Osmcoom ADS-B test signal generator https://osmocom.org/projects/sdr
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
Harald Welte bdced7045d add ads-b transmission script without GUI requirement 8 years ago
examples initial check-in of Mode-S / ADS-B test data generator 8 years ago
gr-adsbtx use 200 symbols for both lead-in and lead-out 8 years ago
.gitignore initial check-in of Mode-S / ADS-B test data generator 8 years ago
Makefile initial check-in of Mode-S / ADS-B test data generator 8 years ago
README Add gr-adsbtx as a proper packaged gnuradio block 8 years ago
adsb_gen.c initial check-in of Mode-S / ADS-B test data generator 8 years ago
adsb_gen.grc use 200 symbols for both lead-in and lead-out 8 years ago
adsb_tx_laforge_nogui.py add ads-b transmission script without GUI requirement 8 years ago
file_tx_usrp2.grc initial check-in of Mode-S / ADS-B test data generator 8 years ago

README

Osmocom ADS-B generator/transmitter
(C) 2014-2015 by Harald Welte <laforge@gnumonks.org>
======================================================================
adsb_gen - ADS-B / Mode-S transmitter

WARNING: ONLY USE THIS TOOL WITH DIRECT COAXIAL CABLE CONNECTION BETWEEN
TRANSMITTER AND RECEIVER OR INSIDE A SHIELDED CHAMBER. ADS-B OPERATES ON
LICENSED SPECTRUM AND THE AUTHOR IS NOT RESPONSIBLE FOR IMPROPER USE OF
THIS TOOL.

This is a small toolset for generating Mode-S / ADS-B test data,
intended for testing ADS-B receivers. This includes production testing
but also comparison of various receivers against each other in terms of
sensitivity.

This is very early PoC code and can probably do with lots of
improvements, particularly related to the modulation depth, transmit
power, etc.

There are two ways of using the project:

1) Old style (with gnuradio before it had PDU abstraction)

The idea is as follows:

* provide a text file with ADS-B sentences in regular encoding like
'*8D48415F600796758E', one sentence on every line.

* call adsb_gen with the synax '[-p pause_usec] <infname> <outfname>'
where infname is the name of the ASCII input file and outfname is the
binary.

* the above will generate the output file whihc contains the coded ADS-B
data at one unsigned byte per bit at 2MS/s sample rate.

* you can use the file_to_usrp2.grc gnuradio companion block to actually
send this file in an endless loop.

* the '-p' parameter can be used to configure the gap between subsequent
ADS-B sentences (specified in microseconds). The default is 1s.


2) New style (with gnuradio 3.7)

* Build the gr-adsbtx module like usual using cmake/make

* Run the adsb_gen.grc flow graph in gnuradio-companiion

* Connect to localhost port 52002 and send ADS-B sentences
to it