c6b5ac5635181c47b34b4f
Related: SYS#5602
Having default values for these parameters allows omitting them
in subsequent send template definitions based on ts_DIAMETER.
Change-Id: I714b18bbe77949593803e999d25e4ef8e1827917
Related: SYS#5602
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: I8ab8f1e79fcc38d889cce4eac2e90cd4e5582b1b
It's better if we run ttcn3-bts-test with the default values, given
that they were significantly reduced some time ago.
Change-Id: Id97e848e5dfd0b6c504d06f62642511cfd5a0f66
Related: I7da3d0948f38e12342fb714b29f8edc5e9d0933d (osmo-bts)
Related: OS#4487
Otherwise it's impossible to run the CBSP test cases locally, because
the remote peer address in osmo-bsc gets set to '0.0.0.0', so indeed
it cannot establish connection to the server.
Change-Id: I5b1d215818255717ed955c9f1a9c45505ab11a65
Fixes: OS#5351
Harald Welte
Daniel Willmann
Neels Hofmeyr
Pau Espin
Vadim Yanitskiy
Oliver Smith