Harald Welte
17cda3db8a
This is a purely cosmetic change in terms of coding style, but it fixes an [invalid] detection for unterminated value_string arrays by our verify_value_string_arrays_are_terminated.py script: Change-Id: Iee905c744065df1dc54f04be752a65700897a92c ERROR: file contains unterminated value_string 'struct value_string change_flags[]': './deps/simtrace2/host/src/simtrace2-sniff.c' ERROR: file contains unterminated value_string 'struct value_string data_flags[]': './deps/simtrace2/host/src/simtrace2-sniff.c' |
||
---|---|---|
contrib | ||
debian | ||
firmware | ||
hardware | ||
host | ||
.gitignore | ||
.gitmodules | ||
Makefile | ||
README.md | ||
clk_calc.py | ||
git-version-gen |
README.md
SIMtrace v2.0
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
Supported Hardware
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
- Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
- sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
- sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported
This Repository
This repository contains several directory
- firmware - the firmware to run on the actual devices
- hardware - some information related to the hardware
- host - Programs to use on the USB host to interface with the hardware