sim-card
/
simtrace2
mirror of https://gerrit.osmocom.org/simtrace2
10
0
Fork 0
Code Issues Releases Wiki Activity
SIMtrace2 (based on AT91SAM3), firmware and host tools, including card emulation https://osmocom.org/projects/simtrace2
794 Commits 17 Branches 13 Tags 6.7 MiB
C 94.3%
HTML 2.9%
Makefile 0.9%
Lua 0.6%
Shell 0.5%
Other 0.8%
Go to file
Harald Welte bc62335768 qmod: Disable hub reset and EEPROM erase/write by default 
We recently introduced ALLOW_PEER_ERASE to control if the firmware
should contain code for the SAM3 to reset each other on QMOD.

Let's use the same define to also remove code for putting the USB
hub into reset as well as code for erasing + writing the hub EEPROM.

This is needed only during production, but it shouldn't be enabled
during normal operation of the product at the end user.

Change-Id: I1c8cca2f7f0f0070d7bf1ade676e035c45e4d5ab
 		2019-06-19 20:35:37 +02:00
contrib jenkins: add simtrace/trace to the builds 2018-08-07 19:01:25 +02:00
debian debian/control: Add dependency to libpcsclite-dev 2018-09-23 16:59:23 +02:00
firmware qmod: Disable hub reset and EEPROM erase/write by default 2019-06-19 20:35:37 +02:00
hardware Add minimal board-support for Olimex SAM3-P256 2019-02-28 19:10:07 +01:00
host remsim: fix TPDU response size transmission 2018-10-21 12:29:26 +00:00
.gitignore add simtrace2-list to .gitignore 2017-03-06 21:05:44 +01:00
.gitmodules use same USB Product ID for DFU and runtime mode 2017-05-05 00:34:28 +02:00
Makefile add master Makefile to build firmware and host tools 2018-08-26 10:20:02 +02:00
README.md Add README.md 2018-05-11 15:48:54 +02:00
clk_calc.py clk calculation: updated max mul val 2015-02-20 14:40:07 +01:00
git-version-gen ensure git version ends up in firmware image 2016-03-19 21:37:55 +01:00

README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

This is under heavy development, and right now it is not surprising if things still break on a daily basis.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.

The goal is to support the following devices:

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware