the PPS procedure with baud rate change has not been tested.
by keeping the default ATR instead of applying the ATR sent by
the host software, no other baud rate choice is offered.
Change-Id: Ibf7c6b83d2cf68172c7aa25116d838e24a95d5fe
this change allows to initialize the TPDU state while in
ISO_S_WAIT_TPDU, before actually entering ISO_S_TPDU
Change-Id: I505d3add32a43de31499b800bc53442f99f65931
the reset/ATR handling has been heavily updated/fixed.
instead of using the timer counter peripheral to handle
the waiting time and corresponding timeout, the USART peripheral
internal timeout mechanism is used.
this is particularly important for the SIMtrace board since the
clock signal is not connected to the timer counter.
thus this change adds card emulation support for SIMtrace boards.
Fi and Di have been properly rename to F and D since the "i"
stands only for an "indicated" value, not the actual value.
this does not change the USB protocol (the variable have just been
renamed).
additional variables store more information about the card
capabilities
NOTE: it has only be tested for the SIMtrace board
Change-Id: Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5
this is the shortest and simplest ATR possible according to the
ISO 7816-3 spec.
it does not offer any non-default parameters (F, D, WI, ...)
Change-Id: I4ff41b5120bcadca652296f9d3691f7606be2bd2
this just adds the name of the TPDU state on top of the state number.
the ISO state is cleaned up accordingly
Change-Id: Id5104a2c3579dedb092c179748e9ed525673841c
There have been tons of format-string related bugs in our code which
we never discovered due to disabling -Wformat. Let's fix that.
Change-Id: I5ec466361bcc526fac1f4897673264ee5af3458b
this changes how ATR is handled.
the ATR is also printed when set (as important debug information).
the test is also updated to correspond to the new mechanism (
simulating the timeout before sending the ATR)
Change-Id: I69df797e2feadffa9f5f977cb71b69386cee7cd0
when building the cardem application GCC would output the following warning:
libcommon/source/card_emu.c: In function 'card_emu_process_rx_byte':
libcommon/source/card_emu.c:764:2: warning: enumeration value 'ISO_S_IN_ATR' not handled in switch [-Wswitch]
switch (ch->state) {
^~~~~~
in card emulation the reader should not send data while the card is
sending its ATR.
this is true for other states already handled (RESET, ...). in
these cases an error message is output.
this behaviour is now the default case as data from the reader is
only expected in 3 cases: ISO_S_WAIT_TPDU, ISO_S_IN_TPDU, and
ISO_S_IN_PTS.
Change-Id: Ifbc8dbe1c9f176343304f211c7e6068fb977961e
the curent local copies of libosmocore headers + source is a temporary
hack anyway. We should instead rely on a system-wide install of
libosmocore cross-compiled for arm-none-eabi. But leave that as a
second (later) step beyond this patch.
Change-Id: Ia63fd842d45a2b404233b4326050e7eda0604cf0
The current protocol was card-emulation specific. The new protocol is
generic/flexible enough to accommodate both tracing and card emulation,
as well as modem control and other future extensions.
We now generalize the USB communiction and abandon the 'req_ctx'
structure inherited from openpcd. Instead we use the libosmocore 'msgb'
structure to handle incoming and outgoing USB tranfers. We also use
linuxlist-based msgb-queues for each endpoint.
Kevin Redon
Harald Welte