Let's make sure we don't even bother to ask the card to verify
anything as ADM1 pin which is not either a sequence of decimal digits
or an even number of hex digits (even number of bytes).
Change-Id: I4a193a3cf63462fad73d145ab1481070ddf767ca
Let's add a proper argparser instance for the 'verify_adm' command,
avoiding situations where the user types 'verif_adm --help' and then
--help is interpreted as the PIN value, removing one more attempt from
the failed ADM1 counter.
Let's use that opportunity to improve the documentation of the command.
Change-Id: I3321fae66a11efd00c53b66c7890fce84796e658
pySim-shell output has changed over time, so some examples were
showing outdated content. Let's update those.
Change-Id: I4058719c32b61689522e90eba37253e8accb8ba5
The method build_select_path_to chops off the first element of the
current path. This is done to prevent re-selection of the first file in
the current path.
Unfortunately chopping off the first element in the current path does
not work properly in a situation when the current path points to the MF.
This would chop off the first and last element in the list and the for
loop below would run 0 times.
To fix this, let's keep the first element and chop it off from the
resulting path.
Related: OS#5418
Change-Id: Ia521a7ac4c25fd3a2bc8edffdc45ec89ba4b16eb
When we initialize the reader, we currently tell only which type of
interface we are using, but we do not print the reader number or the
device path.
Let's extend the messages so that the path is printed. To prevent
problems with integration-tests, let's also add an environment variable
that we can use to detect when pySim runs inside a integration-test.
Related: OS#6210
Change-Id: Ibe296d51885b1ef5f9c9ecaf1d28da52014dcc4b
this is far from being complete, just some basic first commands
to get the certificates and eIM configuration.
Change-Id: Ie05108e635ed9c6de10f0ba431cb1b13893f6be8
This just adds basic support for the ISD-R application and its
associated STORE DATA command which is used for the ES10x interfaces
between off-card entities and the on-card ISD-R.
Change-Id: Ieab37b083e25d3f36c20f6e9ed3e4bdfdd14a42a
Closes: OS#5637
The argument parser is set up globally for all LinkBase objects in
__init__.py. Since we tend to have only platform independed code in
__init__.py, we should move the argument parser setup into the
specific LinkBase classes.
Related: OS#6210
Change-Id: I22c32aa81ca0588e3314c3ff4546f6e5092c11df
In in the module __init__.py we print an init message (which type of
LinkBase class is providing the SimLink). However in __init__.py we tend
to have only platform independed code but the message string can already
be categorized as platform depened. Let's put the init message into the
constructor of the concrete classes of LinkBase.
Related: OS#6210
Change-Id: I0a6dd7deb79a5f3e42b29094a1cf2535075fa430
We used to support only single-byte tags in bertlv_encode_tag,
let's fix that. The easy option is to simply call bertlv_parse_tag,
as that already supported multi-byte tags.
Change-Id: If0bd9137883c4c8b01c4dfcbb53cabeee5c1ce2b
Now that pySim-shell can switch between logical channels, let's state
the currently used logical channel in the prompt.
Change-Id: I45781a6fba205eeb4ac7f58d5cb642b7131bdd88
Related: OS#6230
We've already had the 'open_channel' and 'close_channel' commands,
which were sent to (and acknowledged by) the card. However,
those commands didn't affect the pySim-shell state, i.e. all
communication would still happen through the default channel '0'.
With this patch we introduce a 'switch_channel' command, using which
the user can determine which of the (previously opened) logical channels
shall be used by pySim-shell.
Change-Id: Ia76eb45c4925882ae6866e50b64d9610bd4d546d
Closes: OS#6230
Now that pySim-shell is aware of logical channels and issues almost
all of its APDUs on the currently selected channel, we must also make
sure that ADF selection by AID (implemented by the CardBase class)
issues the SELECT on the respective logical channel.
Before this patch, SELECT ADF by AID would always be issued on the
primary logical channel (0), irrespective of the currently active
RuntimeLchan.
Change-Id: Idf05c297e6a2e24ca539408b8912e348c0782bb4
Related: OS#6230
This new approach will "fork" separate SimCardCommands instances
for each RuntimeLchan. Higher-layer code should now always use the
RuntimeLchan.scc rather than the RuntimeState.card._scc in order to
make sure commands use the correct logical channel.
Change-Id: I13e2e871f2afc2460d9fd1cd566de42267c7d389
Related: OS#6230
Historically we always only had one instance of SimCardCommands, but
with this patch we can now have multiple instances, one for each lchan.
The SimCardCommands class is aware of the logical channel it runs on
and will patch the CLA byte accordingly.
Change-Id: Ibe5650dedc0f7681acf82018a86f83377ba81d30
Related: OS#6230
This fixes the below error during build of the documentation:
pysim/docs/shell.rst:349: ERROR: "<class 'pySim-shell.PySimCommands'>" has no attribute "apdu_cmd_parser"
Change-Id: If89b66a45ea18b5a3fc56bf77b05e679463da5a8
We already have the open channel and close_channel commands in
pySim-shell. They are sent to the card and acknowledged, respectively.
We also already do have code that can track multiple different logical
channels (the rs.lchan array). However, this is currently only used by
pySim-trace, and not by pySim-shell. Let's change that.
Change-Id: Idacee2dc57e8afe85c79bc85b259064e7f5b83a2
Related: OS#6230
An eUICC that has no active eSIM profile does not have an ICCID. (The
reason for this is that EF.ICCID is part of the eSIM profile).
Unfortunately pySim-shell insists on reading the ICCID from EF.ICCID on
startup in order to use it as a lookup key for verify_adm later.
To solve the problem, let's add a try/except block around the section
where EF.ICCID is read. In case of failure we set the ICCID to None,
Related: OS#5636
Change-Id: I8d18c5073946c5a6bb1f93be0ce692a599f46f8c
While our base classes (TransparentEF / LinFixedEF) always have the
dsecription as 4th argument after "fid, sfid, name", most of the derived
file-specific classes do not share that same argument order.
As seen in the bug fixed by previous Change-Id I7f32c9fd01094620b68b0e54536ecc6cdbe67903
this can have serious consequences. Let's avoid using unnamed
(positional) arguments for the description text altogether.
Change-Id: Icfb3fd1bae038c54fa14a91aa9f75219d839968c
We were using positional arguments when instantiating instances
of classes like EF_5GS3GPPLOCI with non-default names/fids/...
However, we got the argument order wrong and were passing the
description string in the position of the file size, which causes
exceptions like the following from pySim-trace:
Traceback (most recent call last):
File "/home/laforge/projects/git/pysim/./pySim-trace.py", line 198, in <module>
tracer.main()
File "/home/laforge/projects/git/pysim/./pySim-trace.py", line 125, in main
inst.process(self.rs)
File "/home/laforge/projects/git/pysim/pySim/apdu/__init__.py", line 259, in process
self.processed = method(self.lchan)
File "/home/laforge/projects/git/pysim/pySim/apdu/ts_102_221.py", line 152, in process_on_lchan
if self.cmd_dict['offset'] != 0 or self.lr < self.file.size[0]:
TypeError: '<' not supported between instances of 'int' and 'str'
Let's use named initializers for any arguments after the usual "fid, sfid, name"
initial arguments.
Change-Id: I7f32c9fd01094620b68b0e54536ecc6cdbe67903
We currently catch any exceptions that may occur when the card reader is
initialized. Then we print the exception string or the exception type
when no string is available. However, a failure during the reader
initialization is usually a severe problem, so a traceback would provde
a lot of helpful information to debug the issue. So lets not catch any
exceptions at this level so that we get the full backtrace.
Related: OS#6210
Change-Id: I4c4807576fe63cf71a7d33b243a3f8fea0b7ff23
When an exception occurs while initializing or handling the card we
print a traceback, but we do not print any info that allows us to
identify the device that was involved when the exception occurred. Let's
include the device path or number in the error message before we print
the traceback.
In order to make it easier to print the device information, let's add a
__str__() method to all of our devices. This method shall return the
device number or path.
Related: OS#6210
Change-Id: I200463e692245da40ea6d5b609bfc0ca02d15bdb
When the try block in which we also call init_card() fails, there may be
no card object, so we must not pass the card object to PysimApp in the
except block. This is also no problem, PysimApp will run without the
card object until the user executes do_equip for a second attempt.
Related: OS#6210
Change-Id: I28195f442ce007f05f7610c882bbc4a6520a8ce6
When __main__ runs different variables get assigned. In particular opts,
scc, sl and ch. Those variables are available in any scope and
technically it is possible to access them. However, lets not do this
since it leads to confusion. Also, pylint will complain about those code
locations.
In pySim-shell.py
- Let's use the proper locations (sl and ch are stored in PysimApp.
- Scc can be assigned in init_card.
- In method walk, the use of the variable opts to call ection_df is wrong,
lets use **kwargs (see also usage of action_ef).
- The constructor of Cmd2ApduTracer has a parameter cmd2_app, but usese
the global variable app. Let's use cmd2_app instead.
In pySim-prog.py
- Do not use opts.num in find_row_in_csv_file, use num instead.
- Pass scc to process_card as parameter so that it won't access scc
in the global scope.
Change-Id: I7f09e9a6a6bfc658de75e86f7383ce73726f6666
Related: OS#6210
In some cases, the specs do not specify an absolute record length.
Instead there may be only a minimum record length specified. The card
vendor may then chose to use larger record length at will. This usually
is no problem since the data is usually written from the left and the
remaining bytes are padded at the end (right side) of the data. However
in some rare cases (EF.MSISDN, see also 3GPP TS 51.011, section 10.5.5)
the data must be written right-aligned towards the physical record
length. This means that the data is padded from the left in this case.
To fix this: Let's add a "leftpad" flag to LinFixedEF, which we set to
true in those corner cases. The code that updates the record in
commands.py must then check this flag and padd the data accordingly.
Change-Id: I241d9fd656f9064a3ebb4e8e01a52b6b030f9923
Related: OS#5714
The methods verify_binary and verify_record are only used internally
in class SimCardCommands, they can be both private methods. Also lets
move them above the method that uses them.
Related: OS#5714
Change-Id: I57c9af3d6ff45caa4378c400643b4ae1fa42ecac
The commandline option -a, which does an ADM verification on startup,
does no longer work since the verify_adm method is no longer available
in the card base classes (cards.py). Let's use the verify_chv method
from SimCardCommands instead.
Related: RT#68294
Change-Id: Ic1e54d0e9e722d64b3fbeb044134044d47946f7c
In the last line of the if,elif,else branch, when we print the ApiError
object, we pass the variable sw to str() instead passing it to
ApiError() like we do it in the lines above. This is not correct and
causes strange exceptions.
Related: OS#67094
Change-Id: I5a1d19abeb00c2c9dc26517abc44a5c916f2d658
The REST megthd info uses deprecated methods to read the ICCID and the
IMSI from the card. However, we can replace those methods by selecting
the files we are interested in manually and then reading them.
Related: RT#67094
Change-Id: Ib0178823abb18187404249cfed71cfb3123d1d74
The class UsimCard is deprecated and only still used in very old
legacy applications. let's use the more modern UiccCardBase class
instead.
Related: RT#67094
Change-Id: I3676f033833665751c0d953176eafe175b20c14a
When the function connect_to_card is done, it selects ADF.USIM. This
might be contraproductive in case someone needs to access files on MF
level in one of the REST methods. Instead fo ADF.USIM, let's use MF as a
common ground to start from.
At the moment the only existing REST (info, auth) immediately select
ADF.USIM after calling connect_to_card already, so there are no further
modifications necessary.
Related: RT#67094
Change-Id: I16e7f3c991c83f81989ecc4e4764bb6cc799c01d
The method read_iccid in class CardBase should be put back to
legacy/cards.py. The reason for this is that it falls in the same
category like read_imsi, read_ki, etc. We should not use those old
methods in future programs since we have a more modern infrastructure
(lchan) now.
Also pySim-shell.py is the only caller of this method now. It is not
used in any other place.
Related: RT#67094
Change-Id: Ied3ae6fd107992abcc1b5ea3edb0eb4bdcd2f892
This dependency is currently only mentioned in requirements.txt, it
makes sense to also document it here.
Change-Id: I89760dd4008829c91fafbd442483d076c92a7ed4
The package providing the serial python module seems to be called
pyserial, which also matches what's written in requirements.txt.
Change-Id: I71ef6a19a487101e552219f10f2fa6215b966abd
When the command equip (do_equip) is executed, it accesses
self.rs.profile to see if there are any commands that need to be
unregistered before moving on with the card initialization.
However, it may be the case that no runtime state exists at this point.
This is in particular the case when the card is completely empty and
hence no profile is picked and no runtime state exists.
Change-Id: I0a8be66a69b630f1f2898b62dc752a8eb5275301
At the moment we only verify that no exceptions occurred but the output
is not yet verfied.
Related: OS#6094
Change-Id: I3aaa779b5bd8f30936c284a80dbdcb2b0e06985c
Harald Welte
Philipp Maier
Florian Klink