sim-card
/
qemu
Archived
10
0
Fork 0

more precise timer emulation - fixed NE2000 probe problems - added VLTMPDIR support

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@286 c046a42c-6fe2-441c-8c8c-71466251a162
This commit is contained in:
bellard 2003-06-27 12:01:39 +00:00
parent a6f816d697
commit 87858c89ca
1 changed files with 143 additions and 29 deletions

172
vl.c
View File

@ -745,17 +745,19 @@ void pic_init(void)
#define RW_STATE_LATCHED_WORD1 5
typedef struct PITChannelState {
uint16_t count;
int count; /* can be 65536 */
uint16_t latched_count;
uint8_t rw_state;
uint8_t mode;
uint8_t bcd; /* not supported */
uint8_t gate; /* timer start */
int64_t count_load_time;
int64_t count_last_edge_check_time;
} PITChannelState;
PITChannelState pit_channels[3];
int speaker_data_on;
int pit_min_timer_count = 0;
int64_t ticks_per_sec;
@ -785,13 +787,36 @@ void cpu_calibrate_ticks(void)
ticks_per_sec = (ticks * 1000000LL + (usec >> 1)) / usec;
}
/* compute with 96 bit intermediate result: (a*b)/c */
static uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)
{
union {
uint64_t ll;
struct {
#ifdef WORDS_BIGENDIAN
uint32_t high, low;
#else
uint32_t low, high;
#endif
} l;
} u, res;
uint64_t rl, rh;
u.ll = a;
rl = (uint64_t)u.l.low * (uint64_t)b;
rh = (uint64_t)u.l.high * (uint64_t)b;
rh += (rl >> 32);
res.l.high = rh / c;
res.l.low = (((rh % c) << 32) + (rl & 0xffffffff)) / c;
return res.ll;
}
static int pit_get_count(PITChannelState *s)
{
int64_t d;
uint64_t d;
int counter;
d = ((cpu_get_ticks() - s->count_load_time) * PIT_FREQ) /
ticks_per_sec;
d = muldiv64(cpu_get_ticks() - s->count_load_time, PIT_FREQ, ticks_per_sec);
switch(s->mode) {
case 0:
case 1:
@ -809,11 +834,10 @@ static int pit_get_count(PITChannelState *s)
/* get pit output bit */
static int pit_get_out(PITChannelState *s)
{
int64_t d;
uint64_t d;
int out;
d = ((cpu_get_ticks() - s->count_load_time) * PIT_FREQ) /
ticks_per_sec;
d = muldiv64(cpu_get_ticks() - s->count_load_time, PIT_FREQ, ticks_per_sec);
switch(s->mode) {
default:
case 0:
@ -839,11 +863,74 @@ static int pit_get_out(PITChannelState *s)
return out;
}
/* get the number of 0 to 1 transitions we had since we call this
function */
/* XXX: maybe better to use ticks precision to avoid getting edges
twice if checks are done at very small intervals */
static int pit_get_out_edges(PITChannelState *s)
{
uint64_t d1, d2;
int64_t ticks;
int ret, v;
ticks = cpu_get_ticks();
d1 = muldiv64(s->count_last_edge_check_time - s->count_load_time,
PIT_FREQ, ticks_per_sec);
d2 = muldiv64(ticks - s->count_load_time,
PIT_FREQ, ticks_per_sec);
s->count_last_edge_check_time = ticks;
switch(s->mode) {
default:
case 0:
if (d1 < s->count && d2 >= s->count)
ret = 1;
else
ret = 0;
break;
case 1:
ret = 0;
break;
case 2:
d1 /= s->count;
d2 /= s->count;
ret = d2 - d1;
break;
case 3:
v = s->count - (s->count >> 1);
d1 = (d1 + v) / s->count;
d2 = (d2 + v) / s->count;
ret = d2 - d1;
break;
case 4:
case 5:
if (d1 < s->count && d2 >= s->count)
ret = 1;
else
ret = 0;
break;
}
return ret;
}
static inline void pit_load_count(PITChannelState *s, int val)
{
if (val == 0)
val = 0x10000;
s->count_load_time = cpu_get_ticks();
s->count_last_edge_check_time = s->count_load_time;
s->count = val;
if (s == &pit_channels[0] && val <= pit_min_timer_count) {
fprintf(stderr,
"\nWARNING: vl: on your system, accurate timer emulation is impossible if its frequency is more than %d Hz. If using a 2.5.xx Linux kernel, you must patch asm/param.h to change HZ from 1000 to 100.\n\n",
PIT_FREQ / pit_min_timer_count);
}
}
void pit_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
{
int channel, access;
PITChannelState *s;
addr &= 3;
if (addr == 3) {
channel = val >> 6;
@ -857,27 +944,24 @@ void pit_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
s->rw_state = RW_STATE_LATCHED_WORD0;
break;
default:
s->mode = (val >> 1) & 7;
