Add some notes about Linux AIO explaining why we don't use AIO in
some situations.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This makes the sheepdog block driver support bdrv_co_readv/writev
instead of bdrv_aio_readv/writev.
With this patch, Sheepdog network I/O becomes fully asynchronous. The
block driver yields back when send/recv returns EAGAIN, and is resumed
when the sheepdog network connection is ready for the operation.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Embed qcow_aio_read_cb into qcow_co_readv and qcow_aio_write_cb into qcow_co_writev
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
remove unused field from this structure and put some of them in qcow_aio_read_cb and qcow_aio_write_cb
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Current behaviour if a read fails is for the acb to not get finished.
This causes an infinite loop in bdrv_read_em (block.c). The read failure
never gets reported to the guest and if the error condition clears, the
process never recovers.
With this patch, when curl reports a failure we finish the acb as a
failure. This results in the guest receiving an I/O error (rather than
the read hanging indefinitely) and if the error condition subsequently
clears, retries work as expected.
The simplest test is to put an ISO on a web server you have control over
and open it with qemu-io. Then move the ISO out of the way and attempt
to read some data - you should see behaviour matching the above.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit 52b8eb6013 added a mutex,
but never initialized it. This caused a segfault.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Documentation states the num is measured in clusters, but its
actually measured in sectors
Signed-off-by: Devin Nakamura <devin122@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By introducing BlockDriverState compiling qcow2 with DEBUG_ALLOC and DEBUG_EXT
defined got broken.
Define a BdrvCheckResult structure locally which is now needed as the second
argument.
Also fix qcow2_read_extensions() needing BDRVQcowState.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SetFilePointer returns INVALID_SET_FILE_POINTER when it fails.
In addition, GetLastError must be checked.
The first call of SetFilePointer did not use INVALID_SET_FILE_POINTER,
the second call used wrong error handling.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When loading an internal snapshot whose L1 table is smaller than the current L1
table, the size of the current L1 would be shrunk to the snapshot's L1 size in
memory, but not on disk. This lead to incorrect refcount updates and eventuelly
to image corruption.
Instead of writing the new L1 size to disk, this simply retains the bigger L1
size that is currently in use and makes sure that the unused part is zeroed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The purpose of AsyncContexts was to protect qcow and qcow2 against reentrancy
during an emulated bdrv_read/write (which includes a qemu_aio_wait() call and
can run AIO callbacks of different requests if it weren't for AsyncContexts).
Now both qcow and qcow2 are protected by CoMutexes and AsyncContexts can be
removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old qcow format is another user of the AsyncContext infrastructure.
Converting it to coroutines (and therefore CoMutexes) allows to remove
AsyncContexts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VHD files technically can be up to 2Tb, but virtual pc is limited
to 127G. Currently qemu-img refused to create vpc files > 127G,
but it is failing to return error when converting from a non-vpc
VHD file which is >127G. It returns success, but creates a truncated
converted image. Also, qemu-img info claims the vpc file is 127G
(and clean).
This patch detects a too-large vpc file and returns -EFBIG. Without
this patch,
=============================================================
root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/140g-dynamic.vhd
image: /mnt/140g-dynamic.vhd
file format: vpc
virtual size: 127G (136899993600 bytes)
disk size: 284K
root@ip-10-38-123-242:~/qemu-fixed# qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y
root@ip-10-38-123-242:~/qemu-fixed# echo $?
0
root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/y
image: /mnt/y
file format: raw
virtual size: 127G (136899993600 bytes)
disk size: 0
=============================================================
(The 140G image was truncated with no warning or error.)
With the patch, I get:
=============================================================
root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img info /mnt/140g-dynamic.vhd
qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large
root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y
qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large
qemu-img: Could not open '/mnt/140g-dynamic.vhd'
=============================================================
See https://bugs.launchpad.net/qemu/+bug/814222 for details.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callees always return 0, except for FreeBSD's cdrom_eject(), which
returns -ENOTSUP when the device is in a terminally wedged state.
The only caller is bdrv_eject(), and it maps -ENOTSUP to 0 since
commit 4be9762a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only caller is bdrv_set_locked(), and it ignores the value.
Callees always return 0, except for FreeBSD's cdrom_set_locked(),
which returns -ENOTSUP when the device is in a terminally wedged
state.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's been disabled since the start (commit 19cb3738, Aug 2006), and
has been untouched except for spelling fixes and such. I don't feel
like dragging it along any further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In snapshotting there is no guest involved, so we can safely use a writeback
mode and do the flushes in the right place (i.e. at the very end). This
improves the time that creating/restoring an internal snapshot takes with an
image in writethrough mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img.c wants to count allocated file size of image. Previously it
counts a single bs->file by 'stat' or Window API. As VMDK introduces
multiple file support, the operation becomes format specific with
platform specific meanwhile.
The functions are moved to block/raw-{posix,win32}.c and qemu-img.c calls
bdrv_get_allocated_file_size to count the bs. And also added VMDK code
to count his own extents.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Conform coding style in vmdk.c to pass scripts/checkpatch.pl checks.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add create option 'format', with enums:
monolithicSparse
monolithicFlat
twoGbMaxExtentSparse
twoGbMaxExtentFlat
Each creates a subformat image file. The default is monolithicSparse.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parse vmdk decriptor file and open mono flat image.
Read/write the flat extent.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The return type of get_cluster_offset was an offset that use 0 to denote
'not allocated', this will be no longer true for flat extents, as we see
flat extent file as a single huge cluster whose offset is 0 and length
is the whole file length.
So now we use int return value, 0 means success and otherwise offset
invalid.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cid_update is the flag for updating CID on first write after opening the
image. This should be per image open rather than per program life cycle,
so change it from static var of vmdk_write to a field in BDRVVmdkState.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Flush all the file that referenced by the image.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several occurrence of magic number 0x200 as the descriptor
offset within mono sparse image file. This is not the case for images
with separate descriptor file. So a field is added to BDRVVmdkState to
hold the correct value.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Separate vmdk_open by subformats to:
* vmdk_open_vmdk3
* vmdk_open_vmdk4
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Probe as the same behavior as VMware does.
Recognize image as monolithicFlat descriptor file when the file is text
and the first effective line (not '#' leaded comment or space line) is
either 'version=1' or 'version=2'. No space or upper case charactors
accepted.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In get_whole_cluster, the offset is not aligned to cluster when reading
from backing_hd. When the first write to child is not at the cluster
boundary, wrong address data from parent is copied to child.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This introduces qemu-img create option for sheepdog which allows the
data to be fully preallocated (note that sheepdog always preallocates
metadata).
The option is disabled by default and you need to enable it like the
following:
qemu-img create sheepdog:test -o preallocation=full 1G
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Linux x86_64 host with 32bit userspace, running
qemu or even just "qemu-img create -f qcow2 some.img 1G"
causes a kernel warning:
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img
ioctl 00005326 is CDROM_DRIVE_STATUS,
ioctl 801c0204 is FDGETPRM.
The warning appears because the Linux compat-ioctl handler for these
ioctls only applies to block devices, while qemu also uses the ioctls on
plain files. Work around by calling fstat() the ensure the ioctls are
only used on block devices.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_report() prepends location, and appends a newline. The message
constructed from the arguments should not contain a newline. Fix the
obvious offenders.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If qcow2_cache_put returns an error during cluster allocation and the
allocation fails, it must be removed from the list of in-flight allocations.
Otherwise we'd get a loop in the list when the ACB is used for the next
allocation.
Luckily, this qcow2_cache_put shouldn't fail anyway because the L2 table is
only read, so that qcow2_cache_put doesn't even involve I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
bdrv_aio_* must not call the callback before returning to its caller. In vdi,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* must not call the callback before returning to its caller. In qcow,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* must not call the callback before returning to its caller. In qcow2,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Variable 'snap' is assigned a value that is never used.
Remove snap and the related code.
Cc: Christian Brunner <chb@muc.de>
Cc: Josh Durgin <josh.durgin@dreamhost.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When not specifying a cluster size on the command line, qemu-img printed
a cluster size of 0:
Formatting '/tmp/test.qcow2', fmt=qcow2 size=67108864
encryption=off cluster_size=0
This patch adds the default cluster size to the QEMUOptionParameter list, so
that it displays the default value that is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes memory leaks that may be caused by I/O errors during L1 table growth
(can happen during save_vm) and in qemu-img check.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If scheduling fails, the number of outstanding I/Os must be correct,
or there will be a hang when waiting for everything to be flushed.
Reviewed-by: Christian Brunner <chb@muc.de>
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new format is rbd:pool/image[@snapshot][:option1=value1[:option2=value2...]]
Each option is used to configure rados, and may be any Ceph option, or "conf".
The "conf" option specifies a Ceph configuration file to read.
This allows rbd volumes from more than one Ceph cluster to be used by
specifying different monitor addresses, as well as having different
logging levels or locations for different volumes.
Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd stacks on top of librados to provide access
to rbd images.
Using librbd simplifies the qemu code, and allows
qemu to use new versions of the rbd format
with few (if any) changes.
Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
use the correct way to get the size of a disk device or partition
From: Adam Hamsik <haad@netbsd.org>
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On NetBSD a userland process is better with the character device
interface. In addition, a block device can't be opened twice; if a Xen
backend opens it, qemu can't and vice-versa.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vmdk code is sloppy when handling the header descriptor during
creation of an image. Fix all header accesses in the create path to
either store native endianness or convert it when appropriate.
Reported-by: Yury Tsarev <ytsarev@novell.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change BDRV_O_NOCACHE to only imply bypassing the host OS file cache,
but no writeback semantics. All existing callers are changed to also
specify BDRV_O_CACHE_WB to give them writeback semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The .bdrv_truncate() operation resizes images and growing is easy to
implement in QED. Simply check that the new size is valid and then
update the image_size header field to reflect the new size.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One strategy to limit the startup delay of consistency check when
opening image files is to ensure that the file is marked dirty for as
little time as possible.
QED currently marks the image dirty when the first allocating write
request is issued and clears the dirty bit again when the image is
cleanly closed. In practice that means the image is marked dirty for
most of a guest's lifetime and prone to being in a dirty state upon
crash or power failure.
It is safe to clear the dirty bit after all allocating write requests
have completed and a flush has been performed. This patch adds a timer
after the last allocating write request completes. When the timer fires
it will flush and then clear the dirty bit. The timer is set to 5
seconds and is cancelled upon arrival of a new allocating write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The qed_bytes_to_clusters() function is normally used with size_t
lengths. Consistency check used it with file size length and therefore
failed on 32-bit hosts when the image file is 4 GB or more.
Make qed_bytes_to_clusters() explicitly 64-bit and update consistency
check to keep 64-bit cluster counts.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use get_option_parameter() to instead of duplicating the loop, and
use BDRV_SECTOR_SIZE to instead of 512
Signed-off-by: Mitnick Lyu <mitnick.lyu@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero clusters are similar to unallocated clusters except instead of reading
their value from a backing file when one is available, the cluster is always
read as zero.
This implements read support only. At this stage, QED will never write a
zero cluster.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We also change the way the file parameter is parsed so IPv6 IP
addresses can be used, e.g.: "drive=nbd:[::1]:5000"
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu now has generic bitmap functions,
so don't redefine them in sheepdog.c,
use common header instead. A small cleanup.
Here's only one function which is actually
used in sheepdog and gets replaced with
a generic one (simplified):
- static inline int test_bit(int nr, const volatile unsigned long *addr)
+ static inline int test_bit(int nr, const unsigned long *addr)
{
- return ((1UL << (nr % BITS_PER_LONG))
& ((unsigned long*)addr)[nr / BITS_PER_LONG])) != 0;
+ return 1UL & (addr[nr / BITS_PER_LONG] >> (nr & (BITS_PER_LONG-1)));
}
The body is equivalent, but the argument is not: there's
"volatile" in there. Why it is used for - I'm not sure.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch is similar to 171e3d6b99
which fixed qcow2:
Returning -EIO is far from optimal, but at least it's an error code.
