mirror of https://gerrit.osmocom.org/simtrace2
124 lines
5.6 KiB
C
124 lines
5.6 KiB
C
/* octSIMtest with SAM3S board definition
|
|
*
|
|
* (C) 2019 by sysmocom -s.f.m.c. GmbH, Author:Joachim Steiger <jsteiger@sysmocom.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
|
|
*/
|
|
#pragma once
|
|
#include "board_common.h"
|
|
#include "simtrace_usb.h"
|
|
|
|
/* Name of the board */
|
|
#define BOARD_NAME "OCTSIMTEST"
|
|
/* Board definition */
|
|
#define octsimtest
|
|
|
|
/** oscillator used as main clock source (in Hz) */
|
|
#define BOARD_MAINOSC 18432000
|
|
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
|
|
#define BOARD_MCK 58982400 // 18.432 * 16 / 5
|
|
|
|
/** Pin configuration **/
|
|
|
|
/** there is no red LED, but the code needs this second LED, thus we provide an unused pin */
|
|
#define PIO_LED_RED PIO_PB13
|
|
/** MCU pin connected to green LED, which is actually amber, and the logic is inverted since it is connected to an NPN transistor (used as open drain) */
|
|
#define PIO_LED_GREEN PIO_PA4
|
|
/** red LED pin definition */
|
|
#define PIN_LED_RED {PIO_LED_RED, PIOB, ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** green LED pin definition */
|
|
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** LEDs pin definition */
|
|
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
|
/** index for red LED in LEDs pin definition array */
|
|
#define LED_NUM_RED 0
|
|
/** index for green LED in LEDs pin definition array */
|
|
#define LED_NUM_GREEN 1
|
|
|
|
/* Button to force bootloader start (shorted to ground when pressed */
|
|
#define PIN_BOOTLOADER_SW {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
|
|
|
|
// FIXME PA8 is 32khz xtal on octsimtest
|
|
/* Pull card presence pin high (shorted to ground in card slot when card is present) */
|
|
|
|
/** Phone connection **/
|
|
/* Phone USIM slot 1 VCC pin (VCC_PHONE in schematic) */
|
|
#define PIN_USIM1_VCC {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
/* Phone USIM slot 1 RST pin (active low; RST_PHONE in schematic) */
|
|
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
|
|
/* Phone I/O data signal input/output (I/O_PHONE in schematic) */
|
|
#define PIN_PHONE_IO {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Phone CLK clock input (CLK_PHONE in schematic) */
|
|
#define PIN_PHONE_CLK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Pin used to switch level shifter in I/O line between rx (0) and tx (1) */
|
|
#define PIN_USIM1_IO_DIR {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/* Pin used for phone USIM slot 1 communication */
|
|
#define PINS_USIM1 PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST, PIN_USIM1_IO_DIR
|
|
/* Phone I/O data signal input/output (unused USART RX input; connected to I/O_PHONE in schematic) */
|
|
#define PIN_PHONE_IO_INPUT {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Pin used as clock input (to measure the ETU duration; connected to CLK_PHONE in schematic) */
|
|
#define PIN_PHONE_CLK_INPUT {PIO_PA29B_TCLK2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
|
|
/** Default pin configuration **/
|
|
|
|
/** External SPI flash interface **/
|
|
/* SPI MISO pin definition */
|
|
#define PIN_SPI_MISO {PIO_PA12A_MISO, PIOA, PIOA, PIO_PERIPH_A, PIO_PULLUP}
|
|
/* SPI MOSI pin definition */
|
|
#define PIN_SPI_MOSI {PIO_PA13A_MOSI, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* SPI SCK pin definition */
|
|
#define PIN_SPI_SCK {PIO_PA14A_SPCK, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* SPI pins definition. Contains MISO, MOSI & SCK */
|
|
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SCK
|
|
/* SPI chip select 0 pin definition */
|
|
#define PIN_SPI_NPCS0 {PIO_PA11A_NPCS0, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* SPI flash write protect pin (active low, pulled low) */
|
|
#define PIN_SPI_WP {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
/** USB definitions */
|
|
/* OpenMoko SIMtrace 2 USB vendor ID */
|
|
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
|
|
/* OpenMoko SIMtrace 2 USB product ID (main application/runtime mode) */
|
|
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_OCTSIMTEST
|
|
/* OpenMoko SIMtrace 2 DFU USB product ID (DFU bootloader/DFU mode) */
|
|
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_OCTSIMTEST
|
|
/* USB release number (bcdDevice, shown as 0.00) */
|
|
#define BOARD_USB_RELEASE 0x000
|
|
/* Indicate SIMtrace is bus power in USB attributes */
|
|
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
|
|
|
|
#define DETECT_VCC_BY_ADC
|
|
/* we have a resistive voltage divider of 47 + 30 kOhms to also detect 5V supply power */
|
|
#define VCC_UV_THRESH_1V8 (1500000*47)/(47+30)
|
|
#define VCC_UV_THRESH_3V (2500000*47)/(47+30)
|
|
|
|
#define HAVE_SLOT_MUX
|
|
|
|
#define HAVE_BOARD_CARDINSERT
|
|
struct cardem_inst;
|
|
void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
|
|
|
|
/** Supported modes */
|
|
/* SIMtrace board supports sniffer mode */
|
|
//#define HAVE_SNIFFER
|
|
/* SIMtrace board supports CCID mode */
|
|
//#define HAVE_CCID
|
|
/* SIMtrace board supports card emulation mode */
|
|
#define HAVE_CARDEM
|
|
/* SIMtrace board supports man-in-the-middle mode */
|
|
//#define HAVE_MITM
|
|
/* octsimtest board supports gpio_test mode */
|
|
#define HAVE_GPIO_TEST
|