[general]
; This section sets global variables of the implementation

; port: int: SIP UDP port
;port=5060

; addr: ipaddress: IP address to bind to
;addr=0.0.0.0

; useragent: string: String to set in User-Agent or Server headers
;useragent=YATE/1.1.0

; realm: string: Authentication realm to offer in authentication requests
;realm=Yate

; transfer: bool: Allow handling the REFER message to perform transfers
;transfer=enable

; registrar: bool: Allow the SIP module to receive registration requests
;registrar=enable

; options: bool: Build and send a default 200 answer to OPTIONS requests
;options=enable

; prack: bool: Enable acknowledging provisional 1xx answers (RFC 3262)
;prack=disable

; info: bool: Accept incoming INFO messages
;info=enable

; fork: bool: Follow first forked 2xx answer on early dialogs
;fork=enable

; progress: bool: Send an "183 Session Progress" just after successfull routing
;progress=disable

; generate: bool: Allow Yate messages to send arbitrary SIP client transactions
;generate=disable

; nat: bool: Enable automatic NAT support
;nat=enable

; ignorevia: bool: Ignore Via headers and send answer back to the source
;ignorevia=enable

; dtmfinband: bool: Generate DTMF inband by default
;dtmfinband=no

; dtmfinfo: bool: Generate INFO messages to send keypad tones
;dtmfinfo=no

; privacy: bool: Process and generate privacy related SIP headers
;privacy=disable

; forward_sdp: bool: Include the raw SDP body to be used as-is for forwarding RTP
;forward_sdp=disable

; rtp_start: bool: Start RTP when sending 200 on incoming instead of receiving ACK
;rtp_start=disable

; multi_ringing: bool: Accept provisional (1xx) messages even after 180 Ringing
;multi_ringing=disable


[registrar]
; Controls the behaviour when acting as registrar

; expires_min: int: Minimum allowed expiration time in seconds
;expires_min=60

; expires_def: int: Default expiration time if not present in REGISTER request
;expires_def=600

; expires_max: int: Value used to limit the expiration time to something sane
;expires_max=3600

; auth_required: bool: Automatically challenge all clients for authentication
;auth_required=enable


[codecs]
; This section allows to individually enable or disable the codecs

; default: bool: Enable all unlisted codecs by default
;default=enable

; mulaw: bool: Companded-only G711 mu-law (PCMU/8000)
;mulaw=default

; alaw: bool: Companded-only G711 a-law (PCMU/8000)
;alaw=default

; gsm: bool: European GSM 06.10 (GSM/8000)
;gsm=default

; lpc10: bool: Linear Prediction Codec (LPC/8000)
;lpc10=default

; slin: bool: Signed Linear 16-bit uncompressed (L16/8000)
;slin=default

; g723: bool: ITU G.723 all variations (G723/8000)
;g723=default

; g726: bool: ITU G.726 32-bit (G726-32/8000)
;g726=default

; g728: bool: ITU G.728 all variations (G728/8000)
;g728=default

; g729: bool: ITU G.729 all variations (G729/8000)
;g729=default


[methods]
; Use this section to allow server processing of various SIP methods by
;  handling Yate messages.
; Each line has to be of the form:
;  methodname=boolean
; You must use lower case method names. The boolean value defaults to
;  true and allows automatically challenging the requests for authentication