In addition to read/write failures, -EIO is also returned when
decompress_cluster failed.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is similar to 171e3d6b99
which fixed qcow2:
Returning -EIO is far from optimal, but at least it's an error code.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When copying L2 tables (this happens only with internal snapshots), the order
wasn't completely safe, so that after a crash you could end up with a L2 table
that has too low refcount, possibly leading to corruption in the long run.
This patch puts the operations in the right order: First allocate the new
L2 table and replace the reference, and only then decrease the refcount of the
old table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning -ENOTSUP, generate a more detailed error.
Unfortunately we don't have a helpful text for features that we don't know yet,
so just print the feature mask. It might be useful at least if someone asks for
help.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The qcow2 driver is now declared responsible for any QCOW image that has
version 2 or greater (before this, version 3 would be detected as raw).
For everything newer than version 2, an error is reported.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
When reading a compressed cluster failed, qcow2 falsely returned success.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Requests could return success even though they failed when bdrv_aio_readv
returned NULL for a backing file read.
Reported-by: Chunqiang Tang <ctang@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes the following bug in QCOW2. For a QCOW2 image that is larger
than its base image, when handling a read request straddling over the end of the
base image, the QCOW2 driver attempts to read beyond the end of the base image
and the request would fail.
This bug was found by Fast Virtual Disk (FVD)'s fully automated testing tool.
The following test triggered the bug.
dd if=/dev/zero of=/var/ramdisk/truth.raw count=0 bs=1 seek=1098561536
dd if=/dev/zero of=/var/ramdisk/zero-500M.raw count=0 bs=1 seek=593099264
./qemu-img create -f qcow2 -ocluster_size=65536,backing_fmt=blksim -b /var/ramdisk/zero-500M.raw /var/ramdisk/test.qcow2 1098561536
./qemu-io --auto --seed=30477694 --truth=/var/ramdisk/truth.raw --format=qcow2 --test=blksim:/var/ramdisk/test.qcow2 --verify_write=true --compare_before=false --compare_after=true --round=100000 --parallel=100 --io_size=10485760 --fail_prob=0 --cancel_prob=0 --instant_qemubh=true
Signed-off-by: Chunqiang Tang <ctang@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Error report from cppcheck:
block/vdi.c:122: error: Using sizeof for array given as function argument returns the size of pointer.
block/vdi.c:128: error: Using sizeof for array given as function argument returns the size of pointer.
Fix both by setting the correct size.
The buggy code is only used when QEMU is build without uuid support.
The bug is not critical, so there is no urgent need to apply it to
old versions of QEMU.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For cache=unsafe we also need to set BDRV_O_CACHE_WB, otherwise we have some
strange unsafe writethrough mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Variables l2_modified and l2_size are not really used, remove them.
Spotted by GCC 4.6.0:
CC block/qcow2-refcount.o
/src/qemu/block/qcow2-refcount.c: In function 'qcow2_update_snapshot_refcount':
/src/qemu/block/qcow2-refcount.c:708:37: error: variable 'l2_modified' set but not used [-Werror=unused-but-set-variable]
/src/qemu/block/qcow2-refcount.c:708:9: error: variable 'l2_size' set but not used [-Werror=unused-but-set-variable]
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The consistency check on open is necessary in order to fix inconsistent
table offsets left as a result of a crash mid-operation. Images with a
backing file actually flush before updating table offsets and are
therefore guaranteed to be consistent. Do not mark these images dirty.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a bdrv_discard function to qcow2 that frees the discarded clusters.
It does not yet pass the discard on to the underlying file system driver, but
the space can be reused by future writes to the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch parses the input filename in sd_create(), and enables us
specifying a target server to create sheepdog images.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move size after the two pointers in struct Qcow2Cache to get better
packing of struct elements on 64 bit architectures.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED relies on the underlying filesystem to extend the file and maintain
its size. Check that images are not created on a block device.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 calls bdrv_flush() after performing COW in order to ensure that the
L2 table change is never written before the copy is safe on disk. Now that the
L2 table is cached, we can wait with flushing until we write out the next L2
table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some new cache functions to qcow2 which can be used for caching
refcount blocks and L2 tables. When used with cache=writethrough they work
like the old caching code which is spread all over qcow2, so for this case we
have merely a cleanup.
