We already have the open channel and close_channel commands in
pySim-shell. They are sent to the card and acknowledged, respectively.
We also already do have code that can track multiple different logical
channels (the rs.lchan array). However, this is currently only used by
pySim-trace, and not by pySim-shell. Let's change that.
Change-Id: Idacee2dc57e8afe85c79bc85b259064e7f5b83a2
Related: OS#6230
An eUICC that has no active eSIM profile does not have an ICCID. (The
reason for this is that EF.ICCID is part of the eSIM profile).
Unfortunately pySim-shell insists on reading the ICCID from EF.ICCID on
startup in order to use it as a lookup key for verify_adm later.
To solve the problem, let's add a try/except block around the section
where EF.ICCID is read. In case of failure we set the ICCID to None,
Related: OS#5636
Change-Id: I8d18c5073946c5a6bb1f93be0ce692a599f46f8c
We currently catch any exceptions that may occur when the card reader is
initialized. Then we print the exception string or the exception type
when no string is available. However, a failure during the reader
initialization is usually a severe problem, so a traceback would provde
a lot of helpful information to debug the issue. So lets not catch any
exceptions at this level so that we get the full backtrace.
Related: OS#6210
Change-Id: I4c4807576fe63cf71a7d33b243a3f8fea0b7ff23
When an exception occurs while initializing or handling the card we
print a traceback, but we do not print any info that allows us to
identify the device that was involved when the exception occurred. Let's
include the device path or number in the error message before we print
the traceback.
In order to make it easier to print the device information, let's add a
__str__() method to all of our devices. This method shall return the
device number or path.
Related: OS#6210
Change-Id: I200463e692245da40ea6d5b609bfc0ca02d15bdb
When the try block in which we also call init_card() fails, there may be
no card object, so we must not pass the card object to PysimApp in the
except block. This is also no problem, PysimApp will run without the
card object until the user executes do_equip for a second attempt.
Related: OS#6210
Change-Id: I28195f442ce007f05f7610c882bbc4a6520a8ce6
When __main__ runs different variables get assigned. In particular opts,
scc, sl and ch. Those variables are available in any scope and
technically it is possible to access them. However, lets not do this
since it leads to confusion. Also, pylint will complain about those code
locations.
In pySim-shell.py
- Let's use the proper locations (sl and ch are stored in PysimApp.
- Scc can be assigned in init_card.
- In method walk, the use of the variable opts to call ection_df is wrong,
lets use **kwargs (see also usage of action_ef).
- The constructor of Cmd2ApduTracer has a parameter cmd2_app, but usese
the global variable app. Let's use cmd2_app instead.
In pySim-prog.py
- Do not use opts.num in find_row_in_csv_file, use num instead.
- Pass scc to process_card as parameter so that it won't access scc
in the global scope.
Change-Id: I7f09e9a6a6bfc658de75e86f7383ce73726f6666
Related: OS#6210
The commandline option -a, which does an ADM verification on startup,
does no longer work since the verify_adm method is no longer available
in the card base classes (cards.py). Let's use the verify_chv method
from SimCardCommands instead.
Related: RT#68294
Change-Id: Ic1e54d0e9e722d64b3fbeb044134044d47946f7c
The method read_iccid in class CardBase should be put back to
legacy/cards.py. The reason for this is that it falls in the same
category like read_imsi, read_ki, etc. We should not use those old
methods in future programs since we have a more modern infrastructure
(lchan) now.
Also pySim-shell.py is the only caller of this method now. It is not
used in any other place.
Related: RT#67094
Change-Id: Ied3ae6fd107992abcc1b5ea3edb0eb4bdcd2f892
When the command equip (do_equip) is executed, it accesses
self.rs.profile to see if there are any commands that need to be
unregistered before moving on with the card initialization.
However, it may be the case that no runtime state exists at this point.
This is in particular the case when the card is completely empty and
hence no profile is picked and no runtime state exists.
Change-Id: I0a8be66a69b630f1f2898b62dc752a8eb5275301
The comman verify_adm does no longer work since the verify_adm method is
no longer available in the card base classes (cards.py). Let's use the
verify_chv method from SimCardCommands instead.
Change-Id: Ic87e1bff221b10d33d36da32b589e2737f6ca9cd
This adds a new operation mode for pySim-shell, where a single command
can be passed to pySim-shell, which then is executed before pySim-shell
terminates.
Example: ./pySim-shell.py -p0 export --json
Change-Id: I0ed379b23a4b1126006fd8f9e7ba2ba07fb01ada
Closes: OS#6088
Rather than having to know and explicitly list every CardApplication,
let's iterate over the __subclasses__ of the CardApplication base class.
Change-Id: Ia6918e49d73d80acfaf09506e604d4929d37f1b6
We have a strict "one CardProfile per card" rule. For a modern UICC
without legacy SIM support, that works great, as all applications
have AID and ADF and can hence be enumerated/detected that way.
However, in reality there are mostly UICC that have legacy SIM, GSM-R
or even CDMA support, all of which are not proper UICC applications
for historical reasons.
So instead of having hard-coded hacks in various places, let's introduce
the new concept of a CardProfileAddon. Every profile can have any
number of those. When building up the RuntimeState, we iterate over the
CardProfile addons, and probe which of those are actually on the card.
For those discovered, we add their files to the filesystem hierarchy.
Change-Id: I5866590b6d48f85eb889c9b1b8ab27936d2378b9
There are some functions / classes which are only needed by the legacy
tools pySim-{read,prog}, bypassing our modern per-file transcoder
classes. Let's move this code to the pySim/legacy sub-directory,
rendering pySim.legacy.* module names.
The long-term goal is to get rid of those and have all code use the
modern pySim/filesystem classes for reading/decoding/encoding/writing
any kind of data on cards.
Change-Id: Ia8cf831929730c48f90679a83d69049475cc5077
This avoids error messages about re-registering 'AddlShellCommands' commandsets during 'equip()' in the bulk_script command.
Change-Id: I893bb5ae95f5c6e4c2be2d133754e427bc92a33d
So far, if no known programmable card (like sysmoISIM) has been found,
we were using the SimCard base class. However, once we detect an UICC,
we should have switched to the UsimCard class, as otherwise the various
methods called by USIM/ISIM specific commands don't exist and we get
weird 'SimCard' object has no attribute 'update_ust' execptions.
The entire auto-detection and the legacy SimCard / UsimCard classes
are showing the legacy of the code base and should probably be
re-architected. However, let's fix the apparent bug for now.
Change-Id: I5a863198084250458693f060ca10b268a58550a1
Closes: OS#6055
In cmd2, the upstream authors decided to rename a method in 2.0.0
without providing a backwards compatibility wrapper. Let's add that
locally.
Change-Id: Iaa17b93db13ba330551799cce5f0388c78217224
Closes: OS#6071
The API of the lchan object has changed. It no longer features the reset
method used by the pySim-shell reset command. Let's fix this by using
the reset method of the card object.
Change-Id: I55511d1edb97e8fa014724598ec173dd47fe25c1
This is important to produce the right command syntax when generating
command line reference in the user manual. However, we shouldn't add
this kludge to the individual programs, but only to the documentation
using the :prog: syntax.
Change-Id: I2ec7ab00c63d5d386f187e54755c71ffc2dce429
The SUSPEND UICC command is a TS 102 221 (UICC) command, so move
it to the UICC Card Profile.
Also, make sure that any shell command sets specified in the
CardProfile are actually installed during equip().
Change-Id: I574348951f06b749aeff986589186110580328bc
This avoids error messages about re-registering the same TS 102 222
commands during executing the 'equip' command.
Change-Id: I3567247fe84e928e3ef404c07eff8250ef04dfe9
In a previous patch the dependency on cmd2 was changed from cmd2==1.5 to
cmd2>=1.5. After this was merged, this lead to the docker images getting
rebuilt and now having a higher cmd2 version that gets used in the CI
checks. So while the patch was in review, pylint was actually running
with a lower cmd2 version and was taking different code paths.
Fix for:
pySim-shell.py:30:4: E0611: No name 'fg' in module 'cmd2' (no-name-in-module)
pySim-shell.py:30:4: E0611: No name 'bg' in module 'cmd2' (no-name-in-module)
pySim-shell.py:154:8: E1123: Unexpected keyword argument 'use_ipython' in method call (unexpected-keyword-arg)
pySim-shell.py:171:30: E1120: No value for argument 'settable_object' in constructor call (no-value-for-parameter)
pySim-shell.py:173:30: E1120: No value for argument 'settable_object' in constructor call (no-value-for-parameter)
pySim-shell.py:175:30: E1120: No value for argument 'settable_object' in constructor call (no-value-for-parameter)
pySim-shell.py:176:30: E1120: No value for argument 'settable_object' in constructor call (no-value-for-parameter)
Fixes: f8a3d2b3 ("requirements.txt: allow cmd2 versions greater than 1.5")
Fixes: OS#6034
Change-Id: I182d3a2b87e70ed551a70c88d3d531a36bf53f53
cmd2.fg and cmd2.bg have been deprecated in cmd2 2.3.0 and removed
in cmd2 2.4.0. Let's work around this by a version check.
Related upstream commits:
(See also: https://github.com/python-cmd2/cmd2)
Commit f57b08672af97f9d973148b6c30d74fe4e712d14
Author: Kevin Van Brunt <kmvanbrunt@gmail.com>
Date: Mon Oct 11 15:20:46 2021 -0400
and
Commit f217861feae45a0a1abb56436e68c5dd859d64c0
Author: Kevin Van Brunt <kmvanbrunt@gmail.com>
Date: Wed Feb 16 13:34:13 2022 -0500
Change-Id: I9fd32c0fd8f6d40e00a318602af97c288605e8e5
In version 2.0.0, the use_ipython parameter in the Cmd constructor is
renamed to include_ipy. There are still plenty of older cmd2
installations around, so let's work around this using a version check.
See also: https://github.com/python-cmd2/cmd2
Commit: 2397280cad072a27a51f5ec1cc64908039d14bd1
Author: Kevin Van Brunt <kmvanbrunt@gmail.com>
Date: 2021-03-26 18:56:33
This commit is based on pySim gerrit changes:
Ifce40410587c85ae932774144b9548b154ee8ad0
I19d28276e73e7024f64ed693c3b5e37c1344c687
Change-Id: Ibc0e18b002a03ed17933be4d0b4f4e86ad99c26e
In cmd2 relase 2.0.0 the constructor of Settable adds a settable_object
parameter, which apparantly was optional at first, but then became
mandatory. Older versions must not have the settable_object parameter
but versions from 2.0.0 on require it. Let's add a version check so that
we stay compatible to cmd2 versions below and above 2.0.0.
See also: https://github.com/python-cmd2/cmd2
Commit 486734e85988d0d0160147b0b44a37759c833e8a
Author: Eric Lin <anselor@gmail.com>
Date: 2020-08-19 20:01:50
and
Commit 8f981f37eddcccc919329245b85fd44d5975a6a7
Author: Eric Lin <anselor@gmail.com>
Date: 2021-03-16 17:25:34
This commit is based on pySim gerrit change:
Ifce40410587c85ae932774144b9548b154ee8ad0
Change-Id: I38efe4702277ee092a5542d7d659df08cb0adeff
R-UIM (CDMA) cards are pretty much like the normal GSM SIM cards and
"speak" the same 2G APDU protocol, except that they have their own file
hierarchy under MF(3f00)/DF.CDMA(7f25). They also have DF.TELECOM(7f10)
and even DF.GSM(7f20) with a limited subset of active EFs. The content
of DF.CDMA is specified in 3GPP2 C.S0023-D.
This patch adds a very limited card profile for R-UIM, including auto-
detecion and a few EF definitions under DF.CDMA. This may be useful
for people willing to explore or backup their R-UIMs. To me this was
useful for playing with an R-UIM card from Skylink [1] - a Russian
MNO, which provided 450 MHz CDMA coverage until 2016.
[1] https://en.wikipedia.org/wiki/Sky_Link_(Russia)
Change-Id: Iacdebdbc514d1cd1910d173d81edd28578ec436a
It may sometimes be helpful to get a bit of general information about
the card. To sort out problems it sometimes helps to get an idea what
card type and ICCID pySim-shell has in memory.
Change-Id: If31ed17102dc0108e27a5eb0344aabaaf19b19f9
Register a ProactiveHandler with pySim.transport and call the decoder
from pySim.cat to print a decoded version:
Example usage (exact data only works on my specific card due to the
encrpyted payload):
pySIM-shell (MF/ADF.USIM)> envelope_sms 400881214365877ff6227052000000000302700000201506393535b000118dd46f4ad6b015922f62292350d60af4af191adcbbc35cf4
FETCH: d0378103011300820281838b2c410008812143658700f621027100001c12b000119660ebdb81be189b5e4389e9e7ab2bc0954f963ad869ed7c
SendShortMessage(CommandDetails({'command_number': 1, 'type_of_command': 19, 'command_qualifier': 0}),DeviceIdentities({'source_dev_id': 'uicc', 'dest_dev_id': 'network'}),SMS_TPDU({'tpdu': '410008812143658700f621027100001c12b000119660ebdb81be189b5e4389e9e7ab2bc0954f963ad869ed7c'}))
SW: 9000, data: d0378103011300820281838b2c410008812143658700f621027100001c12b000119660ebdb81be189b5e4389e9e7ab2bc0954f963ad869ed7c
Change-Id: Ia4cdf06a44f46184d0da318bdf67077bc8ac9a1a
Reduce all the copy+pasted '/'.join(path_list) constructs with
a method returning the formatted path string.
Change-Id: I5e9bfb425c3a3fade13ca4ccd2b891a0c21ed56d
cards can have multiple logical channels; each logical channel
has its own state of what is the current selected file + application.
Let's split the RuntimeState class into the global RuntimeState and the
per-lchan-specific RuntimeLchan class.
This code doesn't actually introduce any code that uses lchans other
than the basic logical channel (0), but just modifies the data model
to accomodate those in the future.
Change-Id: I7aa994b625467d4e46a2edd8123240b930305360
ETSI TS 102 221, Table 9.3 specifies 0x0A as default key reference for
ADM1. Lets make sure pySim-shell uses this key-reference if the card is
a generic UICC.
Change-Id: I8a96244269dc6619f39a5369502b15b83740ee45
When we run the exporter we also get an error summary at the end.
However, if walk() throws an eception this stops the exporter
immediately and we won't get the summpary. Lets catch exceptions from
walk as well so that we are able to end gracefully.
Change-Id: I3edc250ef2a84550c5b821a72e207e4d685790a5
The walk() method that we use to traverse the whole file system tree is
currently only able to execute action callbacks on EFs. Lets add a
mechanism that allows us to have a second callback that is executed when
we hit a DF or ADF.
Change-Id: Iabcd78552a14a2d3f8f31273dda7731e1f640cdb
The apdu command is used to communicate with the card on the lowest
possible level. Lets make it available even before a card profile (rs)
is avalable. This is especially useful when the card has no files on it,
in this situation pySim-shell will not be able to assign a profile to
the card at all. We can then use the apdu command to equip the card with
the most basic files and start over.
Change-Id: I601b8f17bd6af41dcbf7bbb53c75903dd46beee7
The as_json parameter has been added as an additional parameter to the
export function. Lets use a dictionary here and put the parameter in it.
This makes it easier to add more options in the future
Change-Id: Ie860eec918e7cdb01651642f4bc2474c9fb1924f
* don't duplicate information between .rst files and docstrings
* if there's more than a trivial single-line documentation, put it as
docstring into the python source and use ".. argparse" to pul it into
the manual
* add documentation for some commands for which it was missing
* show one level deeper in the navigation table, listing the commands
Change-Id: Ib88bb7d12faaac7d149ee1f6379bc128b83bbdd5
The FCP template provides us a lot of context, like the permissions of
a given file. Let's make it part of the 'export' output, both in raw
and in decoded form.
Change-Id: I05f17bbebd7a9b3535204b821900851a5f66e88f
Closes: OS#5457
This adds support for creating/deleting and terminating files,
as well as support for permanent card termination.
Change-Id: I5b1ffb1334afa18d62beb642268066a30deb7ea6
This can be useful when playing around with cards, for example
sending commands for which pySim-shell doesn't yet have proper support.
Change-Id: Ib504431d26ed2b6f71f77a143ff0a7fb4f5ea02e
Harald Welte
Philipp Maier
iw0
Oliver Smith
Vadim Yanitskiy
Vadim Yanitskiy