Three tests fail after recent patch
"bsc: properly clean up conn after each test"
I9396efcabc085d2850244c6468b83c5f3a3ff3a2
In TC_assignment_emerg_setup_deny_bts(), do not expect an RR Rel.
In TC_assignment_emerg_setup_deny_msc() and TC_cm_reestablishment(),
drop the additional f_expect_dlcx_conns().
Related: OS#5337
Change-Id: I1d1d27f0927e640a430b24c6dc3d5d851a5c4cb9
Make all tests clean up BSSAP conn and RSL link. Now all
f_verify_talloc_count() in f_shutdown_helper() should pass, verifying no
conn or bsc_subscr leaks.
Related: OS#5337
Change-Id: I9396efcabc085d2850244c6468b83c5f3a3ff3a2
ACK any MGCP DLCX or RLL REL REQ during f_perform_clear(), which makes
it more universally applicable to invoke at the end of a test.
Related: OS#5337
Change-Id: Ie5b77c266a5d8f47edd187c474df281a799a81de
Invoke f_verify_talloc_count() for bsc_subscr and
gsm_subscriber_connection, expecting none to remain after each test.
This makes numerous tests fail, where the test does not properly release
the RSL and BSSAP connections. An upcoming patch fixes all of those
cases: I9396efcabc085d2850244c6468b83c5f3a3ff3a2
Related: OS#5337
Change-Id: I69d4c5c6f8d499bb7f0b96a48af045361433c57b
Counts talloc objects via VTY and waits for a specific object count.
Useful to test against leaks.
The intended use is to check against leakage of bsc_subscr and
gsm_subscriber_connection after each BSC_Tests.*, see patch in 'Related'
below.
Related: OS#5337
Related: I69d4c5c6f8d499bb7f0b96a48af045361433c57b (osmo-ttcn3-hacks)
Change-Id: Iafe720a4931270e868f40c4f623d10bb9c14dc80
To be able to invoke perform_clear() also in tests where the VTY isn't
used, in f_logp() only access the VTY when it is actually ready.
Otherwise this causes an error and a failed test, for no good reason.
Related: OS#5337
Change-Id: I8116075f32937bd06ba14b426010bf6fec2ef402
The old values are not valid anymore when running against open5gs
version 2.4.2. Most likely, the default addresses got changed
during the PGW split-up (now it's open5gs-smfd and open5gs-upfd).
Change-Id: I3dd7d1f0d4aebb94b8859e8d12e952917de35071
Related: SYS#5602
open5gs-smfd version 2.4.2 requires this IE to be present:
[smf] INFO: [Added] Number of SMF-UEs is now 1 (../src/smf/context.c:820)
[smf] INFO: [Added] Number of SMF-Sessions is now 1 (../src/smf/context.c:2610)
[smf] ERROR: No Serving Network (../src/smf/s5c-handler.c:101)
[smf] ERROR: No Data in Serving Network (../src/smf/s5c-handler.c:105)
[smf] ERROR: Invalid Len[0] in Serving Network (../src/smf/s5c-handler.c:110)
Change-Id: Idf6d147cc4a37996ee4ae6de18158b0e140d9db6
Related: SYS#5602
This change fixes the following error:
Dynamic test case error: None of the branches can be chosen in
the alt statement in file GTPv2_Emulation.ttcn
between lines 362 and 370.
which may happen when osmo-uecups-daemon fails to create a tunnel
due to insufficient permissions.
Change-Id: Icb229aed7fa9dedcf999837ec6ad249ab4fdebb7
Related: SYS#5602
Cause GSM0808_CAUSE_MS_NOT_EQUIPPED is to be transmitted only in the case
BSC receives a RelInd from the MS/BTS. In this test, an ErrorInd is
sent, as in TC_rll_err_ind_sapi_n_reject, so it is expected that the
BSC will send the N_Reject message with cause
GSM0808_CAUSE_BSS_NOT_EQUIPPED.
Related: OS#4728
Related: SYS#5047
Fixes: 999ceb6637
Change-Id: Ieebe3465b31d98fcae0e2c1993477c5021c99b3b
IPA_Emulation component was marked with the "alive" type recently, in
order to avoid race conditions leading to errors during tear down of the
test.
It turns out, the way "alive" keeps the component alive is by means of
not closing the sockets when the component is stopped. As a result,
TC_rsl_drop_counter test stopped working properly because it was
specting a TCP FIN to be sent to osmo-bsc when the component was
stopped.
In order to fix it, add a new CFG port to the IPA_Emulation component on
which one can operate. Add a a new method to tell the component to close
the socket.
Then, put that in BSC_Tests into a function which was actually unsued
until now, and use it in the test in order to have the specific logic
enclosed in a function helper.
Fixes: 7138913d66
Change-Id: I68163b053313d9907ba8e40954a5933d14cb7db6
* Immediate tx of IuUP (N)ACK control packets. Without this, INIT ACK
is delayed until the TX side of the RTP endpoint is enabled.
* Allow and handle IuUP control messages even if g_rx_enabled is false.
