Kevin Redon ff3d84922d USB: increase USB reset time ... USB reset can be signaled by pulling low USB D+ for at least 10 ms, according to the USB specification. This force a re-enumeration. This time is increased to 20 ms to work with more USB HUBs. Some SAM3S based board have external D+ pull-up mechanism (such as SIMtrace) which needs to be used to pull D+ low. This is a legacy mechanism from SAM7S history. This mechanism is not required anymore on the SAM3S, and the qmod does not use it. When the USB HAL is suspended, the transceiver is disabled, causing D+ and D- to be pulled low. Then the HAL is activated again. This is particularly required when DFU is started (and enumerated), and after flashing the SAM3S switched to the main application (without reset), so it can properly re-enumerate. This board difference is now defined on the board header. Change-Id: I9b58d8101c2fcf5595026b675728826af26127a3		2018-08-07 12:09:49 +02:00
..
include	add synchronous UART transmission and use it in exceptions	2018-08-04 11:16:13 +02:00
source	USB: increase USB reset time	2018-08-07 12:09:49 +02:00