Kevin Redon
80d9476602
the higher baud rate allows for more debugging (without dropping data) and is well supported by USB for UART adapters (this standard baud rate is 8 x 115200). the closest matching integer value is calculated for UART CR. no floating point calculation can be used since this would increase the size of the resulting binary by ~ 2kB (for the softfp). this is not possible for the DFU since it already is close to the maximum size of 16 kB. Change-Id: I82b74f697342d580ccb79ada4715f35f4e8cca86 |
||
---|---|---|
contrib | ||
debian | ||
firmware | ||
hardware | ||
host | ||
.gitignore | ||
.gitmodules | ||
Makefile | ||
README.md | ||
clk_calc.py | ||
git-version-gen |
README.md
SIMtrace v2.0
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
Supported Hardware
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
- Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
- sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
- sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported
This Repository
This repository contains several directory
- firmware - the firmware to run on the actual devices
- hardware - some information related to the hardware
- host - Programs to use on the USB host to interface with the hardware