This is useful to bring up channels not only in signalling mode, but
also in actual TCH/speech mode.
Change-Id: I91677b3f471ffcf83dd30a345b50375ce6a88656
The purpose of the various IP addresses used by our GGSN tests is not
immediately clear. Add documentation based on the current status quo.
Change-Id: I079efcff3dab09d71330625f5b661cd81e42bf38
Start and stop the CTRL interface and provide CTRL bind interface config
modulepars.
Possibly everyones' local setups may need modification to allow the
ttcn3-bts-tests to reach osmo-bts-trx's CTRL port.
WARNING: This commit has to be merged "at the same time" as
I1ec86b157ebd46bf622a0ca51eba225f15c99fbb or the jenkins ttcn3-bts-tests will
fail.
a) if we want to set a modulepar mp_ctrl_ip here, it needs to be added to
osmo-ttcn3-hacks.
b) if we have the f_ipa_ctrl_start() in osmo-ttcn3-hacks, we need to configure
the proper IP and bind interface here, or all tests will fail because
f_ipa_ctrl_start() cannot connect.
Change-Id: I502b4891e6720ae2fb251c03542f707880a6f728
Various improvements to the comments documenting packet templates
used in GGSN_Tests: fix IPv4 vs. IPv6 confusion, clearly indicate
whether templates are used for sending or for receiving/matching
packets, and add a missing comment.
Found while studying code to prepare for issue OS#2519.
Change-Id: I3bfc21a5ba74e0505457e4874f93501ad7c68b7b
Related: OS#2519
In Change-Id: I52a4c8118828c1605cf672889982f987568ad17d we introduced
config file syntax errors. It seems that change was not tested at all
before pushing :(
Change-Id: I80577798b502957afaa46abb510bcca3dc174ee4
The existing MGW tests were entirely on the MGCP side. Let's start
some tests that exchange RTP frames with the MGW and validate that
the MGW can actually act on what is configured via MGCP.
Change-Id: If620d5f8927d0e3584e90a7a8f785c6fdd7c2d17
The connection ID part of the template must be updated after we
created the respective sockets. It was done to early.
Change-Id: I37306d841df3d27d30fd89fb99c863370517e3ff
In order to form a minimal HANDOVER REQUIRED message additional
Templates (ts_) are needed.
- Add Template ts_BSSMAP_IE_SpeechVersion
- Add Template ts_BSSMAP_IE_CurrentChannelType1
- Add Template ts_BSSMAP_IE_OldToNewBSSInfo
Change-Id: I41c2a036465d422db9348d4d2d66bb332e16e155
Related: OS#1609
The upcomming tests for inter-BSC handover make it necessary to
simulate multiple (two) BSCs to the MSC, while the current
Implementation can only handle one BSC instance at a time.
- Allow multiple BSC instances to be created
- Add a simple reset-test to test what happens when
two BSC instances are started (BSSMAP reset from two
different BSCs)
Change-Id: I52a4c8118828c1605cf672889982f987568ad17d
Related: OS#1609
The MMSC_Tests.cfg config file lacks most of the test comments.
- make sure the control section of MSC_Tests.ttcn and MSC_Tests.cfg
match up.
Change-Id: I89e6c65427a993261cab6a284e6cc3dbc5a5562f
* SCCP changes were merged upstream, we don't need to use osmocom fork
* SCCP upstream now has proper tag based version
* M3UA now has a new version tag (with Routing Context)
* UNIX_DOMAIN_SOCKET has new verison tag (upstream requested changes)
Change-Id: I5526c1688d84cf985299baa973271a620b4b4544
When the Makefile was modified to use a new tag/hash of a given
repo, the "make update" or "make clean" target will fail as the
new version/tag is not yet known to the local repo, only to the
remote (and hence we need a fetch).
Change-Id: I52c44c744674cd4dab0c85086d68bde6f9be1fca
At the moment we use onle TCH/F and PDCH in our osmo-bsc config,
but the tests TC_assignment_codec_amr_h and TC_assignment_codec_h
requre a half rate channel in order to work. Configuring one TCH/F
to TCH/H seems not to hurt any tests except TC_chan_exhaustion
- also regard half rate channels in TC_chan_exhaustion
- change included sample osmo-bsc.cfg
Change-Id: Idd5a9602f1b49b5aa0fc510faa151fe16c0b404d
Related: OS#3100
In server mode, we need to handle SETUP_REQ in ExpectedCreateCallback,
not only SETUP_IND like in client mode.
Change-Id: I988668cac9970af12d59d05a3a9facca257851c6
Let's not only match if the BSSMAP ASSIGNMENT COMPL matches what codec
was requested in BSSMAP ASSIGNMENT CMD, but also verify that the
RSL side channel was activated with the right channel mode IE.
Change-Id: I6ef24b5b82a5c100ffffe056adadd26e69b968b9
The LastActTable stores a copy of the decoded RSL CHAN_ACT for
each channel number. This can be used by a RSL_DchanHandler to
learn parameters of its own activation.
Change-Id: I629d66e27cbe4c8b02e704a7181b3bff843e9aa4
The previous Makefile rules would always overwrite uncommitted
local changes within repositories under the deps directory.
Let's assume that somebody who has local changes inside dependencies
knows what they are doing, and eliminate the risk of discarding
results of their work. Always skip repositories which contain
local changes. Only print a warning about such repositories.
Nothing changes for people who do not modify dependencies.
While testing this change, I noticed that the 'make distclean' target
was not reachable via 'make distclean', and I've fixed this as well.
Related: OS#3090
Change-Id: I0ee4ed70868b1c1efa39ad2bf200bf59ae2a2019
The functions f_mt_call and f_mo_call establish a call, hold it
for 3 sec. and tear it down again. However, there may be test
situation where one wants to establish a call and then hold it
in order to perform other actions.
- split up the function into an _establish and _hangup part.
- add a replacement f_mt_call and f_mo_call function for the
already existing testcases
Change-Id: I0da9cf64d10de4036eb037ef5e491bfe3088670b
The settings concerning the IPA ping are a leftover from the
time where osmo-bsc used an IPA multiplex to support the the
SCCP lite A interface dialect. Since the related code is now
removed and osmo-bsc has been migrated to libosmo-sccp and
real AoIP interface, the configuration is no longer needed.
Change-Id: If67cdba2a043c5dbf23f998659c5000db924a7df
Make sure that the "tag" member of the RslChanelNr sub-structure
is always initialized. This can be achieved without any extra code
by using the existing templates rather than hand-coding it.
Change-Id: I990ac8ac0ce51e11f1d683382c9fc2d4e1201aa7
The problem is that Junit-XML doesn't have a mapping for inconclusive
results, and hence they show up as 'passed'.
By introducing this change, we make sure all tests that don't pass
show up as failed.
Change-Id: Iddd13d0055c91f9bd304ce9833fba0485abf4c4e
Add rules to deps/Makefile which ensure that 'make deps' puts the git
repositories of dependencies into a known state. In particular, set
the origin remote url to a known value, and check out a known commit
into the work tree.
This change ensures that ttcn3 builds run with 'make' will always use
correct versions of dependencies.
The 'make update-deps' now has the same effect as 'make deps', but it
is not yet removed in case build scripts rely on its existence.
The new 'make deps' target is fast enough to be run before every build.
Change-Id: I561eee7e12d976cd2265ba1bb8cd22dd8c1a0735
Related: OS#3090
Harald Welte
Stefan Sperling
Philipp Maier