s->bcd = val & 1;
s->rw_state = access - 1 + RW_STATE_LSB;
break;
}
s->mode = (val >> 1) & 7;
s->bcd = val & 1;
} else {
s = &pit_channels[addr];
switch(s->rw_state) {
case RW_STATE_LSB:
s->count_load_time = cpu_get_ticks();
s->count = val;
pit_load_count(s, val);
break;
case RW_STATE_MSB:
s->count_load_time = cpu_get_ticks();
s->count = (val << 8);
pit_load_count(s, val << 8);
break;
case RW_STATE_WORD0:
case RW_STATE_WORD1:
if (s->rw_state & 1) {
s->count_load_time = cpu_get_ticks();
s->count = (s->latched_count & 0xff) | (val << 8);
pit_load_count(s, (s->latched_count & 0xff) | (val << 8));
} else {
s->latched_count = val;
}
@ -935,16 +1019,23 @@ uint32_t speaker_ioport_read(CPUX86State *env, uint32_t addr)
void pit_init(void)
{
pit_channels[0].gate = 1;
pit_channels[1].gate = 1;
pit_channels[2].gate = 0;
PITChannelState *s;
int i;
cpu_calibrate_ticks();
for(i = 0;i < 3; i++) {
s = &pit_channels[i];
s->mode = 3;
s->gate = (i != 2);
pit_load_count(s, 0);
}
register_ioport_writeb(0x40, 4, pit_ioport_write);
register_ioport_readb(0x40, 3, pit_ioport_read);
register_ioport_readb(0x61, 1, speaker_ioport_read);
register_ioport_writeb(0x61, 1, speaker_ioport_write);
cpu_calibrate_ticks();
}
/***********************************************************/
@ -1462,6 +1553,8 @@ void ne2000_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
s->rcnt == 0) {
s->isr |= ENISR_RDC;
ne2000_update_irq(s);
/* XXX: find a better solution for irqs */
cpu_x86_interrupt(global_env);
}
if (val & E8390_TRANS) {
net_send_packet(s, s->mem + (s->tpsr << 8), s->tcnt);
@ -1671,13 +1764,23 @@ static void host_segv_handler(int host_signum, siginfo_t *info,
}
static int timer_irq_pending;
static int timer_irq_count;
static void host_alarm_handler(int host_signum, siginfo_t *info,
void *puc)
{
/* just exit from the cpu to have a chance to handle timers */
cpu_x86_interrupt(global_env);
timer_irq_pending = 1;
/* NOTE: since usually the OS asks a 100 Hz clock, there can be
some drift between cpu_get_ticks() and the interrupt time. So
we queue some interrupts to avoid missing some */
timer_irq_count += pit_get_out_edges(&pit_channels[0]);
if (timer_irq_count) {
if (timer_irq_count > 2)
timer_irq_count = 2;
timer_irq_count--;
/* just exit from the cpu to have a chance to handle timers */
cpu_x86_interrupt(global_env);
timer_irq_pending = 1;
}
}
void help(void)
@ -1705,7 +1808,8 @@ int main(int argc, char **argv)
struct sigaction act;
struct itimerval itv;
CPUX86State *env;
const char *tmpdir;
/* we never want that malloc() uses mmap() */
mallopt(M_MMAP_THRESHOLD, 4096 * 1024);
@ -1749,14 +1853,19 @@ int main(int argc, char **argv)
net_init();
/* init the memory */
strcpy(phys_ram_file, "/tmp/vlXXXXXX");
tmpdir = getenv("VLTMPDIR");
if (!tmpdir)
tmpdir = "/tmp";
snprintf(phys_ram_file, sizeof(phys_ram_file), "%s/vlXXXXXX", tmpdir);
if (mkstemp(phys_ram_file) < 0) {
fprintf(stderr, "Could not create temporary memory file\n");
fprintf(stderr, "Could not create temporary memory file '%s'\n",
phys_ram_file);
exit(1);
}
phys_ram_fd = open(phys_ram_file, O_CREAT | O_TRUNC | O_RDWR, 0600);
if (phys_ram_fd < 0) {
fprintf(stderr, "Could not open temporary memory file\n");
fprintf(stderr, "Could not open temporary memory file '%s'\n",
phys_ram_file);
exit(1);
}
ftruncate(phys_ram_fd, phys_ram_size);
@ -1856,10 +1965,15 @@ int main(int argc, char **argv)
env->eflags = 0x2;
itv.it_interval.tv_sec = 0;
itv.it_interval.tv_usec = 10 * 1000;
itv.it_interval.tv_usec = 1000;
itv.it_value.tv_sec = 0;
itv.it_value.tv_usec = 10 * 1000;
setitimer(ITIMER_REAL, &itv, NULL);
/* we probe the tick duration of the kernel to inform the user if
the emulated kernel requested a too high timer frequency */
getitimer(ITIMER_REAL, &itv);
pit_min_timer_count = ((uint64_t)itv.it_interval.tv_usec * PIT_FREQ) /
1000000;
for(;;) {
struct pollfd ufds[2], *pf, *serial_ufd, *net_ufd;