mirror of https://gerrit.osmocom.org/simtrace2
167 lines
8.2 KiB
C
167 lines
8.2 KiB
C
/* Osmocom ngff-cardem board definition
|
|
*
|
|
* (C) 2021 by Harald Welte <laforge@osmocom.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
|
|
*/
|
|
#pragma once
|
|
#include "board_common.h"
|
|
#include "simtrace_usb.h"
|
|
|
|
/** Name of the board */
|
|
#define BOARD_NAME "NGFF-CARDEM"
|
|
/** Board definition */
|
|
#define ngff_cardem
|
|
|
|
/** oscillator used as main clock source (in Hz) */
|
|
#define BOARD_MAINOSC 12000000
|
|
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
|
|
#define BOARD_MCK 58000000 // 12.000 * 29 / 6
|
|
|
|
/** MCU pin connected to red LED */
|
|
#define PIO_LED_RED PIO_PA17
|
|
/** MCU pin connected to green LED */
|
|
#define PIO_LED_GREEN PIO_PA18
|
|
/** red LED pin definition */
|
|
#define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** green LED pin definition */
|
|
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** LEDs pin definition */
|
|
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
|
/** index for red LED in LEDs pin definition array */
|
|
#define LED_NUM_RED 0
|
|
/** index for green LED in LEDs pin definition array */
|
|
#define LED_NUM_GREEN 1
|
|
/** the green LED is actually red and used as indication for USIM1 */
|
|
#define LED_USIM1 LED_GREEN
|
|
|
|
/* USIM 2 interface (USART) */
|
|
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
|
|
|
|
/* USIM 2 interface (TC) */
|
|
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
|
|
|
|
/* USIM 1 interface (USART) */
|
|
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
|
|
|
|
/* USIM 1 interface (TC) */
|
|
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
|
|
|
|
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
//#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST
|
|
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST
|
|
|
|
/* from v3 and onwards only (!) */
|
|
#define PIN_DET_USIM1_PRES {PIO_PA8, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
|
|
|
|
/* inputs reading the WWAN LED level */
|
|
#define PIN_WWAN1 {PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
|
#define PINS_WWAN_IN { PIN_WWAN1 }
|
|
|
|
#define PIN_MODEM_EN {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define PIN_N_MODEM_PWR_ON {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
/* outputs controlling RESET input of modems */
|
|
#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define PINS_PERST { PIN_PERST1 }
|
|
|
|
#define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
|
|
|
|
/* GPIO towards SPDT switches between real SIM and SAM3 */
|
|
//#define PIN_SIM_SWITCH1 {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
//#define PIN_SIM_SWITCH2 {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
|
|
|
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
|
|
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_NGFF_CARDEM
|
|
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_NGFF_CARDEM
|
|
#define BOARD_USB_RELEASE 0x010
|
|
|
|
#define DETECT_VCC_BY_ADC
|
|
#define VCC_UV_THRESH_1V8 1500000
|
|
#define VCC_UV_THRESH_3V VCC_UV_THRESH_1V8
|
|
|
|
#ifdef APPLICATION_cardem
|
|
#define HAVE_CARDEM
|
|
#define HAVE_BOARD_CARDINSERT
|
|
struct cardem_inst;
|
|
void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
|
|
#endif
|
|
|
|
#ifdef APPLICATION_trace
|
|
#define HAVE_SNIFFER
|
|
#endif
|
|
|
|
/* Card I/O data signal input/output (I/O_SIM in schematic) */
|
|
#define PIN_SIM_IO {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Card CLK clock input (CLK_SIM in schematic) */
|
|
#define PIN_SIM_CLK {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/* Card RST reset signal input (use as input since the phone will drive it) */
|
|
#define PIN_SIM_RST_SNIFF {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
|
|
/* Pins used to sniff phone-card communication */
|
|
#define PINS_SIM_SNIFF PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
|
|
|
|
/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
|
|
#define PIN_SIM_IO_INPUT {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
|
|
#define PIN_SIM_CLK_INPUT {PIO_PA4B_TCLK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/* Pins used to measure ETU timing (using timer counter) */
|
|
#define PINS_TC PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
|
|
|
|
//default state: NO uart connected, modem connected to physical sim, NO sim presence override, modem powers sim slot
|
|
#define pin_conn_usim1_default {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_conn_usim2_default {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_conn_mdm_sim_default {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define pin_conn_set_sim_det_default {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_en_st_sim_vdd_default {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define pin_en_mdm_sim_vdd_default {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
|
|
//cardem state: uart2 (!) connected, NO modem connected to physical sim, sim presence override, NOTHING powers sim slot
|
|
#define pin_conn_usim1_cem {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_conn_usim2_cem {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define pin_conn_mdm_sim_cem {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_en_st_sim_vdd_cem {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define pin_en_mdm_sim_vdd_cem {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
//trace state: uart2 (!) connected, modem connected to physical sim, st powers sim slot
|
|
#define pin_conn_usim1_trace {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_conn_usim2_trace {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define pin_conn_mdm_sim_trace {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define pin_conn_set_sim_det_trace {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_en_st_sim_vdd_trace {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define pin_en_mdm_sim_vdd_trace {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
#define PIN_MODEM_EN_off {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
#define PINS_SIM_DEFAULT pin_conn_usim1_default, pin_conn_usim2_default, pin_conn_mdm_sim_default, pin_conn_set_sim_det_default, PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_default, pin_en_mdm_sim_vdd_default
|
|
#define PINS_SIM_CARDEM pin_conn_usim1_cem, pin_conn_usim2_cem, pin_conn_mdm_sim_cem, pin_en_mdm_sim_vdd_cem, pin_en_st_sim_vdd_cem// , pin_conn_set_sim_det_cem
|
|
|
|
#define PINS_BUS_SNIFF pin_conn_usim1_trace, pin_conn_usim2_trace, pin_conn_mdm_sim_trace, pin_conn_set_sim_det_trace,PIN_MODEM_EN_off
|
|
#define PINS_PWR_SNIFF PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_trace, pin_en_mdm_sim_vdd_trace
|