The interesting case is with writeback caching (this includes cache=none) where
data isn't written to disk immediately but only kept in cache initially. This
leads to some form of metadata write batching which avoids the current "write
to refcount block, flush, write to L2 table" pattern for each single request
when a lot of cluster allocations happen. Instead, cache entries are only
written out if its required to maintain the right order. In the pure cluster
allocation case this means that all metadata updates for requests are done in
memory initially and on sync, first the refcount blocks are written to disk,
then fsync, then L2 tables.
This improves performance of scenarios with lots of cluster allocations
noticably (e.g. installation or after taking a snapshot).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
cpu_to_be64w() is called with an obviously non-aligned pointer. Use
cpu_to_be64wu() instead. It fixes unaligned accesses errors on IA64
hosts.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix a file descriptor leak, reported by cppcheck:
[/src/qemu/block/vvfat.c:759]: (error) Resource leak: dir
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In addition this adds missing braces to the function to be consistent
with the coding style.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It doesn't really make sense for functions in qcow2.c to be named
qcow_ so convert the names to match correctly.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for the qemu-img check command. It also
introduces a dirty bit in the qed header to mark modified images as
needing a check. This bit is cleared when the image file is closed
cleanly.
If an image file is opened and it has the dirty bit set, a consistency
check will run and try to fix corrupted table offsets. These
corruptions may occur if there is power loss while an allocating write
is performed. Once the image is fixed it opens as normal again.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch implements the read/write state machine. Operations are
fully asynchronous and multiple operations may be active at any time.
Allocating writes lock tables to ensure metadata updates do not
interfere with each other. If two allocating writes need to update the
same L2 table they will run sequentially. If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables. The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).
With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces the qed on-disk layout and implements image
creation. Later patches add read/write and other functionality.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support to discard blocks in a raw image residing on an XFS filesystem
by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes. Support for other
hole punching mechanisms can be added when they become available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new bdrv_discard method to free blocks in a mapping image, and a new
drive property to set the granularity for these discard. If no discard
granularity support is set discard support is disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RBD is an block driver for the distributed file system Ceph
(http://ceph.newdream.net/). This driver uses librados (which is part
of the Ceph server) for direct access to the Ceph object store and is
running entirely in userspace (Yehuda also wrote a driver for the
linux kernel, that can be used to access rbd volumes as a block
device).
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Christian Brunner <chb@muc.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All drivers use bs->file instead of s->hd for quite a while now, so it's time
to remove s->hd.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When building on a 64 bit host which uses 'long' for int64_t,
GCC emits a warning:
CC block/blkverify.o
/src/qemu/block/blkverify.c: In function `blkverify_verify_readv':
/src/qemu/block/blkverify.c:304: warning: long long int format, long
unsigned int arg (arg 3)
Rework a77cffe7e9 to avoid the warning.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The cache content may be destroyed after a failed read, better not use it any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This changes bdrv_flush to return 0 on success and -errno in case of failure.
It's a requirement for implementing proper error handle in users of bdrv_flush.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adding the gcc format attribute detects a format bug
which is fixed here.
v2:
Don't use type cast. BDRV_SECTOR_SIZE is unsigned long long,
so %lld should be the correct format specifier.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage.
The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img.
Right now, it only supports to copy the full snapshot, delta snapshot is on the way.
Changes from V1: all the comments from Kevin are addressed:
Add read-only checking
Fix coding style
Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp
Signed-off-by: Disheng Su <edison@cloud.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of doing lots of magic for setting up initial refcount blocks and stuff
create a minimal (inconsistent) image, open it and initialize the rest with
regular qcow2 functions.
This is a complete rewrite of the image creation function. The old
implementating is #ifdef'd out and will be removed by the next patch (removing
it here would have made the diff unreadable because diff tries to find
similarities when it's really a rewrite)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The L1 table grow operation includes a size calculation that bumps up
the new L1 table size in order to anticipate the size needs of vmstate
data. This helps reduce the number of times that the L1 table has to be
grown when vmstate data is appended.
