This adds support for the new ngff_cardem board, a board that
basically combines a ngff breakout board with a built-in SIMtrace2.
Cardem works, but depending on the modem it might need a adjusted ATR to
ensure a lower baud rate is used by the modem, high rates might lead
to weird power cycling of the card after a few transfers.
Trace was also tested and appears to work as expected.
Change-Id: Ia96124fbe8a752c98e7fd4096d542a3b2b9bc255
this python script lists the SIMtrace 2 devices connected to USB
and will flash the latest version of the application (if necessary).
it requires pyusb and dfu-util.
it is intended for end users so they don't need to read the length
and error-prone instructions provided in the wiki.
TODO:
- support updating bootloader (once dfu-ram image exists)
- use python implementation of dfu-util to be python only
Change-Id: I3ebe0f54b6e3b7b45478603cc0a5b56e87b1f461