sdr
/
rtl-sdr
8
1
Fork 5
Code Issues Pull Requests Projects Releases Wiki Activity

FC0012 doc and fixes 

Fix selection of VCO band (needed for example to get to 166 MHz) for
the FC0012 tuner, and add a lot of register descriptions.

Signed-Off-by: Michael Karcher <osmosdr@mkarcher.dialup.fu-berlin.de>

Signed-off-by: Steve Markgraf <steve@steve-m.de>
This commit is contained in:
Michael Karcher 2012-05-24 08:42:04 +02:00 committed by Steve Markgraf
parent 6328438479
commit c4c48a69ea
1 changed files with 33 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
src/tuner_fc0012.c
View File

@ -20,21 +20,35 @@
/* Incomplete list of register settings:
*
* Name Reg Bits Desc
* CHIP_ID 0x00 0-7 Chip ID (constant 0xA1)
* RF_A 0x01 0-3 Number of count-to-9 cycles in RF
* divider (suggested: 2..9)
* RF_M 0x02 0-7 Total number of cycles (to-8 and to-9)
* in RF divider
* RF_K_HIGH 0x03 0-6 Bits 8..14 of fractional divider
* RF_K_LOW 0x04 0-7 Bits 0..7 of fractional RF divider
* RF_OUTDIV_A 0x05 3-7 Power of two required?
* LNA_POWER_DOWN 0x06 0 Set to 1 to switch off low noise amp
* VCO_SPEED 0x06 3 Set the speed of the VCO. example
* driver hardcodes to 1 for some reason
* RF_OUTDIV_B 0x06 1 Set to select 3 instead of 2 for the
* RF output divider
* VCO_SPEED 0x06 3 Select tuning range of VCO:
* 0 = Low range, (ca. 1.1 - 1.5GHz)
* 1 = High range (ca. 1.4 - 1.8GHz)
* BANDWIDTH 0x06 6-7 Set bandwidth. 6MHz = 0x80, 7MHz=0x40
* 8MHz=0x00
* XTAL_SPEED 0x07 5 Set to 1 for 28.8MHz Crystal input
* or 0 for 36MHz
* <agc params> 0x08 0-7
* EN_CAL_RSSI 0x09 4 Enable calibrate RSSI
* (Receive Signal Strength Indicator)
* LNA_FORCE 0x0d 0
* AGC_FORCE 0x0d ?
* LNA_GAIN 0x13 0-4 Low noise amp gain
* LNA_GAIN 0x13 3-4 Low noise amp gain
* LNA_COMPS 0x15 3 ?
* VCO_CALIB 0x0e 7 Set high then low to calibrate VCO
*
* (fast lock?)
* VCO_VOLTAGE 0x0e 0-6 Read Control voltage of VCO
* (big value -> low freq)
*/
/* glue functions to rtl-sdr code */
@ -99,12 +113,11 @@ void FC0012_Dump_Registers()
DEBUGF("LNA Force:\t%s\n", (regBuf & 0x1) ? "Forced" : "Not Forced");
FC0012_Read(pTuner, 0x13, &regBuf);
DEBUGF("LNA Gain:\t");
switch (regBuf) {
case (0x10): DEBUGF("19.7dB\n"); break;
case (0x17): DEBUGF("17.9dB\n"); break;
case (0x08): DEBUGF("7.1dB\n"); break;
case (0x02): DEBUGF("-9.9dB\n"); break;
default: DEBUGF("unknown gain value 0x02x\n");
switch (regBuf & 0x18) {
case (0x00): DEBUGF("Low\n"); break;
case (0x08): DEBUGF("Middle\n"); break;
case (0x10): DEBUGF("High\n"); break;
default: DEBUGF("unknown gain value 0x18\n");
}
#endif
}
@ -173,7 +186,7 @@ void FC0012_Frequency_Control(unsigned int Frequency, unsigned short Bandwidth)
int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Bandwidth)
{
int VCO1 = 0;
int VCO_band = 0;
unsigned long doubleVCO;
unsigned short xin, xdiv;
unsigned char reg[21], am, pm, multi;
@ -230,7 +243,7 @@ int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Ba
doubleVCO = Frequency * multi;
reg[6] = reg[6] | 0x08;
VCO1 = 1;
VCO_band = 1;
xdiv = (unsigned short)(doubleVCO / (CrystalFreqKhz / 2));
if( (doubleVCO - xdiv * (CrystalFreqKhz / 2)) >= (CrystalFreqKhz / 4) )
xdiv = xdiv + 1;
@ -269,7 +282,6 @@ int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Ba
if (FC0012_Write(pTuner, 0x03, reg[3])) return -1;
if (FC0012_Write(pTuner, 0x04, reg[4])) return -1;
//reg[5] = reg[5] | 0x07; // This is really not cool. Why is it there?
// Same with hardcoding VCO=1
if (FC0012_Write(pTuner, 0x05, reg[5])) return -1;
if (FC0012_Write(pTuner, 0x06, reg[6])) return -1;
@ -277,16 +289,19 @@ int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Ba
if (FC0012_Write(pTuner, 0x0E, 0x80)) return -1;
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1;
// VCO Re-Calibration if needed
// Read resulting VCO control voltage
if (FC0012_Write(pTuner, 0x0E, 0x00)) return -1;
if (FC0012_Read(pTuner, 0x0E, &read_byte)) return -1;
reg[14] = 0x3F & read_byte;
if (VCO1)
// Adjust VCO range if control voltage is at the limit
if (VCO_band)
{
// high-band VCO hitting low frequency bound
if (reg[14] > 0x3C)
{
reg[6] = 0x08 | reg[6];
// select low-band VCO
reg[6] = ~0x08 & reg[6];
if (FC0012_Write(pTuner, 0x06, reg[6])) return -1;
if (FC0012_Write(pTuner, 0x0E, 0x80)) return -1;
@ -295,7 +310,9 @@ int FC0012_SetFrequency(void *pTuner, unsigned long Frequency, unsigned short Ba
}
else
{
// low-band VCO hitting high frequency bound
if (reg[14] < 0x02) {
// select high-band VCO
reg[6] = 0x08 | reg[6];
if (FC0012_Write(pTuner, 0x06, reg[6])) return -1;