This commit introduces
* the osmo-smdpp.py program implementing the main procedures and the
HTTP/REST based ES9+
* python modules for ES8+ and non-volatile RSP Session State storage
* the ASN.1 source files required to parse/encode RSP
* 3GPP test certificates from SGP.26
* an unsigned profile package (UPP) of a SAIP v2.3 TS48 test profile
As I couldn't get the 'Klein' tls support to work, the SM-DP+ code
currently does not support HTTPS/TLS but plan HTTP, so you either have
to modify your LPA to use HTTP instead of HTTPS, or put a TLS proxy in
front.
I have successfully installed an eSIM profile on a test eUICC that
contains certificate/key data within the test CI defined in GSMA SGP.26
Change-Id: I6232847432dc6920cd2bd08c84d7099c29ca1c11
Let's add a proper argparser instance for the 'verify_adm' command,
avoiding situations where the user types 'verif_adm --help' and then
--help is interpreted as the PIN value, removing one more attempt from
the failed ADM1 counter.
Let's use that opportunity to improve the documentation of the command.
Change-Id: I3321fae66a11efd00c53b66c7890fce84796e658
pySim-shell output has changed over time, so some examples were
showing outdated content. Let's update those.
Change-Id: I4058719c32b61689522e90eba37253e8accb8ba5
this is far from being complete, just some basic first commands
to get the certificates and eIM configuration.
Change-Id: Ie05108e635ed9c6de10f0ba431cb1b13893f6be8
This just adds basic support for the ISD-R application and its
associated STORE DATA command which is used for the ES10x interfaces
between off-card entities and the on-card ISD-R.
Change-Id: Ieab37b083e25d3f36c20f6e9ed3e4bdfdd14a42a
Closes: OS#5637
Now that pySim-shell can switch between logical channels, let's state
the currently used logical channel in the prompt.
Change-Id: I45781a6fba205eeb4ac7f58d5cb642b7131bdd88
Related: OS#6230
We've already had the 'open_channel' and 'close_channel' commands,
which were sent to (and acknowledged by) the card. However,
those commands didn't affect the pySim-shell state, i.e. all
communication would still happen through the default channel '0'.
With this patch we introduce a 'switch_channel' command, using which
the user can determine which of the (previously opened) logical channels
shall be used by pySim-shell.
Change-Id: Ia76eb45c4925882ae6866e50b64d9610bd4d546d
Closes: OS#6230
This fixes the below error during build of the documentation:
pysim/docs/shell.rst:349: ERROR: "<class 'pySim-shell.PySimCommands'>" has no attribute "apdu_cmd_parser"
Change-Id: If89b66a45ea18b5a3fc56bf77b05e679463da5a8
The get_data shell command didn't have any interactive help / syntax,
and no meaningful error message in case an unknown data object name
was specified by the user. Let's fix that.
Change-Id: I09faaf5d45118635cf832c8c513033aede1427e5
This is important to produce the right command syntax when generating
command line reference in the user manual. However, we shouldn't add
this kludge to the individual programs, but only to the documentation
using the :prog: syntax.
Change-Id: I2ec7ab00c63d5d386f187e54755c71ffc2dce429
We've had a "suspend_uicc" command since commit
ec95053249 in 2021, but didn't yet
have the corresponding "resume" pair.
Note that you cannot really execute this in a reasonable way from
within pySim, as it is required to power-cycle the card
between SUSPEND and RESUME, see TS 102 221 Section 11.1.22.3.2
Change-Id: I3322fde74f680e77954e1d3e18a32ef5662759f2
The SUSPEND UICC command is a TS 102 221 (UICC) command, so move
it to the UICC Card Profile.
Also, make sure that any shell command sets specified in the
CardProfile are actually installed during equip().
Change-Id: I574348951f06b749aeff986589186110580328bc
This file is rather important for 5G SA operation, so we should have
a proper encoder/decoder in place.
Change-Id: I1b37fdfc2807976880b2cafb61951f08eebeb344
Just like the existing commands for UST/IST: Allow the user to
activate/deactivate individual services. As EF.SST also contains
information about "allocation" of a service, let's have commands for
allocation and activation.
Change-Id: If959d06248cb1a9d2c0a21cdd40d438726cbc5f0
Adjust the catch-all target at the end of the Makefile that is supposed
to route all unknown targets to sphinx, so it doesn't do this for the
shrink target. The shrink target has recently been added to
Makefile.common.inc in osmo-gsm-manuals, which gets included right above
the catch-all target. So it isn't an unknown target, but for some reason
the sphinx catch-all runs in addition to the shrink target (runs
shrink-pdfs.sh, see output below) and fails. As I did not add the
catch-all logic, preserve it but add an exception for the shrink rule.
Fix for:
+ make -C docs publish publish-html
make: Entering directory '/build/docs'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh _build/latex/osmopysim-usermanual.pdf
* _build/latex/osmopysim-usermanual.pdf: 272K (shrunk from 336K)
Running Sphinx v5.3.0
Sphinx error:
Builder name shrink not registered or available through entry point
Related: SYS#6380
Change-Id: If2802bb93909aba90debe5e03f3047cec73e2f54
This adds pySim-shell support for the RESIZE FILE command in order
to change the size of linear fixed or transparent EF.
Change-Id: I03fbb683e26231c75f345330ac5f914ac88bbe7a
These commands can be used to decode a user-provided hex-string,
instead of decoding the data read from the file. This is useful
for quickly manually decoding some values read from other locations,
such as e.g. copy+pasted from a eSIM profile in ASN.1 value notation.
Change-Id: I81f73bce2c26e3e5dfc7538d223bb2d2483c7fa0
* don't duplicate information between .rst files and docstrings
* if there's more than a trivial single-line documentation, put it as
docstring into the python source and use ".. argparse" to pul it into
the manual
* add documentation for some commands for which it was missing
* show one level deeper in the navigation table, listing the commands
Change-Id: Ib88bb7d12faaac7d149ee1f6379bc128b83bbdd5
This introduces support for talking to the ARA-M application on a card,
as specified in the GlobalPlatform "Secure Element Access Control"
specification v1.1.
Change-Id: Ia9107a4629c3d68320f32bbd4dd26e1f430717da
A number of new commands were recently introduced without proper
coverage in the documentation (user manual). This includes equip,
bulk_script and others.
Change-Id: Ide7ba68ad90f6e5c2a41a2e3de22534258ebb7fd
This introduces a new TLV library that heavily builds upon python object
oriented concepts. Contrary to classic TLV parsers it doesn't focus on
the structure of Tag, Length and binary Value only, but it supports
actual decoding/interpretation of the value part into some kind of JSON
serializable dict. The latter can be achieved by imperative
encode/decode methods, or by using our existing declarative 'construct'
based approach.
The TLV library supports both BER-TLV and COMPREHENSION-TLV for both
nested and non-nested TLV definitions.
As an example we include TLV definitions for a number of CAT (Card
Application Toolkit) IEs.
Change-Id: I7fc1699443bc9d8a4e7cdd2687af9af7cc03c30e
This adds support for a new EF file type: BER-TLV files. They are
different from transparent and linear fixed EFs in that they neither
operate on a byte stream nor fixed-sized records, but on BER-TLV encoded
objects. One can specify a tag value, and the card will return the
entire TLV for that tag.
As indicated in the spec, the magic tag value 0x5C (92) will return a
list of tags existing in the file.
Change-Id: Ibfcce757dcd477fd0d6857f64fbb4346d6d62e63
Now that we have a shared argparse definition for all reader related
options in the transport module, use that.
Change-Id: I12ca1a484a5d6e84820d9761c9701f8a94381f66
We're using argparse internally for all shell commands, and can
use that to auto-generate command reference in the manual.
Let's switch to argparse for the main program, too - and generate
the related reference in the manual.
Change-Id: I77c946dbeb9f746fe3d8051173e59462dc2fb5e2