This patch adds three devices to qemu:
intel-hda
Intel HD Audio Controller, the PCI device. Provides a HDA bus.
Emulates ICH6 at the moment. Adding a ICH9 PCIE
variant shouldn't be hard.
hda-duplex
HDA Codec. Attaches to the HDA bus. Supports 16bit stereo,
rates 16k -> 96k, playback, recording and volume control
(with CONFIG_MIXEMU=y).
hda-output
HDA Codec without recording support. Subset of the hda-duplex
codec. Use this if you don't want your guests access your mic.
Usage: add '-device intel-hda -device hda-duplex' to your command line.
Tested guests:
* Linux works.
* Win7 works.
* DOS (mpxplay) works.
* WinXP doesn't work.
[ v2 changes ]
* Fixed endianess, big endian hosts work now.
* Fixed some emulation bugs.
* Added immediate command emulation.
* Added vmstate support.
* Make it behave like all other sound card drivers:
- can be configured via '--audio-card-list=hda'
- can be added to a VM using '-soundhw hda'
* Code style fixups.
* Zapped guest-triggerable asserts.
* Handle partial reads/writes of audio data correctly.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
This moves library functions used by both QEMU and the QEMU tools,
such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c
In addition it introduces oslib-obj.y to the Makefile set to be
included by the various targets, instead of relying on these library
functions magically getting included via block-obj-y.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All files include qemu-options.h which pulls in qemu-options.def from
the root directory. Thus generating qemu-options.def from Makefile.objs
under the target directory is not effective.
Further, people expect .def file to get cleaned with make clean:
it does not have state so no reason to defer removing it
until distclean. Also add a rule to remove old files that might
be around.
This fixes the error: ‘QEMU_OPTION_spice’ undeclared
(first use in this function) error that some people reported
which is really down to an out of date .def file.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Port qemu-kvm's signalfd compat code.
commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5
Author: Anthony Liguori <aliguori@us.ibm.com>
Date: Wed May 7 11:55:47 2008 -0500
Use signalfd() in io-thread
This patch reworks the IO thread to use signalfd() instead of sigtimedwait()
This will eliminate the need to use SIGIO everywhere.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We would need this to make sure we handle the mapped
security model correctly for different xattr names.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Implement TI x3130 pcie downstream port switch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement TI x3130 pcie upstream port switch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implements pcie root port switch in intel X58 ioh
whose device id is 0x3420.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
define struct PCIEPort which represents common part
of pci express port.(root, upstream and downstream.)
add a helper function for pcie port which can be used commonly by
root/upstream/downstream port.
define struct PCIESlot which represents common part of
pcie slot.(root and downstream.) and helper functions for it.
helper functions for chassis, slot -> PCIESlot conversion.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With that patch applied you'll actually see the guests screen in the
spice client. This does *not* bring qxl and full spice support though.
This is basically the qxl vga mode made more generic, so it plays
together with any qemu-emulated gfx card. You can display stdvga or
cirrus via spice client. You can have both vnc and spice enabled and
clients connected at the same time.
Open keyboard channel. Now you can type into the spice client and the
keyboard events are sent to your guest. You'll need some other display
like vnc to actually see the guest responding to them though.
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
The blkverify block driver makes investigating image format data
corruption much easier. A raw image initialized with the same contents
as the test image (e.g. qcow2 file) must be provided. The raw image
mirrors read/write operations and is used to verify that data read from
the test image is correct.
See docs/blkverify.txt for more information.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a simple tracer which produces binary trace files. To
try out the simple backend:
$ ./configure --trace-backend=simple
$ make
After running QEMU you can pretty-print the trace:
$ ./simpletrace.py trace-events trace.log
The output of simpletrace.py looks like this:
qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0
qemu_free 0.768 ptr=0x24363f0
^ ^---- timestamp delta (us)
|____ trace event name
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Make trace record fields 64-bit
Explicitly use 64-bit fields in trace records so that timestamps and
magic numbers work for 32-bit host builds.
Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events. Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).
The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.
The trace-events file serves two purposes:
1. Adding trace events is easy. It is not necessary to understand the
details of a backend tracing system. The trace-events file is a
single location where trace events can be declared without code
duplication.
2. QEMU is not tightly coupled to one particular backend tracing system.
In order to support tracing across QEMU host platforms and to
anticipate new backend tracing systems that are currently maturing,
it is important to be flexible and not tied to one system.
This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Implement a threaded VNC server using the producer-consumer model.
The main thread will push encoding jobs (a list a rectangles to update)
in a queue, and the VNC worker thread will consume that queue and send
framebuffer updates to the output buffer.
The threaded VNC server can be enabled with ./configure --enable-vnc-thread.
If you don't want it, just use ./configure --disable-vnc-thread and a syncrhonous
queue of job will be used (which as exactly the same behavior as the old queue).
If you disable the VNC thread, all thread related code will not be built and there will
be no overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Profiling with callgrind seems to show that a lot of time is spent
in the palette code (mostly due to memory allocation and qdict to int
conversion).
This patch adds a VncPalette implementation. The palette is stored
in a hash table, like qdict, but which does way less memory allocations,
and doesn't suffer from the QObject overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For the same reason that we don't use vnc-authentication-sasl.c but
vnc-auth-sals.c. Because it's tooooo long.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move sdl, vnc, curses and cocoa UI into ui/ to cleanup
the root directory. Also remove some unnecessary explicit
targets from Makefile.
aliguori: fix build when srcdir != objdir
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move pci bridge related code into pci_bridge.c from pci.c
for further enhancement. pci.c is big enough now, so split it out.
No code change but exporting some accesser functions.
In fact, few pci bridge functions stays in pci.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sheepdog is a distributed storage system for QEMU. It provides highly
available block level storage volumes to VMs like Amazon EBS. This
patch adds a qemu block driver for Sheepdog.
Sheepdog features are:
- No node in the cluster is special (no metadata node, no control
node, etc)
- Linear scalability in performance and capacity
- No single point of failure
- Autonomous management (zero configuration)
- Useful volume management support such as snapshot and cloning
- Thin provisioning
- Autonomous load balancing
The more details are available at the project site:
http://www.osrg.net/sheepdog/
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds required infrastructure for the new security model.
- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.
In addition move SMB argument to os-posix.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introcuce os-posix.c and move posix specific signal handling
there.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This introduces os-win32.c. It is meant to carry win32 specific
functions thata are not relevant for all of QEMU as well as win32
versions of various pieces like signal handling etc.
Move win32 polling handler helper functions from vl.c to os-win32.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for tight encoding [1]. This patch only add support
for "basic" tight compression without any filter.
[1] http://tigervnc.org/cgi-bin/rfbproto#tight-encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new cursor type to console.h and a bunch of functions to
deal with cursors the (new) cursor.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow to implement new encodings (tight, zrle, ..)
in a cleaner way. This may hurt performances, because some
functions like vnc_convert_pixel are not static anymore, but
should not be a problem with gcc 4.5 and the new -flto.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're running into various problems because the "raw" file access, which
is used internally by the various image formats is entangled with the
"raw" image format, which maps the VM view 1:1 to a file system.
This patch renames the raw file backends to the file protocol which
is treated like other protocols (e.g. nbd and http) and adds a new
"raw" image format which is just a wrapper around calls to the underlying
protocol.
The patch is surprisingly simple, besides changing the probing logical
in block.c to only look for image formats when using bdrv_open and
renaming of the old raw protocols to file there's almost nothing in there.
For creating images, a new bdrv_create_file is introduced which guesses the
protocol to use. This allows using qemu-img create -f raw (or just using the
default) for both files and host devices. Converting the other format drivers
to use this function to create their images is left for later patches.
The only issues still open are in the handling of the host devices.
Firstly in current qemu we can specifiy the host* format names
on various command line acceping images, but the new code can't
do that without adding some translation. Second the layering breaks
the no_zero_init flag in the BlockDriver used by qemu-img. I'm not
happy how this is done per-driver instead of per-state so I'll
prepare a separate patch to clean this up.
There's some more cleanup opportunity after this patch, e.g. using
separate lists and registration functions for image formats vs
protocols and maybe even host drivers, but this can be done at a
later stage.
Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT
case that I don't quite understand, but which I fear won't work as
expected - possibly even before this patch.
Note that this patch requires various recent block patches from Kevin
and me, which should all be in his block queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori