simtrace2/firmware/sam3s_examples_include/pio_capture.h

105 lines
4.4 KiB
C

/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2010, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \page sam3s_ppc SAM3S PIO Parallel Capture
*
* \section Purpose
*
* Interface for configuration the PIO Parallel Capture peripheral.
*
* \section Usage
*
* -# Configurate the interrupt for PIOA, can be done by PIO_InitializeInterrupts()
* -# Initialize the PIO Parallel Capture API by filing the SpioCaptureInit structur.
* 2 options:
* - alwaysSampling: for sample data with or without take in account ENABLE pins.
* - halfSampling: for sample all data or only one time out of two
* -# Call PIO_CaptureInit() for init and enable the PDC, init the PIO capture.
* -# Call PIO_CaptureEnable() for enable the PIO Parallel Capture.
* -# When an interrupt is received, the PIO_CaptureHandler() is call and the respective
* callback is launch.
* -# When the transfer is complete, the user need to disable interrupt with
* PIO_CaptureDisableIt(). Otherway, the PDC will send an interrupt.
* -# The data receive by the PIO Parallel Capture is inside the buffer passed in the
* PIO_CaptureInit().
*
*/
#ifndef PIO_CAPTURE_H
#define PIO_CAPTURE_H
/*----------------------------------------------------------------------------
* Types
*----------------------------------------------------------------------------*/
/** \brief PIO Parallel Capture structure for initialize.
*
* At the end of the transfer, the callback is invoked by the interrupt handler.
*/
typedef struct _SpioCaptureInit {
/** PIO_PCRHR register is a BYTE, HALF-WORD or WORD */
uint8_t dsize;
/** PDC size, data to be received */
uint16_t dPDCsize;
/** Data to be received */
uint32_t *pData;
/** Parallel Capture Mode Always Sampling */
uint8_t alwaysSampling;
/** Parallel Capture Mode Half Sampling */
uint8_t halfSampling;
/** Parallel Capture Mode First Sample */
uint8_t modeFirstSample;
/** Callback function invoked at Mode Data Ready */
void (*CbkDataReady)( struct _SpioCaptureInit* );
/** Callback function invoked at Mode Overrun Error */
void (*CbkOverrun)( struct _SpioCaptureInit* );
/** Callback function invoked at End of Reception Transfer */
void (*CbkEndReception)( struct _SpioCaptureInit* );
/** Callback function invoked at Reception Buffer Full */
void (*CbkBuffFull)( struct _SpioCaptureInit* );
/** Callback arguments.*/
void *pParam;
} SpioCaptureInit ;
/*----------------------------------------------------------------------------
* Global Functions
*----------------------------------------------------------------------------*/
extern void PIO_CaptureDisableIt( uint32_t itToDisable ) ;
extern void PIO_CaptureEnableIt( uint32_t itToEnable ) ;
extern void PIO_CaptureEnable( void ) ;
extern void PIO_CaptureDisable( void ) ;
extern void PIO_CaptureInit( SpioCaptureInit* pInit ) ;
#endif /* #ifndef PIO_CAPTURE_H */