sim-card
/
simtrace2
mirror of https://gerrit.osmocom.org/simtrace2
10
0
Fork 0
Code Issues Releases Wiki Activity
SIMtrace2 (based on AT91SAM3), firmware and host tools, including card emulation https://osmocom.org/projects/simtrace2
728 Commits 16 Branches 13 Tags 6.6 MiB
C 94.3%
HTML 2.9%
Makefile 0.9%
Lua 0.6%
Shell 0.5%
Other 0.8%
Go to file
Kevin Redon f48aac560c sniffing: decrease USB IRQ prioprity to prevent USART overrun 
Change-Id: I870a0aa8e251bbb53249c54bfcaa45de5b5a9486

Handling the USB message queue is done in an ISR and take quite some time.
This can cause a USART/SIM sniffing buffer overrun, resulting in data loss.
By setting the USB IRQ lower than the USART IRQ, the USB ISR can be
interrupted (for short) and no data gets lost.
 		2018-07-03 16:18:00 +02:00
contrib contrib/jenkins.sh: Also run firmware tests + build-test host software 2018-07-01 16:33:25 +02:00
firmware sniffing: decrease USB IRQ prioprity to prevent USART overrun 2018-07-03 16:18:00 +02:00
hardware board_gpio.gnumeric: Update to QMOD v3 (SIMPRES1/SIMPRES2) 2017-05-05 23:17:31 +02:00
host sniffing: move conversion convertion and flag processing from ISR to main loop to keep ISR fast and focus on data capture 2018-07-03 16:10:04 +02:00
.gitignore add simtrace2-list to .gitignore 2017-03-06 21:05:44 +01:00
.gitmodules use same USB Product ID for DFU and runtime mode 2017-05-05 00:34:28 +02:00
README.md Add README.md 2018-05-11 15:48:54 +02:00
clk_calc.py clk calculation: updated max mul val 2015-02-20 14:40:07 +01:00
git-version-gen ensure git version ends up in firmware image 2016-03-19 21:37:55 +01:00

README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

This is under heavy development, and right now it is not surprising if things still break on a daily basis.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.

The goal is to support the following devices:

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware