Use kinfo_getvmmap(3) on FeeBSD >= 7.x and /compat/linux/proc on older
FreeBSD. (kinfo_getvmmap is preferred since /compat/linux/proc is
usually only mounted on hosts also using the Linuxolator.)
This patch is a bit hacky because the includes needed for kinfo_getvmmap
conflict with other definitions in exec.c by default so I had to `trick
around' a little, but I built the result in FreeBSD 6.4-stable and
7.2-stable tbs and on 8-stable on the host so the hacks at least
should be stable. (If this is a problem maybe we could also move the
kinfo_getvmmap invocations into a seperate source file but that would
be more work...)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move target specific functions and RAM handling to arch_init.c.
Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.
Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The dynamic linker converts the Linux layout to the AIX layout and is
reentrant so it won't do it a second time if it's already been
converted. In short it work just fine with either register layout.
OTOH, statically linked binaries expect a Linux layout.
Remove code converting the Linux layout to AIX layout so that all
binaries are presented the Linux Layout.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix a few typos in the help texts for the various aio commands.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 86feb1c860
did not change all occurrences of INDEX_op_qemu_ld32u
for tcg/arm.
Please note that I could not test this patch
(I have currently no arm system available).
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
CC net/tap-bsd.o
/src/qemu/net/tap-bsd.c: In function `tap_open':
/src/qemu/net/tap-bsd.c:93: warning: implicit declaration of function `error_report'
CC sparc-softmmu/../net/tap-win32.o
cc1: warnings being treated as errors
/src/qemu/target-sparc/../net/tap-win32.c: In function 'net_init_tap':
/src/qemu/target-sparc/../net/tap-win32.c:709: warning: implicit declaration of function 'error_report'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The location tracking interface is used by code shared with qemi-img,
qemu-nbd and qemu-io, so it needs to be available there. Commit
827b0813 provides it in a rather hamfisted way: it adds a dummy
implementation to qemu-tool.c.
It's cleaner to provide the real thing, and put a few more dummy
monitor functions into qemu-tool.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current default stack limit of 512kB is far too small; a fair
number of gcc testsuite failures (for all guests) are directly
attributable to this. Using the -s option in every invocation of
the emulator is annoying to say the least.
A reasonable compromise seems to be to honor the system rlimit.
At least on two Linux distributions, this is set to 8MB and 10MB
respectively. If the system does not limit the stack, then we're
no worse off than before.
At the same time, rename the variable from x86_stack_size and
change the ultimate fallback size from 512kB to 8MB.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Don't set PAGE_EXEC for XN pages, to avoid a bypass of XN protection
checking if the page is already in the TLB.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The period for Win32 timers is very short and always the same
independent of dynticks, so it's possible that the timer fires
before qemu_run_all_timers has reset alarm_timer->pending to zero.
Reset alarm_timer->pending before rearming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bdrv_open may return -errno so we have to check
if the return value is '< 0', not '== -1'.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
errx takes the exit status of a process as the first
argument. Passing errno to it is wrong. Instead the
patch lets errx take EXIT_FAILURE.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bdrv_open may return -errno so we have to check
if the return value is '< 0', not '== -1'.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Beginning with its introduction, the virtio balloon has had an overflow error
that causes 'info balloon' to misreport the actual memory size when the balloon
itself becomes larger than 4G. Use a cast when converting dev->actual from
pages to kB to prevent overflows.
Before:
(qemu) info balloon
balloon: actual=5120
(qemu) balloon 1025
(qemu) info balloon
balloon: actual=1025
(qemu) balloon 1024
(qemu) info balloon
balloon: actual=5120
After:
(qemu) info balloon
balloon: actual=5120
(qemu) balloon 1025
(qemu) info balloon
balloon: actual=1025
(qemu) balloon 1024
(qemu) info balloon
balloon: actual=1024
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When input some invalid word 'unknowcmd' through QMP port, qemu outputs
this error message:
"parse error: invalid keyword `%s'"
This patch makes qemu output the content of invalid keyword, like:
"parse error: invalid keyword `unknowcmd'"
Signed-off-by: Amos Kong <akong@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that we output an error message according to the returned error code in
qemu-img, let's return the real error codes. "Input/output error" for
everything isn't helpful.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Juergen Lock