* Properly validate user data payload if IuUP is in use.
Change-Id: Id4f8b02a8123bb30b659c40148c8ab4c7c2078a1
Until now, an Init was sent on each RTP transmit period, clogging the
pcap files. Moreover, this is break by design, since transmitting
another Init so close the the previous one would give no time to the
transmitter to receive the Init ACk and move state, which means the
other end would potentially be reconfigured each time (for each Init).
Change-Id: I8e299a3fe49f9d31cae182f7ed4dc0ea3fc22ba2
In the out-of-this-BSC handover tests, a neighbor config of LAC 99 left
behind from a previous test obstructed the test from working:
% BTS 0 already had neighbor LAC:99 ARFCN-BSIC:123-45
% ERROR: duplicate Cell ID in neighbor config, with differing ARFCN+BSIC: LAC:99 ARFCN-BSIC:123-any
Add a 'no neighbor lac 99' before configuring the neighbor via VTY.
Also add the missing neighbor config to
f_tc_srvcc_eutran_to_geran_ho_out_main().
Affects tests:
BSC_Tests.TC_ho_out_of_this_bsc
BSC_Tests.TC_srvcc_eutran_to_geran_ho_out
BSC_Tests.TC_srvcc_eutran_to_geran_ho_out_forbid_fast_return
Change-Id: I7a7c97a47a06abb59c0d89638c6b503ab66eb359
This should hopefully fix HNB_Tests errors showing up in jenkins after
the test finishes:
Iuh_Emulation.ttcn:203 Dynamic test case error: Port HNBAP has neither connections nor mappings. Message cannot be sent on it.
Change-Id: Ide201425e81dcfe2fd395d820bdcbd74f5415ef5
As seen when running a test:
IuUP_Emulation.ttcn:150 Dynamic test case error: While RAW-encoding type '@IuUP_Types.IuUP_PDU': There are insufficient bits to encode '@IuUP_Types.IuUP_PDU_Type_0.frame_nr'
Change-Id: Ic9e69115c49545a7b9797d8f85568d5e91dfb329
Bring it in-line with all other test components: user-facing ports at
the top, IUT-facing ports at the bottom.
Change-Id: I1001601f5bb7c9beb40fd0ddd404c55e3d211608
* t_RSL_IE_ActType_PDCH is actually a constant, not a template.
* tr_RSL_CHAN_ACT_PDCH makes no use of parameter 'mode'.
* Accomplish tr_RSL_CHAN_ACT_PDCH with a send template.
* Use 'present' qualifier for receive template parameters.
Change-Id: Ie62a92daaacf4de5f05dd1f3f5b4a2a5e4ee6dd6
Prevent the script from idling for several minutes without any output if
obtaining the talloc report does not work. It seems to get killed
eventually, but trying for 5s should be enough.
Change-Id: I1bc5baeb94ecd25e1cdab98b060b99747c19d1f9
After replacing debian-stretch-titan with debian-bullseye-titan, tcpdump
does not run anymore, the binary is in /usr/bin and not in /usr/sbin.
Related: OS#4969
Change-Id: I18c88c45c7522c1120ca42cd48d67fe8f155cd39
According to feedback received from TITAN developers in
https://www.eclipse.org/forums/index.php?t=msg&th=1106652&goto=1848616&#msg_1848616
the use of alive-type components has the following advantage:
> Also the DTE during the shutdown can be avoided to use alive type
> components. The test ports of the alive components are not
> disconnected/unmapped when the component finished only when killed or
> the MTC terminated.
So the idea of this patch is to use alive-type components for all the
underlying infrastructure, such as the *_Emulation_CT starting from M3UA
to SCCP and further up the stack. This way, only the MTC and the
highest level of components (such as ConnHdlr) remain as normal
components.
The hope is that using more alive-type components in the lower protocol
layer emulations will reduce the probability of DTE during shutdown if
some message is received during the component shutdown after the MTC
has completed.
Change-Id: I61d791d6d1bfe9226aabbe223baafc5f8f6d4f04
According to RFC 6733, section 3 "Diameter Header", if the 'R' bit
is set, the message is a request. If the 'P' bit is set, the
message may be proxied, relayed, or redirected.
ts_DIA_AIR is a template for Authentication Information *Request*,
so the 'R' bit must be set. Also, let's allow this message to be
proxied, relayed, or redirected by setting the 'P' bit by default.
In tr_DIA_AIR, do not match all command flags, just ensure that
the message is a request. Other flags do not matter.
Change-Id: I7db3b632189eed09c1bdf98f9d588491d928e2f5
Related: SYS#5602
* Make both {hbh,ete}_id parameters last among the others;
* Use more elegant and consistent template formatting;
* Make DestinationRealm value configurable;
* Make SessionId value configurable.
Change-Id: Iaf6472fecbadd58e86b78c59348d9924ab57f97d
Related: SYS#5602
Harald Welte
Neels Hofmeyr
Vadim Yanitskiy
Pau Espin
Daniel Willmann
Oliver Smith