This size overhead is not necessary during image creation,
bdrv_truncate(), or snapshot goto operations. In fact, existing
qemu-iotests that exercise table growth are no longer able to trigger it
because image creation preallocates an L1 table that is too large after
changes to qcow_create2().
This patch keeps the size calculation but also adds exact growth for
callers that do not want to inflate the L1 table size unnecessarily.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compiling with GCC 4.6.0 20100925 produced a warning:
/src/qemu/block/qcow2-refcount.c: In function 'update_refcount':
/src/qemu/block/qcow2-refcount.c:552:13: error: variable 'dummy' set but not used [-Werror=unused-but-set-variable]
Fix by adding a dummy cast so that the result is not unused.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix this compiler warning:
./block/vvfat.c:2285: error: comparison of unsigned expression >= 0 is always true
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The blkverify block driver makes investigating image format data
corruption much easier. A raw image initialized with the same contents
as the test image (e.g. qcow2 file) must be provided. The raw image
mirrors read/write operations and is used to verify that data read from
the test image is correct.
See docs/blkverify.txt for more information.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 used to use bounce buffers for any AIO requests. This does not only imply
unnecessary copying, but also unbounded allocations which should be avoided.
This patch removes bounce buffers from the normal AIO write path. Encrypted
images continue to use a bounce buffer, however with constant size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 used to use bounce buffers for any AIO requests. This does not only imply
unnecessary copying, but also unbounded allocations which should be avoided.
This patch removes bounce buffers from the normal AIO read path, and constrains
them to a constant size for encrypted images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We always have a sync for the refcount update when a new cluster is
allocated. If we move this past the COW, we can save an additional sync.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note that the flush is omitted intentionally in qcow2_free_clusters. If
anything, we can leak clusters here if we lose the writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block/nbd.c: use default port number when none is specified
qemu-nbd.c: use IANA-assigned port number: 10809
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the hardcoded handling of 512 byte alignment with bs->buffer_alignment
to handle larger sector size devices correctly.
Note that we can not rely on it to be initialize in bdrv_open, so deal
with the worst case there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow file used for write support in vvfat is a temporary file,
so we can use cache=unsafe there. Without this, write support is just
too slow to be of any use.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Allocation and deallocation of bs->opaque is not in the control of a
block driver. Therefore it should not set bs->opaque to a data structure
used by another bs, or closing the image will lead to a double free.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
vvfat tries to set the readonly flag in its open function, but nowadays
this is overwritted with the readonly=... command line option. Check in
bdrv_write if the vvfat was opened read-only and return an error in this
case.
Without this check, vvfat tries to access the qcow bs, which is NULL
without enabled write support.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
The signedness of enum types depend on the compiler implementation.
Therefore the check for negative values may or may not be meaningful.
Fix by explicitly casting to a signed integer.
Since the values are also checked earlier against event_names
table, this is an internal error. Change the 'if' to 'assert'.
This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 79368c81bf.
Conflicts:
block.c
I haven't been able to come up with a solution yet for the corruption caused by
unaligned requests from the IDE disk so revert until a solution can be written.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a new cluster was allocated, we only need a flush after the write to the
L2 table if it was a COW and we need to decrease the refcounts of the old
clusters.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow symbolic links which point to /dev/sgX devices.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Linux, we have code to detect CD-ROMs using an ioctl. We shouldn't lose
anything but false positives by removing the check for a /dev/cd* path.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch allows to connect Qemu using NBD protocol to an nbd-server
using named exports.
For instance, if on the host "isoserver", in /etc/nbd-server/config, you have:
[generic]
[debian-500-ppc-netinst]
exportname = /ISO/debian-500-powerpc-netinst.iso
[Fedora-10-ppc-netinst]
exportname = /ISO/Fedora-10-ppc-netinst.iso
You can connect to it, using:
qemu -cdrom nbd:isoserver:exportname=debian-500-ppc-netinst
qemu -cdrom nbd:isoserver:exportname=Fedora-10-ppc-netinst
NOTE: you need at least nbd-server 2.9.18
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"qemu_socket.h" includes all necessary files and
including <netinet/tcp.h> without <netinet/in.h>
could cause errors on some systems.
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf