259 lines
8.2 KiB
Plaintext
259 lines
8.2 KiB
Plaintext
[general]
|
|
; This section sets global variables of the MGCP Call Agent module
|
|
|
|
; priority: int: Priority of the chan.rtp message handler
|
|
;priority=80
|
|
|
|
; rfc2833: bool: Offer RFC2833 telephone-event by default
|
|
; A numeric payload >= 96 can be provided
|
|
;rfc2833=yes
|
|
|
|
; tzoffset: int: Timezone offset from GMT in seconds for sending Caller ID
|
|
; Positive to go East, negative to go West
|
|
; Examples: CET=3600, EST=-18000
|
|
; This parameter is reloadable
|
|
;tzoffset=0
|
|
|
|
|
|
[engine]
|
|
; These parameters are used to initialize the MGCP Engine
|
|
|
|
; enabled: bool: Enable the MGCP engine
|
|
;enabled=yes
|
|
|
|
; address: ipaddress: Local IP address to bind to, default all interfaces
|
|
;address=0.0.0.0
|
|
|
|
; port: int: UDP port to bind, set to zero to use default MGCP CA port (2727)
|
|
;port=
|
|
|
|
; Maximum received packet size, 1500 to 65528, default 1500
|
|
;max_recv_packet=1500
|
|
|
|
; buffer: int: Requested size of socket's receive buffer, 0 for system default
|
|
; Minimum value is 4096
|
|
;buffer=0
|
|
|
|
; request_ack: bool: Request an Acknowledge of the transactions
|
|
;request_ack=yes
|
|
|
|
; send_provisional: bool: Send 1xx provisional answers to the requests
|
|
;send_provisional=yes
|
|
|
|
; retrans_interval: int: Message retransmission interval in msec
|
|
;retrans_interval=250
|
|
|
|
; retrans_count: int: Maximum number of retransmissions
|
|
;retrans_count=3
|
|
|
|
|
|
[endpoint]
|
|
; Settings for the local endpoint
|
|
|
|
; user: string: The user part of the local endpoint
|
|
;user=yate
|
|
|
|
; host: string: The host part of the local endpoint, default engine's address
|
|
;host=
|
|
|
|
; port: int: Declared local port, defaults to engine's port
|
|
;port=
|
|
|
|
|
|
[codecs]
|
|
; This section allows to individually enable or disable the codecs
|
|
|
|
; default: bool: Enable all unlisted codecs by default if a transcoder exists
|
|
;default=enable
|
|
|
|
; default_stereo: bool: Enable all unlisted stereo audio codecs by default if a transcoder exists
|
|
;default_stereo=no
|
|
|
|
; mulaw: bool: Companded-only G711 mu-law (PCMU/8000)
|
|
;mulaw=default
|
|
|
|
; alaw: bool: Companded-only G711 a-law (PCMU/8000)
|
|
;alaw=default
|
|
|
|
; gsm: bool: European GSM 06.10 (GSM/8000)
|
|
;gsm=default
|
|
|
|
; lpc10: bool: Linear Prediction Codec (LPC/8000)
|
|
;lpc10=default
|
|
|
|
; ilbc: bool: Internet Low Bandwidth Codec (iLBC/8000)
|
|
;ilbc=default
|
|
|
|
; amr: bool: Adaptive Multi-Rate 3GPP (AMR/8000)
|
|
;amr=default
|
|
|
|
; slin: bool: Signed Linear 16-bit uncompressed (L16/8000)
|
|
;slin=default
|
|
|
|
; g723: bool: ITU G.723 all variations (G723/8000)
|
|
;g723=default
|
|
|
|
; g726: bool: ITU G.726 32-bit (G726-32/8000)
|
|
;g726=default
|
|
|
|
; g728: bool: ITU G.728 all variations (G728/8000)
|
|
;g728=default
|
|
|
|
; g729: bool: ITU G.729 all variations (G729/8000)
|
|
;g729=default
|
|
|
|
; g729_annexb: bool: G.729 Annex B (VAD) support default (if not in SDP)
|
|
; NOTE: RFC 3555 specifies the default should be yes
|
|
;g729_annexb=no
|
|
|
|
; amr_octet: bool: Octet aligned AMR RTP payload default (if not in SDP)
|
|
; NOTE: RFC 4867 (and older 3267) specifies the default is bandwidth efficient
|
|
;amr_octet=no
|
|
|
|
; 2*mulaw: bool: Stereo Companded-only G711 mu-law (PCMU/8000)
|
|
;2*mulaw=default_stereo
|
|
|
|
; 2*alaw: bool: Stereo Companded-only G711 a-law (PCMU/8000)
|
|
;2*alaw=default_stereo
|
|
|
|
; 2*slin: bool: Stereo Signed Linear 16-bit uncompressed (L16/8000)
|
|
;2*slin=default_stereo
|
|
|
|
|
|
[hacks]
|
|
; This section holds the dirty stuff required to work with some broken
|
|
; implementations
|
|
;
|
|
; ilbc_forced: string: Format to force as iLBC, can be: ilbc20 or ilbc30
|
|
;ilbc_forced=
|
|
;
|
|
; ilbc_default: string: Format to use for iLBC when packetization is unknown
|
|
;ilbc_default=ilbc30
|
|
|
|
; g729_annexb: bool: Force G.729 Annex B support when parsing the SDP
|
|
;g729_annexb=
|
|
|
|
; ignore_sdp_port: bool: Ignore SDP changes if only the port is different
|
|
; This allows preserving the local RTP session and port
|
|
;ignore_sdp_port=no
|
|
|
|
|
|
;[gw PUT_NAME_HERE]
|
|
; One gw ... section is required for each gateway we control
|
|
; The gateway name is a string that can be referenced from other modules
|
|
|
|
; user: string: Remote MGCP resource name
|
|
;user=
|
|
|
|
; host: ipaddress: IP address or hostname of the gateway, mandatory
|
|
;host=
|
|
|
|
; port: int: Remote port to send packets to
|
|
; Zero uses the protocol default 2427
|
|
; A negative value suppresses :port at end of ID
|
|
; A value of -1 uses default 2427 but doesn't add at end of ID
|
|
;port=2427
|
|
|
|
; address: ipaddress: IP address of the gateway
|
|
; If present will override resolving the host name and will immediately make
|
|
; the span operational without waiting for a remote RSIP
|
|
; A boolean true value will resolve the host to an address at startup
|
|
;address=
|
|
|
|
; version: string: Protocol name and version to use initially, if left blank
|
|
; will autodetect from first received RSIP, until then uses MGCP 1.0
|
|
; Depending on remote capabilities and settings it is possible to use the SGCP
|
|
; or TGCP protocols too.
|
|
;version=
|
|
|
|
; range: string: Range of gateways to create using this section as a template
|
|
; If range is not empty the "user" setting must contain an asterisk
|
|
; Example for creating aaln1/[1-10], aaln2/[1-10], aaln3/[1-10] and aaln6/[1-10]:
|
|
; user=aaln*/1
|
|
; chans=10
|
|
; range=1-3,6
|
|
;range=
|
|
|
|
; cluster: bool: This is the gateway to send remote RTP commands to
|
|
; Do not activate this functionality unless you know very well what it does
|
|
; as it disrupts other based RTP protocols
|
|
;cluster=no
|
|
|
|
; voicechans: string: The range of channels used for voice (data) transfer
|
|
; Channel intervals may be specified by separating the margins using the '-' character
|
|
; Individual channels or channel intervals may be separated by '.'
|
|
; Duplicate or not strict positive channel numbers are not allowed
|
|
; If specified the highest circuit number is used as number of PSTN channels
|
|
; E.g. 1-15.17-31 or 1-23 or 1.2.3-15.17.18-30.31
|
|
;voicechans=
|
|
|
|
; chans: integer: Number of PSTN circuits to create in span
|
|
; Defaults to 1 or highest voicechan declared
|
|
;chans=1
|
|
|
|
; offset: integer: Offset of circuit code relative to start in span
|
|
; The parameter offset_NAME_OF_SPAN overrides this (useful for templates)
|
|
;offset=0
|
|
|
|
; start: integer: Absolute start of circuits numbers, ignore group's start
|
|
; Default is offset + group's current start
|
|
; The parameter start_NAME_OF_SPAN overrides this (useful for templates)
|
|
;start=
|
|
|
|
; increment: integer: How much will increment this span the circuit number in
|
|
; the group it belongs to
|
|
; Defaults to 32 if chans is 30 or 31 (E1), 24 if chans is 23 (T1), number of
|
|
; circuits in all other cases
|
|
; The parameter increment_NAME_OF_SPAN overrides this (useful for templates)
|
|
;increment=
|
|
|
|
; clearconn: bool: Clear all connections of remote endpoints when initialized
|
|
;clearconn=no
|
|
|
|
; bearer: keyword: Default bearer encoding
|
|
; Allowed values: mulaw, alaw
|
|
; If bearer is set a default encoding is assumed on the circuit side and a
|
|
; B: e:mu or B: e:A line is added only if the circuit data format changes
|
|
; Normally the default bearer is not set so a B: line is added when needed
|
|
;bearer=
|
|
|
|
; match_ntfy: bool: Strict match the X: id in NTFY against the local value
|
|
; This can cause trouble with FXS/FXO persistent notifications
|
|
;match_ntfy=yes for digital gateways, no for analogic
|
|
|
|
; req_fax: bool: Request Fax Tone detection from gateway
|
|
; This requests notification for G/ft (Generic package, Fax Tone)
|
|
;req_fax=yes
|
|
|
|
; req_t38: bool: Request Fax Relay detection from gateway
|
|
; This requests notification for fxr/t38 (Fax Relay, T.38)
|
|
; The default is taken from the req_fax setting
|
|
;req_t38=
|
|
|
|
; req_evts: string: Requested Events in MGCP format, overrides default
|
|
; Default depends on endpoint configuration and fax setting
|
|
;req_evts=
|
|
|
|
; req_dtmf: keyword: When to request DTMF and fax notification from gateway
|
|
; Allowed values:
|
|
; none - do not request to be notified about DTMF and fax events
|
|
; once - emit RQNT once when connecting the circuit (default)
|
|
; more - emit RQNT on connection and after each notification received
|
|
;req_dtmf=once
|
|
|
|
; req_embed: boolean: Embed Request Notify in the CRCX message
|
|
; This setting applies only to digital gateways, not FXS or FXO
|
|
;req_embed=yes
|
|
|
|
; req_check: boolean: Allow the Request Notify when the circuit is in continuity check mode
|
|
; This setting applies only to digital gateways, not FXS or FXO
|
|
;req_check=yes
|
|
|
|
; forward_rtp: bool: Support to forward RTP directly to protocols that support it
|
|
; The actual direct RTP forwarding is still negotiated in routing
|
|
; The special value "always" (only for digital gateways) inhibits initial local RTP
|
|
;forward_rtp=yes for digital gateways, no for analogic
|
|
|
|
; forward_sdp: bool: Also include the raw SDP in the RTP forward offer
|
|
;forward_sdp=no
|