sim-card
/
qemu
Archived
10
0
Fork 0
Code Releases Activity

Add virtio-blk support 

Virtio-blk is a paravirtual block device based on VirtIO.  It can be used by
specifying the if=virtio parameter to the -drive parameter.

When using -enable-kvm, it can achieve very good performance compared to IDE or
SCSI.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5870 c046a42c-6fe2-441c-8c8c-71466251a162
This commit is contained in:
aliguori 2008-12-04 19:52:44 +00:00
parent 967f97fa00
commit 6e02c38dad
7 changed files with 346 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Makefile.target
View File

@ -665,7 +665,7 @@ OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
OBJS+= cirrus_vga.o apic.o parallel.o acpi.o piix_pci.o
OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o
# virtio support
OBJS+= virtio.o
OBJS+= virtio.o virtio-blk.o
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
endif
ifeq ($(TARGET_BASE_ARCH), ppc)
@ -684,7 +684,7 @@ OBJS+= unin_pci.o ppc_chrp.o
# PowerPC 4xx boards
OBJS+= pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
# virtio support
OBJS+= virtio.o
OBJS+= virtio.o virtio-blk.o
endif
ifeq ($(TARGET_BASE_ARCH), mips)
OBJS+= mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o

13
hw/pc.c
View File

@ -33,6 +33,7 @@
#include "boards.h"
#include "console.h"
#include "fw_cfg.h"
#include "virtio-blk.h"
/* output Bochs bios info messages */
//#define DEBUG_BIOS
@ -1092,6 +1093,18 @@ static void pc_init1(ram_addr_t ram_size, int vga_ram_size,
}
}
}
/* Add virtio block devices */
if (pci_enabled) {
int index;
int unit_id = 0;
while ((index = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
virtio_blk_init(pci_bus, 0x1AF4, 0x1001,
drives_table[index].bdrv);
unit_id++;
}
}
}
static void pc_init_pci(ram_addr_t ram_size, int vga_ram_size,

248
hw/virtio-blk.c Normal file
View File

@ -0,0 +1,248 @@
/*
* Virtio Block Device
*
* Copyright IBM, Corp. 2007
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include "virtio-blk.h"
#include "block_int.h"
typedef struct VirtIOBlock
{
VirtIODevice vdev;
BlockDriverState *bs;
VirtQueue *vq;
} VirtIOBlock;
static VirtIOBlock *to_virtio_blk(VirtIODevice *vdev)
{
return (VirtIOBlock *)vdev;
}
typedef struct VirtIOBlockReq
{
VirtIOBlock *dev;
VirtQueueElement elem;
struct virtio_blk_inhdr *in;
struct virtio_blk_outhdr *out;
size_t size;
uint8_t *buffer;
} VirtIOBlockReq;
static void virtio_blk_rw_complete(void *opaque, int ret)
{
VirtIOBlockReq *req = opaque;
VirtIOBlock *s = req->dev;
/* Copy read data to the guest */
if (!ret && !(req->out->type & VIRTIO_BLK_T_OUT)) {
size_t offset = 0;
int i;
for (i = 0; i < req->elem.in_num - 1; i++) {
size_t len;
/* Be pretty defensive wrt malicious guests */
len = MIN(req->elem.in_sg[i].iov_len,
req->size - offset);
memcpy(req->elem.in_sg[i].iov_base,
req->buffer + offset,
len);
offset += len;
}
}
req->in->status = ret ? VIRTIO_BLK_S_IOERR : VIRTIO_BLK_S_OK;
virtqueue_push(s->vq, &req->elem, req->size + sizeof(*req->in));
virtio_notify(&s->vdev, s->vq);
qemu_free(req->buffer);
qemu_free(req);
}
static VirtIOBlockReq *virtio_blk_get_request(VirtIOBlock *s)
{
VirtIOBlockReq *req;
req = qemu_mallocz(sizeof(*req));
if (req == NULL)
return NULL;
req->dev = s;
if (!virtqueue_pop(s->vq, &req->elem)) {
qemu_free(req);
return NULL;
}
return req;
}
static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBlock *s = to_virtio_blk(vdev);
VirtIOBlockReq *req;
while ((req = virtio_blk_get_request(s))) {
int i;
if (req->elem.out_num < 1 || req->elem.in_num < 1) {
fprintf(stderr, "virtio-blk missing headers\n");
exit(1);
}
if (req->elem.out_sg[0].iov_len < sizeof(*req->out) ||
req->elem.in_sg[req->elem.in_num - 1].iov_len < sizeof(*req->in)) {
fprintf(stderr, "virtio-blk header not in correct element\n");
exit(1);
}
req->out = (void *)req->elem.out_sg[0].iov_base;
req->in = (void *)req->elem.in_sg[req->elem.in_num - 1].iov_base;
if (req->out->type & VIRTIO_BLK_T_SCSI_CMD) {
unsigned int len = sizeof(*req->in);
req->in->status = VIRTIO_BLK_S_UNSUPP;
virtqueue_push(vq, &req->elem, len);
virtio_notify(vdev, vq);
qemu_free(req);
} else if (req->out->type & VIRTIO_BLK_T_OUT) {
size_t offset;
for (i = 1; i < req->elem.out_num; i++)
req->size += req->elem.out_sg[i].iov_len;
req->buffer = qemu_memalign(512, req->size);
if (req->buffer == NULL) {
qemu_free(req);
break;
}
/* We copy the data from the SG list to avoid splitting up the request. This helps
performance a lot until we can pass full sg lists as AIO operations */
offset = 0;
for (i = 1; i < req->elem.out_num; i++) {
size_t len;
len = MIN(req->elem.out_sg[i].iov_len,
req->size - offset);
memcpy(req->buffer + offset,
req->elem.out_sg[i].iov_base,
len);
offset += len;
}
bdrv_aio_write(s->bs, req->out->sector,
req->buffer,
req->size / 512,
virtio_blk_rw_complete,
req);
} else {
for (i = 0; i < req->elem.in_num - 1; i++)
req->size += req->elem.in_sg[i].iov_len;
req->buffer = qemu_memalign(512, req->size);
if (req->buffer == NULL) {
qemu_free(req);
break;
}
bdrv_aio_read(s->bs, req->out->sector,
req->buffer,
req->size / 512,
virtio_blk_rw_complete,
req);
}
}
/*
* FIXME: Want to check for completions before returning to guest mode,
* so cached reads and writes are reported as quickly as possible. But
* that should be done in the generic block layer.
*/
}
static void virtio_blk_reset(VirtIODevice *vdev)
{
/*
* This should cancel pending requests, but can't do nicely until there
* are per-device request lists.
*/
qemu_aio_flush();
}
static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
{
VirtIOBlock *s = to_virtio_blk(vdev);
struct virtio_blk_config blkcfg;
uint64_t capacity;
int cylinders, heads, secs;
bdrv_get_geometry(s->bs, &capacity);
bdrv_get_geometry_hint(s->bs, &cylinders, &heads, &secs);
stq_raw(&blkcfg.capacity, capacity);
stl_raw(&blkcfg.seg_max, 128 - 2);
stw_raw(&blkcfg.cylinders, cylinders);
blkcfg.heads = heads;
blkcfg.sectors = secs;
memcpy(config, &blkcfg, sizeof(blkcfg));
}
static uint32_t virtio_blk_get_features(VirtIODevice *vdev)
{
return (1 << VIRTIO_BLK_F_SEG_MAX | 1 << VIRTIO_BLK_F_GEOMETRY);
}
static void virtio_blk_save(QEMUFile *f, void *opaque)
{
VirtIOBlock *s = opaque;
virtio_save(&s->vdev, f);
}
static int virtio_blk_load(QEMUFile *f, void *opaque, int version_id)
{
VirtIOBlock *s = opaque;
if (version_id != 1)
return -EINVAL;
virtio_load(&s->vdev, f);
return 0;
}
void *virtio_blk_init(PCIBus *bus, uint16_t vendor, uint16_t device,
BlockDriverState *bs)
{
VirtIOBlock *s;
int cylinders, heads, secs;
static int virtio_blk_id;
s = (VirtIOBlock *)virtio_init_pci(bus, "virtio-blk", vendor, device,
0, VIRTIO_ID_BLOCK,
0x01, 0x80, 0x00,
sizeof(struct virtio_blk_config), sizeof(VirtIOBlock));
if (!s)
return NULL;
s->vdev.get_config = virtio_blk_update_config;
s->vdev.get_features = virtio_blk_get_features;
s->vdev.reset = virtio_blk_reset;
s->bs = bs;
bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
bdrv_set_geometry_hint(s->bs, cylinders, heads, secs);
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
register_savevm("virtio-blk", virtio_blk_id++, 1,
virtio_blk_save, virtio_blk_load, s);
return s;
}

