SIMtrace2 (based on AT91SAM3), firmware and host tools, including card emulation
Go to file
Oliver Smith e6e77399d6 firmware/Makefile: don't use distribution's CFLAGS
Set CFLAGS on top of the Makefile, to avoid using the distribution's
default CFLAGS. In debian testing and unstable, -fcf-protection was
recently added to the default CFLAGS, but it cannot be used with the
cross compiler:

  [COMPILING libosmocore/source/backtrace.c]
  cc1: error: '-fcf-protection=full' is not supported for this target
  make[2]: *** [Makefile:270: obj/simtrace/flash_backtrace.o] Error 1

Change-Id: I5f7cd0402f9bb85dd600204fdf8855773ddbeb70
2023-09-13 15:33:48 +00:00
contrib contrib/jenkins: tweak shell logic 2023-05-16 10:13:30 +02:00
debian debian: set compat level to 10 2023-04-26 11:33:51 +02:00
firmware firmware/Makefile: don't use distribution's CFLAGS 2023-09-13 15:33:48 +00:00
hardware board_gpio.gnumeric: Add ngff-cardem pin-out 2021-07-01 23:28:52 +02:00
host simtrace2-cardem-pcsc: mark reset events in GSMTAP trace 2023-07-21 13:03:38 +02:00
.checkpatch.conf Cosmetic: fix CI errors 2023-04-25 17:53:11 +02:00
.clang-format add our default clang-format file 2021-11-01 14:35:14 +01:00
.gitignore gitignore: add missing entries binaries 2022-01-11 17:09:38 +00:00
.gitmodules use same USB Product ID for DFU and runtime mode 2017-05-05 00:34:28 +02:00
.gitreview gitreview: new file 2021-07-30 10:32:35 +02:00
Makefile firmware: add bootloader update "app" 2021-11-01 12:03:38 +00:00 Update README 2020-10-27 15:55:07 +01:00
TODO-RELEASE Introduce support for asynchronous USB transmission 2020-05-25 23:00:20 +02:00 clk calculation: updated max mul val 2015-02-20 14:40:07 +01:00
git-version-gen ensure git version ends up in firmware image 2016-03-19 21:37:55 +01:00

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware

The host software includes

  • libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
  • simtrace2-list - list any USB-attached devices running simtrace2 firmware
  • simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
  • simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader