These functions are replaced by a more generic function hexstr_to_Nbytearr().
And, all occurances of redundant functions are replaced by generic functions
so its safe to remove them.
Change-Id: I7848451b90b35dca29d29f630cdc5405b5e9c19b
This method helps in encoding of Service Tables in EF.SST, EF.UST, EF.EST, EF.IST.
Takes original hex string of EF.SST, EF.UST, EF.EST, EF.IST, Service number,
Service to be enabled or disable flag as input and outputs the modified Service Table.
Change-Id: I0c97317d5a17aa0df720659d021b5cbf7d30edcc
Example:
./pySim-prog.py -p 0 -x 001 -y 01 -s 8988211900000000004 -i 001011234567895 \
-k 8baf473f2f8fd09487cccbd7097c6862 --op 11111111111111111111111111111111 \
-o 8E27B6AF0E692E750F32667A3B14605D -a 85524953 -n isim.test \
--msisdn 0598765432100 --epdgid epdg.epc.mnc001.mcc001.pub.3gppnetwork.org
Note:
1. For Operator Identifier based ePDG FQDN must be in the format
epdg.epc.mnc<MNC>.mcc<MCC>.pub.3gppnetwork.org
2. For Tracking/Location Area Identity based ePDG FQDN must be in format
lac<LAC>.epdg.epc.mnc<MNC>.mcc<MCC>.pub.3gppnetwork.org
and
tac-lb<TAC-low-byte>.tac-hb<TAC-high-byte>.tac.epdg.epc.mnc<MNC>.mcc<MCC>.pub.3gppnetwork.org
and
3. For 5GS Tracking Area Identity based ePDG FQDN using a 3 octet TAC
tac-lb<TAC-low-byte>.tac-mb<TAC-middle-byte>.tac-hb<TAC-high-byte>.5gstac. epdg.epc.mnc<MNC>.mcc<MCC>.pub.3gppnetwork.org
Change-Id: Ia00bfea36c50b6a38a5387d2f8147f25c81b1de4
Basically, the idea is to read all the AIDs on the UICC once
rather than reading each time we want to select an ADF.
The function select_adf_by_aid select the ADF by its AID which
is already populated by read_aids() function
Change-Id: I5e0e87e9cf238922d60fda7a7836e65f91f2c233
The card in the automatic test setup had been replaced, change the ADM
pin and the ICCID so that it matches the new card. Also the new card
does not feature an MSISDN file and the formatting of the EHPLMN file
changed in the output of pySim-Read.py
Change-Id: I413f4b8267e01727c59ad135881b3a2ed723ff5f
If the EF.EHPLMN exists, it contains the "Equivalent Home PLMN List".
The odd part of that list is that it is not just a list of additional
PLMN identities, but if the first digits of the IMSI are *not* listed
in EF.EHPLMN, then the MCC/MNC of the IMSI prefix is suddently no
longer considered the home network, but the subscriber is roaming.
See TS 23.122: "If the HPLMN code derived from the IMSI is not present
in the EHPLMN list, then it shall be treated as a Visited PLMN for PLMN
selection purposes."
Change-Id: I22d96ab4a424ec5bc1fb02f5e80165c646a748d3
This method encodes ePDG Id so it can be stored to EF.ePDGId or EF.ePDGIdEm.
See 3GPP TS 31.102 version 13.4.0 Release 13, section 4.2.102 and 4.2.104.
Resulting hex string is made of tag value + length + address type + address.
tag value for home ePDG identifier is 80
address type: 0x00 (FQDN), 0x01 (IPv4), 0x02 (IPv6), other (Reserved)
ePDG FQDN example: epdg.mnc001.mcc001.3gppnetwork.org
Note: Only FQDN format is supported for now
Change-Id: I864bda5505e9061391a727add294a6e90c50f9ef
As per TS 31.102, version 13.4.0 Release 13, this EF can found under ADF.USIM at File Id 6ff3.
Also, if service n°106 and service n°107 are available, this file shall be present.
Change-Id: I68114d328d1af5682a5bc1fa7642882e80b5de4d
The LOCI, PSLOCI and EPSLOCI contain some info,
including the PLMN, added helper functions to
decode it
Change-Id: Ibb513ff7d1dc6d33b354ae26cbd9c390ea3c8efc
the EF files in the USIM ADF are different to the ones int the GSM dir
so added the dictionary to avoid conflicts and hardcoded values
the 'DIR' one was added in ts_51_011.py, not sure if it should be there
as it's not in that standard, but did it for simplicity
Change-Id: I458380bf46b2986662ecdede2551c22cd9be92ba
According to 3GPP TS 27.007, sections 8.17 and 8.18, the modem
may *optionally* provide Generic and/or Restricted SIM Access
to the TE (Terminal Equipment) by means of the AT commands.
This basically means that a modem can act as a card reader.
Generic SIM Access allows the TE to send raw PDUs in the format
as described in 3GPP TS 51.011 directly to the SIM card, while
Restricted SIM Access is more limited, and thus is not really
interesting to us.
This change implements a new transport called ModemATCommandLink,
so using it a SIM card can be read and/or programmed without the
need to remove it from the modem's socket. A downside of this
approach is relatively slow I/O speed compared to PC/SC readers.
Tested with Quectel EC20:
$ ./pySim-read.py --modem-dev /dev/ttyUSB2
Change-Id: I20bc00315e2c7c298f46283852865c1416047bc6
Signed-off-by: Vadim Yanitskiy <axilirator@gmail.com>
By definition, h2s() is supposed to skip padding in the given
hexstring, so it was working fine for 'ff', but not for 'FF'.
Change-Id: I2c5d72a0f7f2796115116737f9f7b5299021f6a3
Signed-off-by: Vadim Yanitskiy <axilirator@gmail.com>
Some of the cards do not implement the erase method that each card
should have. However, having an empty method in each of those classes
does not make too much sense. Lets rather have an erase method in the
superclass (Card) that prints a warning to inform the user that erasing
the spcified card is not supported.
Change-Id: If5add960ec0cab58a01d8f83e6af8cb86ec70a8d
Resetting the contents of a file before re-writing it with parameters
might be helpful when implementing the currently empty erase() methods
of the various card implementations. Lets add two methods, one for
resetting a binary file and one for resetting a specific record in a
record oriented file
Change-Id: I3c3a4ef3d3f358404af307a68a20b7059f1a9e8d
In case try to decode the contents of an uninitalized EF.IMSI, the
function dec_imsi() would crash because it truncates all 0xFF from the
swapped version of the EF.IMSI contents and then accesses the first
element of the buffer. This always works for EF.IMSI contents that
contain valid IMSI data, but if all bytes are set to 0xFF, then no data
is left in the buffer after truncating, so lets check if we even have
bytes left before we move on with the decoding.
Change-Id: I93874a1d7e0b87d39e4b06a5c504643cfabb451c
When writing to files we often just write without making sure that the
actual file contents actually written. Lets add features to do a
read-after-write verification when writing to files.
Change-Id: I7be842004102f4998af376790c97647c107be3d5
For record oriented files we have the methods record_size() and
record_count() to determine the dimensions of a record oriented file,
however, we miss a similar function for regular binary files. Lets add a
method binary_size() to quickly determine the size of a non record
oriented file
Change-Id: I0593f2de7f34d5654a19e949dc567a236e44e20c
The lower part of gen_parameters() in pySim-prog.py contains some code
that checks whether the ADM pin supplied in its hexadecimal or in its
string form and generates a sanitised pin_adm from that. Lets separate
this part as it may become useful elsewhere too.
Change-Id: Ifead29724cc13a91de9e2e89314d7fb23c063d50
The contents of EF.AD me be uninitalized (all bytes set to 0xff). If
this is the case reset all bytes of the file to 0x00 and continue the
update of EF.AD with this value.
Change-Id: I57cf53e0c540469f11b6d85bd3daf3f9e14c237e
A MNC of 02 and 002 are *not* equal. The former is a two-digit MNC
and the latter is a three-digit MNC. Hence, we shouldn't treat
MNCs as integer values as we have no clue how many leading zeroes
(if any) the user entered.
Change-Id: I9d1d07a64888c76703c3e430bbdd822080c05819
Closes: OS#4523
pySim-prog and pySim-read currently echo back the pcsc reader id (or
baudrate/socket, depending on the interface used). This makes the output
unecessarly undeterministic, which becomes a problem when verifying the
putput in tests. Lets not echo those variable, user supplied parameters
back. Also lets move the code that does the initalization to utils, so
that it can be used from pySim-prog and from pySim-read (code dup).
Change-Id: I243cc332f075d007b1c111292effcc610e874eb3
Related: OS#4503
The method update_ad() caluclates the size of the data it had just
read from EF.AD, but the result is never used, lets remove that
line
Change-Id: Id38c0dc725ab6874de3ea60132482a09372abe9e
The hex string consists of contains zero or more ePDG identifier data objects.
Each ePDG Identifier TLV data object consists of tag value of '80', length, address type, identifier.
TS 31.102 version 13.4.0 Release 13. The same parsing method applies for both EF.ePDGId and EF.ePDGIdEm
Change-Id: I96fb129d178cfd7ec037989526da77899ae8d344
The functions are imported from the git commit 2a81963790e27eb6b188359af169c45afb6d3aaf from master branch
Change-Id: I5c7fdbd122e696d272f7480785d0c17ad2af138c
As per TS 31.103, This EF indicates which ISIM services are available.
If a service is not indicated as available in the ISIM, the ME shall not select this service.
Parsing of IST is achieved by first selecting the ISIM application using its AID.
This is followed by selecting EF.IST with File ID - 6f07 in ADF.ISIM
Change-Id: I3f0a7227360b72a707dc1bcc4cc9c8a4ec7ad2b2
This commit introduces a lookup table which maps ISIM Service Number to its description.
The mapping is defined in 3GPP TS 31.103 version 14.2.0 Release 14, 4.2.7 EF.IST (ISIM Service Table)
Change-Id: Iad51d0804259df47729308b461062f794b135e66
As per TS.31.102, This EF indicates which USIM services are available.
If a service is not indicated as available in the USIM, the ME shall not select this service.
Parsing of UST is achieved by first selecting the USIM application using its AID.
This is followed by selecting EF.UST with File ID - 6f38 in ADF.USIM
Change-Id: I54dbbd40bd3d22cee81f7c32e58cd946f8564257
This method helps in printing Service Tables in EF.SST, EF.UST, EF.IST.
Takes hex string of Service table, parses it and prints available service along with its description.
Change-Id: Ie1e82e07ead2e28314a5794661e6b2ced0acd72a
Initially the Card is read assuming a UICC SIM, but in case its not, an
error 6e00 will be thrown indicating CLA not supported and Card has just Classic SIM application.
Ref: https://web.archive.org/web/20090630004017/http://cheef.ru/docs/HowTo/APDU.info
The above link provides the bytes to use for CLA, P1, P2 in APDU
Change-Id: Ifea328eff3a381d7b82118e22d2bc0ec5f8a87e4
If AID of the desired ADF is in the list of AIDs of the Card/Card subclass object
then ADF is selected or else None is returned
Change-Id: Ie5f29eec14f099add1d0978e3e7d4ed3c9130854
herlesupreeth
Vadim Yanitskiy
Philipp Maier
Harald Welte