76
hw/virtio-blk.h Normal file
View File

@ -0,0 +1,76 @@
/*
* Virtio Block Device
*
* Copyright IBM, Corp. 2007
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#ifndef _QEMU_VIRTIO_BLK_H
#define _QEMU_VIRTIO_BLK_H
#include "virtio.h"
#include "block.h"
#include "pci.h"
/* from Linux's linux/virtio_blk.h */
/* The ID for virtio_block */
#define VIRTIO_ID_BLOCK 2
/* Feature bits */
#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */
#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
#define VIRTIO_BLK_F_GEOMETRY 4 /* Indicates support of legacy geometry */
struct virtio_blk_config
{
uint64_t capacity;
uint32_t size_max;
uint32_t seg_max;
uint16_t cylinders;
uint8_t heads;
uint8_t sectors;
} __attribute__((packed));
/* These two define direction. */
#define VIRTIO_BLK_T_IN 0
#define VIRTIO_BLK_T_OUT 1
/* This bit says it's a scsi command, not an actual read or write. */
#define VIRTIO_BLK_T_SCSI_CMD 2
/* Barrier before this op. */
#define VIRTIO_BLK_T_BARRIER 0x80000000
/* This is the first element of the read scatter-gather list. */
struct virtio_blk_outhdr
{
/* VIRTIO_BLK_T* */
uint32_t type;
/* io priority. */
uint32_t ioprio;
/* Sector (ie. 512 byte offset) */
uint64_t sector;
};
#define VIRTIO_BLK_S_OK 0
#define VIRTIO_BLK_S_IOERR 1
#define VIRTIO_BLK_S_UNSUPP 2
/* This is the first element of the write scatter-gather list */
struct virtio_blk_inhdr
{
unsigned char status;
};
void *virtio_blk_init(PCIBus *bus, uint16_t vendor, uint16_t device,
BlockDriverState *bs);
#endif

2
qemu-doc.texi
View File

@ -253,7 +253,7 @@ this drive. If the filename contains comma, you must double it
(for instance, "file=my,,file" to use file "my,file").
@item if=@var{interface}
This option defines on which type on interface the drive is connected.
Available types are: ide, scsi, sd, mtd, floppy, pflash.
Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio.
@item bus=@var{bus},unit=@var{unit}
These options define where is connected the drive by defining the bus number and
the unit id.

2
sysemu.h
View File

@ -123,7 +123,7 @@ extern unsigned int nb_prom_envs;
#endif
typedef enum {
IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD
IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO
} BlockInterfaceType;
typedef struct DriveInfo {

6
vl.c
View File

@ -2267,7 +2267,10 @@ static int drive_init(struct drive_opt *arg, int snapshot,
} else if (!strcmp(buf, "sd")) {
type = IF_SD;
max_devs = 0;
} else {
} else if (!strcmp(buf, "virtio")) {
type = IF_VIRTIO;
max_devs = 0;
} else {
fprintf(stderr, "qemu: '%s' unsupported bus type '%s'\n", str, buf);
return -1;
}
@ -2474,6 +2477,7 @@ static int drive_init(struct drive_opt *arg, int snapshot,
break;
case IF_PFLASH:
case IF_MTD:
case IF_VIRTIO:
break;
}
if (!file[0])