SIMtrace2 (based on AT91SAM3), firmware and host tools, including card emulation https://osmocom.org/projects/simtrace2
Go to file
Harald Welte bd9d94994d v0.5 debian package release
Change-Id: Iaf56c03f966a5dfc8b750d926f0429223aeec54e
2018-08-26 10:37:39 +02:00
contrib jenkins: add simtrace/trace to the builds 2018-08-07 19:01:25 +02:00
debian v0.5 debian package release 2018-08-26 10:37:39 +02:00
firmware owhw: Fix cardem GPIO initialization pointer value 2018-08-26 10:20:05 +02:00
hardware board_gpio.gnumeric: Update to QMOD v3 (SIMPRES1/SIMPRES2) 2017-05-05 23:17:31 +02:00
host Makefiles: Add "make install" target 2018-08-26 10:09:43 +02:00
.gitignore add simtrace2-list to .gitignore 2017-03-06 21:05:44 +01:00
.gitmodules use same USB Product ID for DFU and runtime mode 2017-05-05 00:34:28 +02:00
Makefile add master Makefile to build firmware and host tools 2018-08-26 10:20:02 +02:00
README.md Add README.md 2018-05-11 15:48:54 +02:00
clk_calc.py clk calculation: updated max mul val 2015-02-20 14:40:07 +01:00
git-version-gen ensure git version ends up in firmware image 2016-03-19 21:37:55 +01:00

README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

This is under heavy development, and right now it is not surprising if things still break on a daily basis.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.

The goal is to support the following devices:

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware