Over time these must have gotten out of order. Put everything back in
alphabetical order.
This is purely a clean up. In practice nothing depends on the order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We're supposed to keep qerror definitions and table entries in
alphabetical order. In practice this is not checked.
I haven't found a nice way to integrate this into the makefile yet but
we can at least have this script which verifies that qerrors are in
alphabetical order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
New QMP command to change the VNC password.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to
deal with HMP right now like readline support. Export it from the monitor so
we can consume it in hmp.c.
In short time, hmp.c will take over all of the readline bits.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also drops the leftover 'mon' argument.
This is a preparation for the next commits which will port the
eject and change commands to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.
Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current comment says that the arm_timers are restricted to between
32 KHz and 1 MHz, but sp804 TRM does not specify those limits.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the L2 cache controller on the ARM devboards which have one,
since we have a dummy model of it now. Note that the only non-MP board
with an L2x0 is the PB1176, which we don't model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before this patch we would allow the (iso) buffer to grow unlimited
(and it would under certain circumstances) leading to way too high
latencies for iso data streams.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is something which should have been done from the first version of
usb-redir, but wasn't.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note the bufpq_target_size id stored in the endpoint info struct,
even though it only used once. This is done because it will be
referenced from other code in a follow up patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And ignore status messages from the client which arrive after stream
stop (the stream stop send to the client and an error status reported by
the client my cross each other due to network latency).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add USBEndpoint for the control endpoint to USBDevices. Link async
packets to the USBEndpoint instead of the USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Start maintaining endpoint state at USBDevice level. Add USBEndpoint
struct and some helper functions to deal with it. For now it contains
the endpoint type only. Moved over some bits from usb-linux.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The secondary CPU bootloader in arm_boot.c holds secondary CPUs in a
pen until the primary CPU releases them. Make boards specify the
address to be polled to determine whether to leave the pen (it was
previously hardcoded to 0x10000030, which is a Versatile Express/
Realview specific system register address).
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
u-boot uses single automatic scans and polling in
pxa2xx_keypad driver, so clear KPC_AS bit immediately
and update keys state even if KPC_AS and KPC_ASACT are
cleared.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Pallete entry size for 16bpp format is 2 bytes, not 4
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
User visible changes in seabios:
- Probe HPET existence (fix for -no-hpet)
- Probe PCI existence (fix for -machine isapc)
- usb: fix boot paths
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Obviously, linking the RTC device state to the PIIX does not belong into
the common path that is shared with the isapc.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Otherwise, the dirty log information is lost in the kernel forever.
Fixes opensuse-12.1 boot screen, which changes the vga windows rapidly.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix errors in the decode of M profile CPS:
* the decode of the I (affects PRIMASK) and F (affects FAULTMASK)
bits was reversed
* the FAULTMASK system register number is 19, not 17
This fixes an issue reported as LP:913925.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev is now equipped (thanks to the last commit) to disassociate
chardevs from the qdev devices on the devices going away. So doing it
in the virtio-console driver is not necessary.
Since that was the only thing being done in the qdev exit method, drop
it entirely.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a device is removed, remove the association with a chardev, if any,
so that the chardev can be re-used later for other devices.
Reported-by: Qunfang Zhang <qzhang@redhat.com>
Fix-suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
is_dup_page is already proceeding in 32-bit chunks. Changing it
to 16 bytes using Altivec or SSE is easy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU does have a "scsi" option (to be used like -device
virtio-blk-pci,drive=foo,scsi=off). However, it only
masks the feature bit, and does not reject the command
if a malicious guest disregards the feature bits and
issues a request.
Without this patch, using scsi=off does not protect you
from CVE-2011-4127.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When an rtc interrupt is reinjected immediately after being acked,
other interrupts should not be reinjected, so do clear their bits.
Also, if the periodic interrupts have been disabled before acking,
do not reinject, as the guest might get very confused!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi