From e48d6f2321edb38c7e5427ad4d4acf6d633b4b93 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Fri, 11 May 2018 15:48:54 +0200 Subject: [PATCH] Add README.md --- README.md | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 README.md diff --git a/README.md b/README.md new file mode 100644 index 00000000..1f14317a --- /dev/null +++ b/README.md @@ -0,0 +1,39 @@ +SIMtrace v2.0 +============= + +This is the repository for the next-generation SIMtrace devices, +providing abilities to trace the communication between (U)SIM card and +phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more. + +This is under heavy development, and right now it is not surprising if +things still break on a daily basis. + +NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware +or its associated firmware. SIMtrace v1.x is based on a different CPU / +microcontroller architecture and uses a completely different software +stack and host software. + +Supported Hardware +------------------ + +At this point, the primary development target is still the OWHW + sysmoQMOD +device, but we expect to add support for a SAM3 based SIMtrace hardware +board soon. + +The goal is to support the following devices: + +* Osmocom SIMtrace 1.x with SAM3 controller +** this is open hardware and schematics / PCB design is published +* sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) +** this is a proprietary device, publicly available from sysmocom +* sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) +** this is not publicly available hardware, but still supported + +This Repository +--------------- + +This repository contains several directory + +* firmware - the firmware to run on the actual devices +* hardware - some information related to the hardware +* host - Programs to use on the USB host to interface with the hardware